{"product_id":"marinco-71012-12v-waterproof-wiper-motor","title":"Marinco 71012 12V Waterproof Wiper Motor with 110-Degree Sweep","description":"\u003cp class=\"nvn-hero\"\u003eThe Marinco 71012 is a 12-volt, two-speed waterproof wiper motor with a 110-degree sweep and a fully sealed aluminum housing. It's built for center consoles, walkarounds, and cuddy cabins that take real spray, and it drives a 22-inch Deluxe or 20-inch Premier arm and blade with room to spare.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Marinco 71012 is the 1.5 series waterproof wiper motor, a 12-volt two-speed unit built for boats that take real spray over the bow. If you run a center console, a walkaround, or a cuddy cabin and you're tired of squinting through a salt-crusted windshield, this is the motor that clears it. It drives a 110-degree sweep and carries 109 in-lbs of stall torque, which is plenty of muscle for a single blade on a mid-size windshield.\u003c\/p\u003e\n\u003cp\u003eWhat sets this one apart is how it's sealed. The base and housing are powder-coated aluminum, fully sealed against water intrusion, so wash-downs and driving rain don't get into the works. The drive nut is chrome-plated solid brass, knurled for grip, and the drive shaft runs brass and stainless steel. That matters out on the water. Cheaper wiper motors use pot metal that corrodes and seizes after a couple of seasons. This one is built to keep turning.\u003c\/p\u003e\n\u003cp\u003eWiring it in is straightforward. You get sealed 6-inch, 16 AWG leads and a 5-amp fuse with a holder right in the box. One thing to know up front: the operating switch is not included, so you'll want a marine rocker or 3-position switch to run it. We'd pair it with a Marinco switch for a clean match. Run the 5-amp fuse at the battery, and double-check your polarity before you power it up. Reverse polarity will cook the motor, and that's not a warranty claim you want to be making on a fresh install.\u003c\/p\u003e\n\u003cp\u003eSizing your arm and blade is the other thing to get right. The 71012 is spec'd to drive a 22-inch Deluxe arm and blade combination, or a 20-inch Premier arm and blade. The shaft measures 0.625 inches in diameter and 2.5 inches long, so it fits standard marine wiper hardware. Before you drill anything, measure the arc your blade will travel. That 110-degree sweep covers a wide field, but on some windshields the blade tip can catch the frame at the outer edges of the stroke. Measure first, mount second. It saves you a re-drill.\u003c\/p\u003e\n\u003cp\u003eThe motor self-parks, adjustable to either the right or the left, and it coasts to park so the blade settles cleanly instead of slamming to a stop. RF-shielded circuitry keeps it from throwing electrical noise into your VHF or stereo, which is a nice touch on a boat with a lot of electronics packed into the console. And you get two speeds off the same switch, a slow wipe for light mist and a faster one for a downpour, with no extra wiring to manage between them.\u003c\/p\u003e\n\u003cp\u003eOne maintenance note from the field: on boats that sit uncovered in strong sun, the shaft seal can dry out and start letting a little moisture past after a couple of years. It's an easy fix. A fresh O-ring or a dab of dielectric grease on the shaft seal at your annual service keeps it sealed for the long haul. Keep it under a cover when you can, and it'll last you even longer.\u003c\/p\u003e\n\u003cp\u003eWho's it for? Small to mid-size boats running a single-blade windshield. Walkarounds, cuddies, center consoles, hardtop skiffs. It's a workhorse for an 18 to 22-inch blade. If you're running oversized flybridge wipers or 24-inch-plus blades in heavy rain, this motor will labor, so step up to a heavier unit for that job. On outboard-powered boats that buzz with engine vibration, back the mount with a plate and a little thread locker so it doesn't work loose over a season. But for the boats it's built for, the 71012 is a buy-once part. Seal it up right, mount it solid, fuse it properly, and it'll clear your glass for years of hard running.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e12V two-speed motor with 109 in-lbs (12.3 Nm) stall torque for reliable single-blade wiping\u003c\/li\u003e\n  \u003cli\u003e110-degree sweep covers a wide field on mid-size windshields\u003c\/li\u003e\n  \u003cli\u003eFully sealed, powder-coated aluminum base and housing stands up to spray and wash-downs\u003c\/li\u003e\n  \u003cli\u003eChrome-plated solid brass knurled drive nut with brass and stainless steel drive shaft resists corrosion\u003c\/li\u003e\n  \u003cli\u003e0.625-inch diameter x 2.5-inch shaft fits standard marine wiper hardware\u003c\/li\u003e\n  \u003cli\u003eAdjustable right or left self-parking with coast-to-park for a clean blade rest\u003c\/li\u003e\n  \u003cli\u003eRF-shielded circuitry keeps electrical noise off your VHF and stereo\u003c\/li\u003e\n  \u003cli\u003eSealed 6-inch, 16 AWG wire leads for a weatherproof connection\u003c\/li\u003e\n  \u003cli\u003eIncludes a 5A fuse and holder (operating switch sold separately)\u003c\/li\u003e\n  \u003cli\u003eDrives a 22-inch Deluxe or 20-inch Premier arm and blade combination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Marinco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat voltage does the Marinco 71012 run on?\u003c\/summary\u003e\n    \u003cp\u003eIt's a 12-volt DC motor. It ships with a 5-amp fuse and holder, and you'll want that fuse installed right at the battery.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs an operating switch included?\u003c\/summary\u003e\n    \u003cp\u003eNo. The 71012 comes with the 5A fuse and holder, but the switch is separate. Use a marine rocker or 3-position switch to run it. A Marinco switch pairs cleanly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size arm and blade does it drive?\u003c\/summary\u003e\n    \u003cp\u003eIt's spec'd for a 22-inch Deluxe arm and blade combination, or a 20-inch Premier arm and blade. It handles an 18 to 22-inch blade comfortably.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the sweep angle?\u003c\/summary\u003e\n    \u003cp\u003e110 degrees. That covers a wide field on a single-blade windshield. Measure the blade's arc against your frame before mounting so the tip doesn't catch at the edges of the stroke.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it really waterproof?\u003c\/summary\u003e\n    \u003cp\u003eYes. The base and housing are powder-coated aluminum and fully sealed against water intrusion, so it handles spray, rain, and wash-downs. On boats stored in strong sun, refresh the shaft seal at annual service to keep it that way.