{"product_id":"lumishore-eclipse-sl100-1m-white-led-strip-light","title":"Lumishore Eclipse SL100 1m White LED Strip Light","description":"\u003cp class=\"nvn-hero\"\u003eThe Lumishore Eclipse SL100 is a 1-meter white marine LED strip light that adds crisp, hidden accent lighting to any boat. Running a clean 5000K white with 60 LEDs per meter, it's fully potted and rated IP68. Cut it to length, seal the end, and light gunwales, steps, and cabins with a simple two-wire connection.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Lumishore Eclipse SL100 1m White Strip Light is the easy way to add clean, functional light to a boat without a bulky fixture in sight. Tuck it along a gunwale, under the helm, behind a ceiling panel, or beneath cabin furniture, and you get a crisp white glow with the source hidden from view. It's decorative when you want mood and genuinely useful when you need to see a step or a locker in the dark.\u003c\/p\u003e\n\u003cp\u003eThis version runs a clean 5000K white, which reads as a bright, neutral daylight tone rather than a warm yellow. That color temperature is a favorite for work areas and walkways because it renders surfaces honestly and makes it easy to find gear or read a label at night. With 60 white LEDs packed into every meter, the light is even and continuous, so you won't see hot spots or dark gaps down the length of the strip.\u003c\/p\u003e\n\u003cp\u003eLumishore builds the Eclipse range for salt water, and the construction reflects that. The strip is fully encapsulated and potted, sealing the LEDs and wiring inside a flexible waterproof body. That earns it an IP68 ingress protection rating, so spray, deck wash-downs, and short submersion aren't a problem. The strip measures a slim 10.8mm by 5.2mm in cross section, so it slides into tight channels and recesses where a rigid light bar simply wouldn't fit.\u003c\/p\u003e\n\u003cp\u003eInstallation stays simple. The Eclipse SL100 is plug and play with a two-wire electrical connection, so you don't need a marine electrician to get it lit. It's cut-to-length as well, which is the feature boaters love. If your run is shorter than a full meter, trim the strip at the marked cut point and seal the cut end before installation. Do that properly and the IP68 rating carries through to your exact custom length. That's what makes it so adaptable across different boats and mounting spots.\u003c\/p\u003e\n\u003cp\u003ePower draw is light. The strip pulls about 0.5A per meter, roughly 6 watts per meter, so you can run several sections without stressing the house battery on a long evening at the dock or on the hook. It works from a 12V DC supply and handles the usual 10 to 15 volt range as batteries charge and discharge, so the light stays steady whether you're plugged into shore power or running off the bank.\u003c\/p\u003e\n\u003cp\u003eYou've got options for control too. Wire it to a basic on\/off switch for instant white light, or connect it to the Eclipse Command Center to bring it into a larger Lumishore lighting setup with more integrated control across the boat. The strip itself doesn't ask for anything special once it's mounted and wired.\u003c\/p\u003e\n\u003cp\u003eWhite accent lighting earns its keep in the practical spots. Think steps, swim platforms, storage lockers, galley counters, and helm surrounds where you actually need to see what you're doing. It also gives a cabin a clean, modern look at night without the glare of an overhead dome light. Because the strip is fully potted and cut-to-length, it shrugs off the vibration, moisture, and flex that come with life on the water far better than generic strip lighting.\u003c\/p\u003e\n\u003cp\u003eLumishore backs the Eclipse SL100 with a 3-year warranty, so you're covered well past the first season. If you're refreshing your onboard lighting and you want a crisp, hidden white glow that installs in an afternoon, this 1-meter Eclipse strip is a smart, low-fuss choice. Grab a couple and light the whole cockpit the way you want it.\u003c\/p\u003e\n\u003cp\u003eLittle details make the Eclipse SL100 easy to live with. The flexible potted body follows gentle curves, so it hugs a rounded gunwale or the underside of a coaming without fighting you during the install. Because the whole strip is sealed, there are no exposed solder points to corrode over a season of salt air, which is where cheaper lighting tends to fail first. Run it with tinned marine wire and a properly rated switch, and you've got a clean white accent light that should keep working season after season without fuss.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eCrisp 5000K white accent lighting that stays hidden in gunwales, steps, and cabins\u003c\/li\u003e\n  \u003cli\u003e60 white LEDs per meter for smooth, even light with no dark gaps\u003c\/li\u003e\n  \u003cli\u003eFully encapsulated and potted, rated IP68 against spray, wash-downs, and submersion\u003c\/li\u003e\n  \u003cli\u003eSlim 10.8mm by 5.2mm cross section fits tight channels and recesses\u003c\/li\u003e\n  \u003cli\u003eCut-to-length design, trim to fit then seal the cut end before installation\u003c\/li\u003e\n  \u003cli\u003ePlug and play with a simple two-wire electrical connection\u003c\/li\u003e\n  \u003cli\u003eLow 0.5A per meter draw, about 6 watts per meter, easy on the house battery\u003c\/li\u003e\n  \u003cli\u003eRuns on 12V DC and tolerates the normal 10 to 15 volt range\u003c\/li\u003e\n  \u003cli\u003eControl with a basic on\/off switch or the Eclipse Command Center\u003c\/li\u003e\n  \u003cli\u003eBacked by a 3-year Lumishore warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Lumishore reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is this Eclipse SL100 strip?\u003c\/summary\u003e\n    \u003cp\u003eThis model is single-color white at a clean 5000K daylight tone. It uses 60 white LEDs per meter. Lumishore also offers blue and dual blue-and-white versions if you prefer a different look.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does 5000K white look like?\u003c\/summary\u003e\n    \u003cp\u003e5000K is a bright, neutral daylight white rather than a warm yellow. It renders surfaces honestly, which makes it great for work areas, galley counters, steps, and anywhere you need to see clearly at night.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I cut the strip to fit a shorter run?\u003c\/summary\u003e\n    \u003cp\u003eYes. The Eclipse SL100 is cut-to-length. Trim it at the marked cut point to fit your space, then seal the cut end before you install it so the waterproofing stays intact.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow waterproof is it?