{"product_id":"marinco-200bbi-bass-boat-power-inlet-20a-125v-front-mount","title":"Marinco 200BBI Bass Boat Power Inlet 20A 125V Front Mount","description":"\u003cp class=\"nvn-hero\"\u003eThe Marinco 200BBI.OEM is a front-mount AC power inlet built for bass boats. Wire it to your onboard charger and plug in shore power to top off your batteries, no open hatches or cords through a lid. Rated 20 amps at 125 volts, with a UV-resistant nylon housing and an included dust cover.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Marinco 200BBI.OEM is a front-mount power inlet built for bass boats and other small craft that carry an onboard battery charger. It gives you a clean, permanent place to plug in shore power so you can top off your trolling motor and cranking batteries overnight without running an extension cord through a hatch or over the gunwale. Rated at 20 amps and 125 volts AC, it handles the standard household-style shore connection most bass boats rely on.\u003c\/p\u003e\n\u003cp\u003eHere's the basic idea. Your boat's charger stays wired to the batteries. The 200BBI mounts through the hull or a console panel and connects to that charger on the inside. When you're back at the dock or in the driveway, you run a cord from a wall outlet to the inlet, and the charger does the rest. No lifting seats, no propping open compartments, no cord pinched in a lid all night. It's the difference between a tidy, marine-grade connection and a temporary rig you have to redo every trip.\u003c\/p\u003e\n\u003cp\u003eMarinco built this one to live outside. The housing is UV-resistant nylon, so it won't get chalky and brittle after a couple of seasons in the sun the way cheaper plastic does. The terminals use Marinco's Perma-Lock brass design for a solid, corrosion-resistant electrical connection, which matters a lot when you're dealing with salt air, spray, and the constant vibration of a boat on the trailer. A UV-resistant molded flexible vinyl cover seals over the face when the inlet isn't in use, and a dust cover is included to keep grit and moisture out of the contacts between trips.\u003c\/p\u003e\n\u003cp\u003eThe front-mount design keeps installation straightforward. You cut the mounting hole, drop the inlet in from the front of the panel, and secure it. The body measures 2.5 inches in diameter and sits 2.67 inches deep behind the panel, so check your clearance before you commit to a spot, especially in a tight console or a thin bulkhead where wiring and other gear compete for room. The black finish blends into most bass boat consoles and dark hull sides without drawing attention.\u003c\/p\u003e\n\u003cp\u003eBecause it carries UL and CSA approval, you know the 200BBI has been tested to recognized North American safety standards for this kind of AC connection. That's not a small thing on a boat. Shore power and water don't mix well, and a properly rated, properly installed inlet is your first line of defense against a bad connection. If you're wiring this into a boat, follow ABYC practices, use marine-grade wire on the charger side, and make sure your charger and breaker match the 20-amp, 125-volt rating.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Bass boat owners, mostly. Anyone running a two- or three-bank onboard charger who's tired of fishing an extension cord into a battery compartment. It's also a smart upgrade if your old inlet has gone yellow and cracked from UV exposure, or if you're rigging a new boat and want the charging connection done right from day one. The OEM designation means this is the same style of inlet boat builders spec from the factory, so it'll look and function like a factory-installed part.\u003c\/p\u003e\n\u003cp\u003eA couple of honest notes. This is the inlet only. It doesn't come with a shore power cord or the onboard charger, so you'll pair it with the cord and charger that fit your setup. And it's a 20-amp, 125-volt AC part, which covers the vast majority of bass boat charging needs but isn't meant for the high-draw 30-amp systems you'd find on larger cruisers. For a bass boat or small fishing rig, though, it's exactly the right size.\u003c\/p\u003e\n\u003cp\u003eLittle details make a part like this worth buying once. The flexible vinyl cover flips out of the way when you plug in and snaps back when you're done, so it's always there when you need it instead of dangling by a broken tab. The brass terminals take a familiar connection on the back, keeping the wiring simple for anyone who's rigged a boat before. And the whole assembly is compact enough to tuck into the corner of a console or a side panel where it stays out of the way of your feet and your gear.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e20 amp, 125 volt AC rating handles standard bass boat shore power charging\u003c\/li\u003e\n  \u003cli\u003eFront-mount design installs from the face of a console or hull panel for a clean look\u003c\/li\u003e\n  \u003cli\u003eUV-resistant nylon housing resists sun damage, chalking, and cracking season after season\u003c\/li\u003e\n  \u003cli\u003ePerma-Lock brass terminals give a solid, corrosion-resistant electrical connection\u003c\/li\u003e\n  \u003cli\u003eUV-resistant molded flexible vinyl cover seals the face when the inlet isn't in use\u003c\/li\u003e\n  \u003cli\u003eIncluded dust cover keeps grit and moisture out of the contacts between trips\u003c\/li\u003e\n  \u003cli\u003eUL and CSA approved to recognized North American safety standards\u003c\/li\u003e\n  \u003cli\u003eCompact 2.5 inch diameter by 2.67 inch depth fits tight consoles and side panels\u003c\/li\u003e\n  \u003cli\u003eBlack finish blends into most bass boat consoles and dark hull sides\u003c\/li\u003e\n  \u003cli\u003eOEM-style inlet matches factory-spec charging connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Marinco reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the Marinco 200BBI used for?\u003c\/summary\u003e\n    \u003cp\u003eIt's a front-mount AC power inlet for bass boats. You mount it through a console or hull panel and wire it to your onboard battery charger, then plug a shore power cord into it to charge your batteries without opening a compartment.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the amperage and voltage rating?