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the shaft dimensions?\u003c\/summary\u003e\n    \u003cp\u003eThe shaft is 0.625 inches in diameter and 2.5 inches long, which fits standard marine wiper hardware.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the motor self-park?\u003c\/summary\u003e\n    \u003cp\u003eIt does. Self-parking is adjustable to the right or the left, and it coasts to park so the blade settles gently instead of slamming to a stop.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much torque does it have?\u003c\/summary\u003e\n    \u003cp\u003eStall torque is 109 in-lbs (12.3 Nm). That's plenty for a single blade up to 22 inches. Oversized flybridge blades of 24 inches or more will stall it in heavy rain.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it have more than one speed?\u003c\/summary\u003e\n    \u003cp\u003eYes, it's a two-speed motor. A slow wipe for light mist and a faster one for a downpour, both off the same switch.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I wire it in?\u003c\/summary\u003e\n    \u003cp\u003eIt has sealed 6-inch, 16 AWG leads. Run the included 5A fuse at the battery, connect your switch, and check polarity before powering up. Reverse polarity will destroy the motor.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eMarinco 71012 12V 1.5 Waterproof Wiper Motor with a 2.5in shaft and 110 degree Sweep\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMarinco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e71012\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e035028710129\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eStall Torque\u003c\/th\u003e\n\u003ctd\u003e109 in-lbs (125 kgf\/cm; 12.3 Nm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eStall Current\u003c\/th\u003e\n\u003ctd\u003e11.5 - 13.0A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eNo Load Current\u003c\/th\u003e\n\u003ctd\u003e0.5 - 1.2A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFuse\u003c\/th\u003e\n\u003ctd\u003e5A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShaft Diameter\u003c\/th\u003e\n\u003ctd\u003e0.625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShaft Length\u003c\/th\u003e\n\u003ctd\u003e2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSweep Angle\u003c\/th\u003e\n\u003ctd\u003e110 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMotor Speed\u003c\/th\u003e\n\u003ctd\u003eTwo speed\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWire Leads\u003c\/th\u003e\n\u003ctd\u003eSealed 6\" leads, 16 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSelf Parking\u003c\/th\u003e\n\u003ctd\u003eAdjustable right or left, coast to park\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eFully sealed powder-coated aluminum base and housing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDrive Nut\u003c\/th\u003e\n\u003ctd\u003eChrome-plated solid brass, knurled\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDrive Shaft\u003c\/th\u003e\n\u003ctd\u003eBrass and stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCircuitry\u003c\/th\u003e\n\u003ctd\u003eRF shielded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended Arm and Blade\u003c\/th\u003e\n\u003ctd\u003e22\" Deluxe or 20\" Premier arm and blade combination\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Dimensions (L x W x D)\u003c\/th\u003e\n\u003ctd\u003e7.75\" x 4\" x 2.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What voltage does the Marinco 71012 run on?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a 12-volt DC motor. It ships with a 5-amp fuse and holder, and you'll want that fuse installed right at the battery.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is an operating switch included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The 71012 comes with the 5A fuse and holder, but the switch is separate. Use a marine rocker or 3-position switch to run it. A Marinco switch pairs cleanly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size arm and blade does it drive?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's spec'd for a 22-inch Deluxe arm and blade combination, or a 20-inch Premier arm and blade. It handles an 18 to 22-inch blade comfortably.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the sweep angle?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"110 degrees. That covers a wide field on a single-blade windshield. Measure the blade's arc against your frame before mounting so the tip doesn't catch at the edges of the stroke.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it really waterproof?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The base and housing are powder-coated aluminum and fully sealed against water intrusion, so it handles spray, rain, and wash-downs. On boats stored in strong sun, refresh the shaft seal at annual service to keep it that way.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the shaft dimensions?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The shaft is 0.625 inches in diameter and 2.5 inches long, which fits standard marine wiper hardware.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the motor self-park?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It does. Self-parking is adjustable to the right or the left, and it coasts to park so the blade settles gently instead of slamming to a stop.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much torque does it have?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Stall torque is 109 in-lbs (12.3 Nm). That's plenty for a single blade up to 22 inches. Oversized flybridge blades of 24 inches or more will stall it in heavy rain.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it have more than one speed?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, it's a two-speed motor. A slow wipe for light mist and a faster one for a downpour, both off the same switch.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I wire it in?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It has sealed 6-inch, 16 AWG leads. Run the included 5A fuse at the battery, connect your switch, and check polarity before powering up. Reverse polarity will destroy the motor.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Marinco","offers":[{"title":"Default Title","offer_id":44785902682205,"sku":"1004581","price":241.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/MRN71012_001.jpg?v=1784939335","url":"https:\/\/nvnmarine.com\/products\/marinco-71012-12v-waterproof-wiper-motor","provider":"NVN Marine","version":"1.0","type":"link"}