\u003c\/summary\u003e\n    \u003cp\u003eIt carries an IP68 ingress protection rating and the whole strip is fully encapsulated and potted. That handles spray, deck wash-downs, and short submersion. Just seal any cut end properly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow slim is the strip?\u003c\/summary\u003e\n    \u003cp\u003eThe cross section is about 10.8mm by 5.2mm, so it slides into tight channels and recesses where a rigid light bar wouldn't fit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat voltage and power does it need?\u003c\/summary\u003e\n    \u003cp\u003eIt runs on a 12V DC supply and tolerates the normal 10 to 15 volt range. Draw is low at about 0.5A per meter, roughly 6 watts per meter, so it's easy on the house battery.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I control it?\u003c\/summary\u003e\n    \u003cp\u003eWire it to a simple on\/off switch for instant white light, or connect it to the Eclipse Command Center to fold it into a wider Lumishore lighting system.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it hard to install?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's plug and play with a two-wire electrical connection, so most boaters can handle it. Cut to length if needed, seal the end, mount it, and wire it up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long is this strip and can I connect more?\u003c\/summary\u003e\n    \u003cp\u003eThis is the 1-meter length. Lumishore offers the Eclipse SL100 in longer sizes too, and you can run several strips around the boat for full accent coverage.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat warranty does it come with?\u003c\/summary\u003e\n    \u003cp\u003eLumishore backs the Eclipse SL100 with a 3-year warranty, so you're covered well beyond the first season on the water.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eLumishore Eclipse SL100 1m White LED Strip Light\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eLumishore\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e010-04480-00\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e847772003378\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMarine LED Accent Strip Light\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite (5000K)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Density\u003c\/th\u003e\n\u003ctd\u003e60 white LEDs per meter\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCross Section\u003c\/th\u003e\n\u003ctd\u003e10.8mm x 5.2mm (0.425 in x 0.204 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1 meter\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupply Voltage\u003c\/th\u003e\n\u003ctd\u003e12V DC (10 to 15V DC range)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMax Current Draw\u003c\/th\u003e\n\u003ctd\u003e0.5A per meter (6W per meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIngress Protection\u003c\/th\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eControl Options\u003c\/th\u003e\n\u003ctd\u003eOn\/off switch or Eclipse Command Center\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMechanical Installation\u003c\/th\u003e\n\u003ctd\u003eCut to length and seal the cut end before installation, plug and play\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eElectrical Installation\u003c\/th\u003e\n\u003ctd\u003eSimple two-wire connection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is this Eclipse SL100 strip?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This model is single-color white at a clean 5000K daylight tone. It uses 60 white LEDs per meter. Lumishore also offers blue and dual blue-and-white versions if you prefer a different look.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does 5000K white look like?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"5000K is a bright, neutral daylight white rather than a warm yellow. It renders surfaces honestly, which makes it great for work areas, galley counters, steps, and anywhere you need to see clearly at night.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I cut the strip to fit a shorter run?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The Eclipse SL100 is cut-to-length. Trim it at the marked cut point to fit your space, then seal the cut end before you install it so the waterproofing stays intact.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How waterproof is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It carries an IP68 ingress protection rating and the whole strip is fully encapsulated and potted. That handles spray, deck wash-downs, and short submersion. Just seal any cut end properly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How slim is the strip?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The cross section is about 10.8mm by 5.2mm, so it slides into tight channels and recesses where a rigid light bar wouldn't fit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What voltage and power does it need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It runs on a 12V DC supply and tolerates the normal 10 to 15 volt range. Draw is low at about 0.5A per meter, roughly 6 watts per meter, so it's easy on the house battery.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I control it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Wire it to a simple on\/off switch for instant white light, or connect it to the Eclipse Command Center to fold it into a wider Lumishore lighting system.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it hard to install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's plug and play with a two-wire electrical connection, so most boaters can handle it. Cut to length if needed, seal the end, mount it, and wire it up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long is this strip and can I connect more?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This is the 1-meter length. Lumishore offers the Eclipse SL100 in longer sizes too, and you can run several strips around the boat for full accent coverage.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What warranty does it come with?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Lumishore backs the Eclipse SL100 with a 3-year warranty, so you're covered well beyond the first season on the water.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":44784489955421,"sku":"1004535","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/LMS0100448000.jpg?v=1784896413","url":"https:\/\/nvnmarine.com\/products\/lumishore-eclipse-sl100-1m-white-led-strip-light","provider":"NVN Marine","version":"1.0","type":"link"}