{"product_id":"lumishore-eclipse-sl100-1m-blue-white-led-strip","title":"Lumishore Eclipse SL100 1m Blue \u0026 White LED Strip Light","description":"\u003cp class=\"nvn-hero\"\u003eThe Lumishore Eclipse SL100 dual-color strip gives you two lights in one 1-meter run. Choose soft blue for night mood or crisp 5000K white for task light, with 60 LEDs of each per meter. Fully potted and rated IP68, it cuts to length and installs with a simple wire connection.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Lumishore Eclipse SL100 1m Blue and White Strip Light is the versatile one in the lineup. Instead of committing to a single look, this dual-color strip carries both blue and white LEDs in a single 1-meter run, so you can switch between a soft blue mood at anchor and a crisp white work light when you actually need to see. Tuck it into a gunwale, under the helm, behind a ceiling panel, or beneath cabin furniture, and the source stays hidden while the light does the job.\u003c\/p\u003e\n\u003cp\u003eTwo colors in one strip is genuinely useful on a boat. The blue side gives you that easy, low-glare accent glow that's kind to your night vision, perfect for cruising home in the dark or setting the mood in the cockpit. The white side runs a clean 5000K daylight tone that renders surfaces honestly, which is what you want over a galley counter, along a step, or inside a locker when you're hunting for gear. You get 60 blue LEDs per meter and 60 white LEDs per meter, so both colors light evenly with no hot spots or dark gaps down the run.\u003c\/p\u003e\n\u003cp\u003eLumishore builds the Eclipse range for the marine world, and the construction backs that up. The strip is fully encapsulated and potted, sealing the LEDs and wiring inside a flexible waterproof body. That earns an IP68 ingress protection rating, so spray, deck wash-downs, and short submersion won't hurt it. The cross section is a slim 10.8mm by 4.0mm, so it fits into tight channels and recesses where a rigid light bar has no chance.\u003c\/p\u003e\n\u003cp\u003eInstallation is refreshingly simple. The Eclipse SL100 is plug and play with a two-wire electrical connection, so most boaters can wire it up without calling a pro. It's also cut-to-length, which is the feature that makes it so adaptable. If your run comes up shorter than a full meter, trim the strip at the marked cut point and seal the cut end before installation. Seal it properly and the IP68 protection carries right through to your exact length.\u003c\/p\u003e\n\u003cp\u003ePower draw stays modest at about 0.5A per meter, roughly 6 watts per meter, so you can add several runs without worrying about flattening the house battery on a long night away from shore power. The strip works from a 12V DC supply and tolerates the normal 10 to 15 volt range as batteries charge and discharge, so the light stays steady whether you're plugged in or running off the bank.\u003c\/p\u003e\n\u003cp\u003eControl is flexible. Wire it to on\/off switching to select your color and turn it on, or connect it to the Eclipse Command Center to bring the strip into a wider Lumishore lighting setup with more integrated control across the whole boat. However you run it, the strip itself is set-and-forget once it's mounted.\u003c\/p\u003e\n\u003cp\u003eThis dual-color layout is a smart pick when you can't decide between mood and function, because you don't have to. On an evening at the dock you might run blue for atmosphere, then flip to white when you're loading coolers or tidying the cockpit. One strip, two jobs, and no second fixture cluttering the space. Because it's fully potted and cut-to-length, it handles the vibration, moisture, and flex of a working boat far better than generic strip lighting.\u003c\/p\u003e\n\u003cp\u003eLumishore backs the Eclipse SL100 with a 3-year warranty, so you're covered well past the first season. If you want the flexibility of both colors from a single hidden strip, this 1-meter blue and white Eclipse is the one to reach for. It's an easy afternoon install that pays off every time the sun goes down.\u003c\/p\u003e\n\u003cp\u003eLittle details make it easy to live with. The flexible potted body follows gentle curves, so it hugs a rounded gunwale or the underside of a coaming without fighting you during the install. Because the whole strip is sealed, there are no exposed solder points to corrode in salt air. Run it with tinned marine wire and a properly rated switch, and you've got a two-in-one accent light that should keep working season after season.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eDual-color strip with both blue and white LEDs in one 1-meter run\u003c\/li\u003e\n  \u003cli\u003e60 blue LEDs per meter for soft mood light, 60 white LEDs per meter at 5000K for task light\u003c\/li\u003e\n  \u003cli\u003eSwitch between low-glare blue accent and crisp white work light\u003c\/li\u003e\n  \u003cli\u003eFully encapsulated and potted, rated IP68 against spray, wash-downs, and submersion\u003c\/li\u003e\n  \u003cli\u003eSlim 10.8mm by 4.0mm cross section fits tight channels and recesses\u003c\/li\u003e\n  \u003cli\u003eCut-to-length design, trim to fit then seal the cut end before installation\u003c\/li\u003e\n  \u003cli\u003ePlug and play with a simple two-wire electrical connection\u003c\/li\u003e\n  \u003cli\u003eLow 0.5A per meter draw, about 6 watts per meter, easy on the house battery\u003c\/li\u003e\n  \u003cli\u003eControl with on\/off switching or the Eclipse Command Center\u003c\/li\u003e\n  \u003cli\u003eBacked by a 3-year Lumishore warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Lumishore reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat colors does this strip have?\u003c\/summary\u003e\n    \u003cp\u003eThis is the dual-color model. It carries 60 blue LEDs per meter and 60 white LEDs per meter in a single strip, so you can run soft blue for mood or crisp 5000K white for task light.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use both colors at once?\u003c\/summary\u003e\n    \u003cp\u003eThe strip gives you blue and white in one run so you can select the color you want. Blue is great for low-glare night atmosphere, and the 5000K white is better when you need to see clearly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I cut the strip to fit a shorter run?\u003c\/summary\u003e\n    \u003cp\u003eYes. The Eclipse SL100 is cut-to-length. Trim it at the marked cut point to fit your space, then seal the cut end before you install it so the waterproofing stays intact.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow waterproof is it?