{"product_id":"lumishore-lux-light-control-module-crgbw","title":"Lumishore LUX Light Control Module","description":"\u003cp class=\"nvn-hero\"\u003eThe Lumishore LUX Light Control Module is the required brain of any LUX lighting setup. It drives up to 16 LUX downlights or courtesy lights with full-spectrum CRGBW color and tunable white from 2700K to 6500K, all controlled by simple momentary switches. IP68-rated with a full protection suite, it runs on 12 or 24 volt systems.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Lumishore LUX Light Control Module is the brain behind a LUX lighting setup. It's the piece that takes 12 or 24 volt DC power and turns it into full-spectrum CRGBW output across every light you've wired into the system. If you're running LUX downlights, courtesy lights, livewell lights, flood lights, or light bars, this module is required. Nothing in the LUX line comes alive without it.\u003c\/p\u003e\n\u003cp\u003eWhat makes it worth the money is the color control. You get full-spectrum RGB plus tunable white from 2700K all the way to 6500K. That means a warm, relaxed glow at the dock in the evening and a crisp, cool white when you're cleaning fish or rigging lines after dark. One module, one set of lights, and you're covering both ends of that range without swapping bulbs or fixtures.\u003c\/p\u003e\n\u003cp\u003eA single module drives up to 16 LUX downlights or courtesy lights. You control everything with momentary switches at the helm, so it works as a standalone system right out of the gate. No app required to get lights on the water. Want more, scenes, dimming presets, zone control? Wire it in alongside the EOS-LUX Command Center and the rest of the Lumishore LUX or EOS family, and the module becomes part of a full boat-wide lighting setup.\u003c\/p\u003e\n\u003cp\u003eIt helps to understand where this module sits. It carries the multi-channel driver electronics for the system, reads your switch inputs, manages each color channel, and feeds clean, regulated output down the line to every fixture. That's why one control module can run a whole set of lights in sync, and why the color stays consistent from the first light to the last. It's the difference between lights that just turn on and a lighting system that behaves like one.\u003c\/p\u003e\n\u003cp\u003eLumishore didn't skimp on the electronics protection, and that matters on a boat. The module carries an IP68 ingress rating, so it shrugs off the damp, humid spots where you'd actually mount it. Surge protection, reverse polarity protection, in-rush current protection, low voltage protection, and power line noise suppression are all built in. There's a soft-start circuit to protect the electronics on power-up, and ATRB, Automatic Thermal Roll Back, quietly dials things down if the module ever runs hot instead of just shutting off on you. It's also ISO 8846 ignition protected, which is the standard that matters when you're mounting electrical gear near fuel systems.\u003c\/p\u003e\n\u003cp\u003ePower-wise it's easy to live with. The supply range runs from 10.5 to 31 volts DC, so it's happy on both 12V and 24V systems. Current draw is tiny, 0.2 amps at 12V and 0.1 amps at 24V, which means the module itself is barely a load on your house bank. A multi-channel internal driver with intelligent power management handles the actual light output, so each channel gets what it needs.\u003c\/p\u003e\n\u003cp\u003eInstallation is meant to be straightforward, but a few things are worth getting right. Give it a dedicated, properly fused circuit rather than sharing a crowded lighting breaker. Mount it somewhere dry and cool, a console or a dry section of the bilge is ideal, and keep it away from direct engine-compartment heat so the thermal roll-back never has a reason to kick in. And take your time with the data wiring on daisy-chained lights, getting those runs right the first time saves a lot of headaches.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anybody building or expanding a Lumishore LUX lighting system, from a center console running a handful of underwater and courtesy lights to a larger boat with a bigger array. Just know it's a Lumishore LUX and EOS system component, so it drives that family of lights, not generic LED strips. If you've already committed to the LUX ecosystem, this is the part that ties it all together and makes the color, the dimming, and the control actually work.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eFull-spectrum CRGBW color with tunable white from 2700K to 6500K, so you can go from a warm dockside glow to a crisp work-light white\u003c\/li\u003e\n  \u003cli\u003eDrives up to 16 LUX downlights or courtesy lights from a single module, controlled with momentary switches at the helm\u003c\/li\u003e\n  \u003cli\u003e10.5 to 31V DC supply range works on both 12V and 24V boat systems\u003c\/li\u003e\n  \u003cli\u003eLow current draw of 0.2A at 12V (0.1A at 24V), so it's barely a load on your house bank\u003c\/li\u003e\n  \u003cli\u003eIP68 ingress rating stands up to the damp, humid spots where you'd mount it\u003c\/li\u003e\n  \u003cli\u003eATRB Automatic Thermal Roll Back protects the electronics by easing output down instead of shutting off if it runs hot\u003c\/li\u003e\n  \u003cli\u003eFull protection suite: surge, reverse polarity, in-rush current, low voltage, soft-start, and power line noise suppression\u003c\/li\u003e\n  \u003cli\u003eISO 8846 ignition protected for safe mounting near fuel systems\u003c\/li\u003e\n  \u003cli\u003eMulti-channel internal driver with intelligent power management feeds clean output to every channel\u003c\/li\u003e\n  \u003cli\u003eWorks with the EOS-LUX Command Center and the rest of the Lumishore LUX and EOS family for scenes and expanded control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Lumishore reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the LUX Light Control Module actually do?\u003c\/summary\u003e\n    \u003cp\u003eIt's the brain of a Lumishore LUX lighting setup. It carries the multi-channel driver electronics, reads your switch inputs, and feeds regulated full-spectrum CRGBW output to your LUX lights. Every LUX downlight, courtesy light, livewell light, flood light, and light bar needs it to run.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many lights can one module control?\u003c\/summary\u003e\n    \u003cp\u003eA single module drives up to 16 LUX downlights or courtesy lights. Larger arrays typically add a second module to share the load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it work on both 12V and 24V boats?\u003c\/summary\u003e\n    \u003cp\u003eYes. The supply range runs from 10.5 to 31 volts DC, so it's happy on 12V and 24V systems alike. Current draw is just 0.2 amps at 12V and 0.1 amps at 24V.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat colors can it produce?\u003c\/summary\u003e\n    \u003cp\u003eFull-spectrum RGB plus tunable white from 2700K to 6500K. That covers everything from a warm evening glow at the dock to a cool, crisp white for working on deck after dark.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need an app or a display to use it?