{"product_id":"lumishore-eclipse-sl100-1m-blue-led-strip-light","title":"Lumishore Eclipse SL100 1m Blue LED Strip Light","description":"\u003cp class=\"nvn-hero\"\u003eThe Lumishore Eclipse SL100 is a 1-meter blue marine LED strip light that adds soft, hidden accent lighting to any boat. Fully potted and rated IP68, it packs 60 blue LEDs per meter and installs with a simple two-wire connection. Cut it to length, seal the end, and enjoy years of clean blue glow.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Lumishore Eclipse SL100 1m Blue Strip Light is one of those small upgrades that changes how your boat feels after dark. Instead of a harsh overhead glare, you get a soft wash of blue light tucked out of sight. Run it along a gunwale, under a helm dash, behind a ceiling panel, or beneath cabin furniture, and the source stays hidden while the glow does all the work. It's the kind of lighting that makes a cockpit feel finished rather than lit up like a parking lot.\u003c\/p\u003e\n\u003cp\u003eLumishore builds the Eclipse range for the marine environment first, and it shows. This strip carries 60 blue LEDs per meter, so the light is even and continuous with no obvious hot spots or dark gaps between diodes. The whole assembly is fully encapsulated and potted, which means the LEDs and circuitry are sealed inside a flexible waterproof body. That construction earns it an IP68 ingress protection rating, so spray, wash-downs, and the occasional dunk won't kill it. On an open boat where salt water gets everywhere, that matters.\u003c\/p\u003e\n\u003cp\u003eInstallation is refreshingly simple. The Eclipse SL100 is a plug and play strip with a straightforward two-wire electrical connection, so you don't need to be a marine electrician to get it running. It's also cut-to-length, which is what makes it so flexible in real installs. If your gunwale run is shorter than a full meter, you trim the strip at the marked cut point and seal the cut end before you install it. Seal it properly and the IP68 protection carries right through to your custom length. That flexibility is why boaters reach for these strips when a rigid fixture just won't fit the space.\u003c\/p\u003e\n\u003cp\u003ePower draw is modest, which is exactly what you want on a boat where every amp-hour counts. The strip pulls about 0.5A per meter, roughly 6 watts per meter, so you can add several runs without worrying about flattening the house battery on a quiet evening at anchor. It runs on a 12V DC supply and tolerates the normal 10 to 15 volt range you'll see as batteries charge and discharge, so it stays stable whether you're on shore power or running off the bank.\u003c\/p\u003e\n\u003cp\u003eControl is up to you. Wire it to a simple on\/off switch and you've got instant blue accent lighting whenever you flip it. Step up to the Eclipse Command Center and you fold the strip into a wider Lumishore lighting setup for more integrated control across the boat. Either way, the strip itself doesn't ask much of you once it's mounted.\u003c\/p\u003e\n\u003cp\u003eWhy blue? Blue accent light is easy on the eyes at night and helps preserve your natural night vision better than bright white does. That makes it a favorite for helm surrounds, steps, and cockpit edges where you want to see the boat without blinding yourself or your crew. It also just looks great reflecting off the water on a calm night in the slip.\u003c\/p\u003e\n\u003cp\u003eBecause it's fully potted and cut-to-length, the Eclipse SL100 handles the vibration, moisture, and flex of a working boat far better than generic strip lighting pulled off a shelf. Lumishore backs it with a 3-year warranty, so you're covered well past that first season. If you're planning a lighting refresh and you want a clean blue look that stays hidden until it's switched on, this 1-meter Eclipse strip is a smart, low-fuss place to start. Buy a few and light the whole cockpit.\u003c\/p\u003e\n\u003cp\u003ePractical touches make the Eclipse SL100 easy to live with. The flexible potted body follows gentle curves, so it hugs a rounded gunwale or the underside of a coaming without fighting you during the install. Because the whole strip is sealed, there are no exposed solder points to corrode over a season of salt air, which is where cheaper lighting tends to fail first. Pair it with tinned marine wire and a properly rated switch, and you've got an accent light that should keep glowing season after season. It's a small part with an outsized effect on how your boat looks and feels once the sun drops below the horizon.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSoft blue marine accent lighting that stays hidden in gunwales, under furniture, and behind panels\u003c\/li\u003e\n  \u003cli\u003e60 blue LEDs per meter for smooth, even light with no dark gaps\u003c\/li\u003e\n  \u003cli\u003eFully encapsulated and potted, rated IP68 against spray, wash-downs, and submersion\u003c\/li\u003e\n  \u003cli\u003eCut-to-length design, trim to fit then seal the cut end before installation\u003c\/li\u003e\n  \u003cli\u003ePlug and play with a simple two-wire electrical connection\u003c\/li\u003e\n  \u003cli\u003eLow 0.5A per meter draw, about 6 watts per meter, easy on the house battery\u003c\/li\u003e\n  \u003cli\u003eRuns on 12V DC and tolerates the normal 10 to 15 volt range\u003c\/li\u003e\n  \u003cli\u003eControl with a basic on\/off switch or the Eclipse Command Center\u003c\/li\u003e\n  \u003cli\u003eBacked by a 3-year Lumishore warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Lumishore reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is this Eclipse SL100 strip?\u003c\/summary\u003e\n    \u003cp\u003eThis model is single-color blue. It uses 60 blue LEDs per meter for a soft, even blue glow. Lumishore also offers white and dual blue-and-white versions if you want a different look.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I cut the strip to fit a shorter run?\u003c\/summary\u003e\n    \u003cp\u003eYes. The Eclipse SL100 is cut-to-length. Trim it at the marked cut point to fit your space, then seal the cut end before you install it so the waterproofing stays intact.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow waterproof is it?\u003c\/summary\u003e\n    \u003cp\u003eIt carries an IP68 ingress protection rating and the whole strip is fully encapsulated and potted. That handles spray, wash-downs, and short submersion. Just make sure any cut end is properly sealed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat voltage does it need?