\u003c\/summary\u003e\n    \u003cp\u003eIt carries an IP68 ingress protection rating and the whole strip is fully encapsulated and potted. That handles spray, deck wash-downs, and short submersion. Just seal any cut end properly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow slim is the strip?\u003c\/summary\u003e\n    \u003cp\u003eThe cross section is about 10.8mm by 4.0mm, so it slides into tight channels and recesses where a rigid light bar wouldn't fit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat voltage and power does it need?\u003c\/summary\u003e\n    \u003cp\u003eIt runs on a 12V DC supply and tolerates the normal 10 to 15 volt range. Draw is low at about 0.5A per meter, roughly 6 watts per meter, so it's easy on the house battery.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I control it?\u003c\/summary\u003e\n    \u003cp\u003eWire it to on\/off switching to select your color, or connect it to the Eclipse Command Center to fold it into a wider Lumishore lighting system with more integrated control.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it hard to install?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's plug and play with a two-wire electrical connection, so most boaters can handle it. Cut to length if needed, seal the end, mount it, and wire it up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long is this strip and can I connect more?\u003c\/summary\u003e\n    \u003cp\u003eThis is the 1-meter length. Lumishore offers the Eclipse SL100 in longer sizes too, and you can run several strips around the boat for full accent coverage.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat warranty does it come with?\u003c\/summary\u003e\n    \u003cp\u003eLumishore backs the Eclipse SL100 with a 3-year warranty, so you're covered well beyond the first season on the water.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eLumishore Eclipse SL100 1m Blue \u0026amp; White LED Strip Light\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eLumishore\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e010-04483-00\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e847772003408\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMarine LED Accent Strip Light\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColors\u003c\/th\u003e\n\u003ctd\u003eBlue and White (5000K)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Density\u003c\/th\u003e\n\u003ctd\u003e60 blue LEDs per meter, 60 white LEDs per meter\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCross Section\u003c\/th\u003e\n\u003ctd\u003e10.8mm x 4.0mm (0.425 in x 0.157 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1 meter\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupply Voltage\u003c\/th\u003e\n\u003ctd\u003e12V DC (10 to 15V DC range)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMax Current Draw\u003c\/th\u003e\n\u003ctd\u003e0.5A per meter (6W per meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIngress Protection\u003c\/th\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eControl Options\u003c\/th\u003e\n\u003ctd\u003eOn\/off switch or Eclipse Command Center\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMechanical Installation\u003c\/th\u003e\n\u003ctd\u003eCut to length and seal the cut end before installation, plug and play\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eElectrical Installation\u003c\/th\u003e\n\u003ctd\u003eSimple two-wire connection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eFully encapsulated and potted\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What colors does this strip have?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This is the dual-color model. It carries 60 blue LEDs per meter and 60 white LEDs per meter in a single strip, so you can run soft blue for mood or crisp 5000K white for task light.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use both colors at once?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The strip gives you blue and white in one run so you can select the color you want. Blue is great for low-glare night atmosphere, and the 5000K white is better when you need to see clearly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I cut the strip to fit a shorter run?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The Eclipse SL100 is cut-to-length. Trim it at the marked cut point to fit your space, then seal the cut end before you install it so the waterproofing stays intact.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How waterproof is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It carries an IP68 ingress protection rating and the whole strip is fully encapsulated and potted. That handles spray, deck wash-downs, and short submersion. Just seal any cut end properly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How slim is the strip?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The cross section is about 10.8mm by 4.0mm, so it slides into tight channels and recesses where a rigid light bar wouldn't fit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What voltage and power does it need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It runs on a 12V DC supply and tolerates the normal 10 to 15 volt range. Draw is low at about 0.5A per meter, roughly 6 watts per meter, so it's easy on the house battery.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I control it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Wire it to on\/off switching to select your color, or connect it to the Eclipse Command Center to fold it into a wider Lumishore lighting system with more integrated control.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it hard to install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's plug and play with a two-wire electrical connection, so most boaters can handle it. Cut to length if needed, seal the end, mount it, and wire it up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long is this strip and can I connect more?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This is the 1-meter length. Lumishore offers the Eclipse SL100 in longer sizes too, and you can run several strips around the boat for full accent coverage.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What warranty does it come with?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Lumishore backs the Eclipse SL100 with a 3-year warranty, so you're covered well beyond the first season on the water.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":44784490545245,"sku":"1004536","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/LMS0100448300.jpg?v=1784896504","url":"https:\/\/nvnmarine.com\/products\/lumishore-eclipse-sl100-1m-blue-white-led-strip","provider":"NVN Marine","version":"1.0","type":"link"}