\u003c\/summary\u003e\n    \u003cp\u003eNo. The module works as a standalone system with momentary switches at the helm. If you want scenes, presets, and expanded control, you can add the EOS-LUX Command Center and the rest of the Lumishore LUX or EOS lineup.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it run third-party LED lights?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's built for the Lumishore LUX and EOS lighting family and drives those fixtures, not generic LED strips.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhere should I mount it?\u003c\/summary\u003e\n    \u003cp\u003eSomewhere dry and cool, like a console or a dry section of the bilge. Keep it away from direct engine-compartment heat so the thermal roll-back protection never has a reason to kick in. It carries an IP68 rating, but a dry, ventilated spot is still best.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it need its own circuit?\u003c\/summary\u003e\n    \u003cp\u003eGive it a dedicated, properly fused circuit rather than sharing a crowded lighting breaker. That keeps startup surges from tripping other loads and gives the module clean, stable power.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it protected against wiring mistakes and power spikes?\u003c\/summary\u003e\n    \u003cp\u003eIt's loaded with protection: reverse polarity, surge, in-rush current, low voltage, soft-start, and power line noise suppression are all built in, along with ISO 8846 ignition protection. Still, take care to get the data wiring right on daisy-chained lights.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the ingress protection rating?\u003c\/summary\u003e\n    \u003cp\u003eIP68, which means it's sealed against dust and rated for the wet, humid conditions found on a boat.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eLumishore LUX Light Control Module\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eLumishore\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e010-04442-00\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e847772002548\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor Output\u003c\/th\u003e\n\u003ctd\u003eFull-Spectrum RGB and White (CRGBW)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor Temperature Range\u003c\/th\u003e\n\u003ctd\u003e2700K to 6500K (Tunable White)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIngress Protection Rating\u003c\/th\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDriver\u003c\/th\u003e\n\u003ctd\u003eMulti-Channel Internal Driver\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupply Voltage Range\u003c\/th\u003e\n\u003ctd\u003e10.5 - 31 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMax Current Draw (12\/24V DC)\u003c\/th\u003e\n\u003ctd\u003e0.2 A \/ 0.1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSurge Protection\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eATRB (Automatic Thermal Roll Back)\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLow Voltage Protection\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAuto Power Control\u003c\/th\u003e\n\u003ctd\u003eIntelligent Multi-Channel Power Management\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSoft Start Electronics Protection\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReverse Polarity Protection\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIn Rush Current Protection\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower Line Noise Suppression\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eISO 8846 (Ignition Protection)\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eLighting\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the LUX Light Control Module actually do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the brain of a Lumishore LUX lighting setup. It carries the multi-channel driver electronics, reads your switch inputs, and feeds regulated full-spectrum CRGBW output to your LUX lights. Every LUX downlight, courtesy light, livewell light, flood light, and light bar needs it to run.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many lights can one module control?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A single module drives up to 16 LUX downlights or courtesy lights. Larger arrays typically add a second module to share the load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it work on both 12V and 24V boats?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The supply range runs from 10.5 to 31 volts DC, so it's happy on 12V and 24V systems alike. Current draw is just 0.2 amps at 12V and 0.1 amps at 24V.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What colors can it produce?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Full-spectrum RGB plus tunable white from 2700K to 6500K. That covers everything from a warm evening glow at the dock to a cool, crisp white for working on deck after dark.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need an app or a display to use it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The module works as a standalone system with momentary switches at the helm. If you want scenes, presets, and expanded control, you can add the EOS-LUX Command Center and the rest of the Lumishore LUX or EOS lineup.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it run third-party LED lights?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's built for the Lumishore LUX and EOS lighting family and drives those fixtures, not generic LED strips.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Where should I mount it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Somewhere dry and cool, like a console or a dry section of the bilge. Keep it away from direct engine-compartment heat so the thermal roll-back protection never has a reason to kick in. It carries an IP68 rating, but a dry, ventilated spot is still best.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it need its own circuit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Give it a dedicated, properly fused circuit rather than sharing a crowded lighting breaker. That keeps startup surges from tripping other loads and gives the module clean, stable power.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it protected against wiring mistakes and power spikes?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's loaded with protection: reverse polarity, surge, in-rush current, low voltage, soft-start, and power line noise suppression are all built in, along with ISO 8846 ignition protection. Still, take care to get the data wiring right on daisy-chained lights.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the ingress protection rating?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"IP68, which means it's sealed against dust and rated for the wet, humid conditions found on a boat.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":44785917427805,"sku":"1004587","price":191.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/LMS0100444200.jpg?v=1784940032","url":"https:\/\/nvnmarine.com\/products\/lumishore-lux-light-control-module-crgbw","provider":"NVN Marine","version":"1.0","type":"link"}