\u003c\/summary\u003e\n    \u003cp\u003eIt runs on a 12V DC supply and tolerates the normal 10 to 15 volt range you'll see as batteries charge and discharge. Wiring is a simple two-wire connection.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much power does it draw?\u003c\/summary\u003e\n    \u003cp\u003eAbout 0.5A per meter, which works out to roughly 6 watts per meter. That's light enough to add several runs without worrying about draining the house battery at anchor.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhere do boaters usually mount these?\u003c\/summary\u003e\n    \u003cp\u003eCommon spots are gunwales, under the helm dash, beneath cabin furniture, along steps, and behind ceiling panels. The idea is to hide the strip so you see the glow, not the source.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I control it?\u003c\/summary\u003e\n    \u003cp\u003eYou can wire it to a simple on\/off switch for instant lighting, or connect it to the Eclipse Command Center to fold it into a wider Lumishore lighting system.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it hard to install?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's plug and play with a two-wire electrical connection, so most boaters can handle it without a professional. Cut to length if needed, seal the end, mount it, and wire it up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long is this strip and can I connect more?\u003c\/summary\u003e\n    \u003cp\u003eThis is the 1-meter length. Lumishore offers the Eclipse SL100 in longer sizes too, and you can run several strips around the boat for full accent coverage.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat warranty does it come with?\u003c\/summary\u003e\n    \u003cp\u003eLumishore backs the Eclipse SL100 with a 3-year warranty, so you're covered well beyond the first season on the water.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eLumishore Eclipse SL100 1m Blue LED Strip Light\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eLumishore\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e010-04477-00\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e847772003347\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMarine LED Accent Strip Light\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Density\u003c\/th\u003e\n\u003ctd\u003e60 blue LEDs per meter\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1 meter\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupply Voltage\u003c\/th\u003e\n\u003ctd\u003e12V DC (10 to 15V DC range)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMax Current Draw\u003c\/th\u003e\n\u003ctd\u003e0.5A per meter (6W per meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIngress Protection\u003c\/th\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eControl Options\u003c\/th\u003e\n\u003ctd\u003eOn\/off switch or Eclipse Command Center\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMechanical Installation\u003c\/th\u003e\n\u003ctd\u003eCut to length and seal the cut end before installation, plug and play\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eElectrical Installation\u003c\/th\u003e\n\u003ctd\u003eSimple two-wire connection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eFully encapsulated and potted\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is this Eclipse SL100 strip?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This model is single-color blue. It uses 60 blue LEDs per meter for a soft, even blue glow. Lumishore also offers white and dual blue-and-white versions if you want a different look.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I cut the strip to fit a shorter run?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The Eclipse SL100 is cut-to-length. Trim it at the marked cut point to fit your space, then seal the cut end before you install it so the waterproofing stays intact.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How waterproof is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It carries an IP68 ingress protection rating and the whole strip is fully encapsulated and potted. That handles spray, wash-downs, and short submersion. Just make sure any cut end is properly sealed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What voltage does it need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It runs on a 12V DC supply and tolerates the normal 10 to 15 volt range you'll see as batteries charge and discharge. Wiring is a simple two-wire connection.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much power does it draw?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"About 0.5A per meter, which works out to roughly 6 watts per meter. That's light enough to add several runs without worrying about draining the house battery at anchor.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Where do boaters usually mount these?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Common spots are gunwales, under the helm dash, beneath cabin furniture, along steps, and behind ceiling panels. The idea is to hide the strip so you see the glow, not the source.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I control it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You can wire it to a simple on\/off switch for instant lighting, or connect it to the Eclipse Command Center to fold it into a wider Lumishore lighting system.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it hard to install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's plug and play with a two-wire electrical connection, so most boaters can handle it without a professional. Cut to length if needed, seal the end, mount it, and wire it up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long is this strip and can I connect more?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This is the 1-meter length. Lumishore offers the Eclipse SL100 in longer sizes too, and you can run several strips around the boat for full accent coverage.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What warranty does it come with?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Lumishore backs the Eclipse SL100 with a 3-year warranty, so you're covered well beyond the first season on the water.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":44784489070685,"sku":"1004534","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/LMS0100447700.jpg?v=1784896334","url":"https:\/\/nvnmarine.com\/products\/lumishore-eclipse-sl100-1m-blue-led-strip-light","provider":"NVN Marine","version":"1.0","type":"link"}