\u003c\/summary\u003e\n    \u003cp\u003e20 amps at 125 volts AC. That covers the standard shore power connection most bass boats and small fishing boats use.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a shore power cord?\u003c\/summary\u003e\n    \u003cp\u003eNo. The 200BBI is the inlet only. You'll supply the shore power cord and the onboard charger that fit your boat.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs a dust cover included?\u003c\/summary\u003e\n    \u003cp\u003eYes. It ships with a dust cover, and it also has a UV-resistant molded flexible vinyl cover that seals the face when the inlet isn't in use.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow big is it and how deep does it sit?\u003c\/summary\u003e\n    \u003cp\u003eThe body is 2.5 inches in diameter and 2.67 inches deep. Check your clearance behind the mounting panel before you cut the hole, especially in a tight console.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it safe for outdoor marine use?\u003c\/summary\u003e\n    \u003cp\u003eIt's built for it. The housing and cover are UV-resistant, the terminals are corrosion-resistant Perma-Lock brass, and the unit carries UL and CSA approval.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the OEM designation mean?\u003c\/summary\u003e\n    \u003cp\u003eIt's the same style of inlet boat builders install at the factory, so it looks and functions like a factory-fitted part when you rig or repair a boat.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount?\u003c\/summary\u003e\n    \u003cp\u003eIt's a front-mount inlet. You cut the mounting hole, insert the inlet from the front of the panel, and secure it, then connect the charger wiring to the brass terminals on the back.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work for a 30-amp system?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's rated for 20 amps at 125 volts. For a bass boat or small fishing boat that's the right size, but it isn't meant for higher-draw 30-amp systems.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is it?\u003c\/summary\u003e\n    \u003cp\u003eBlack, which blends into most bass boat consoles and dark hull sides.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eMarinco 200BBI.OEM Bass Boat Power Inlet\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMarinco\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e200BBI.OEM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e093344309113\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e20 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e125 Volt AC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e2.5 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e2.67 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Material\u003c\/th\u003e\n\u003ctd\u003eUV Resistant Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminals\u003c\/th\u003e\n\u003ctd\u003ePerma-Lock Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCover Material\u003c\/th\u003e\n\u003ctd\u003eUV Resistant Molded Flexible Vinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCertification\u003c\/th\u003e\n\u003ctd\u003eUL \/ CSA Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDust Cover\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eFront Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eBass Boat Power Inlet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the Marinco 200BBI used for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a front-mount AC power inlet for bass boats. You mount it through a console or hull panel and wire it to your onboard battery charger, then plug a shore power cord into it to charge your batteries without opening a compartment.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the amperage and voltage rating?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"20 amps at 125 volts AC. That covers the standard shore power connection most bass boats and small fishing boats use.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a shore power cord?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The 200BBI is the inlet only. You'll supply the shore power cord and the onboard charger that fit your boat.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is a dust cover included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It ships with a dust cover, and it also has a UV-resistant molded flexible vinyl cover that seals the face when the inlet isn't in use.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How big is it and how deep does it sit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The body is 2.5 inches in diameter and 2.67 inches deep. Check your clearance behind the mounting panel before you cut the hole, especially in a tight console.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it safe for outdoor marine use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built for it. The housing and cover are UV-resistant, the terminals are corrosion-resistant Perma-Lock brass, and the unit carries UL and CSA approval.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the OEM designation mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the same style of inlet boat builders install at the factory, so it looks and functions like a factory-fitted part when you rig or repair a boat.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a front-mount inlet. You cut the mounting hole, insert the inlet from the front of the panel, and secure it, then connect the charger wiring to the brass terminals on the back.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work for a 30-amp system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's rated for 20 amps at 125 volts. For a bass boat or small fishing boat that's the right size, but it isn't meant for higher-draw 30-amp systems.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Black, which blends into most bass boat consoles and dark hull sides.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Marinco","offers":[{"title":"Default Title","offer_id":45081451987037,"sku":"2010161","price":18.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_bd2afc44-856c-4828-93fa-c5264bc5499a.jpg?v=1790010858","url":"https:\/\/nvnmarine.com\/products\/marinco-200bbi-bass-boat-power-inlet-20a-125v-front-mount","provider":"NVN Marine","version":"1.0","type":"link"}