Lumishore ECLIPSE DL55 RGBW Downlight, 12V White Bezel
Lumishore ECLIPSE DL55 RGBW Downlight, 12V White Bezel — Product description
The Lumishore ECLIPSE DL55 is an RGBW marine downlight for overhead cabin and cockpit areas. It mixes clean 5000K white with red, green, and blue color, seats into just 21mm of depth with spring clips, and carries an IP67 rating with a clean white bezel finish.
The Lumishore ECLIPSE DL55 Downlight is a compact overhead light built to bring both practical white light and full-color mood lighting to the interior and covered spaces of your boat. Downlights like the DL55 are the fixtures you set into a cabin headliner, a hardtop underside, a cockpit ceiling, or a covered helm area to wash the space below in even, controllable light. This version pairs a clean white channel with red, green, and blue, so a single fixture handles everything from serious task lighting to a relaxed evening color scheme.
The RGBW output is what makes this downlight so flexible. The white channel runs at a crisp 5000K for genuine working and courtesy light, while the added red, green, and blue channels let you shift the room to whatever mood suits the moment. Set a warm relaxed tone at anchor, run red to protect night vision at the helm, or match your color scheme to the rest of the boat. Each color comes from a dedicated 3W LED, with one 3W LED each for red, green, blue, and white, so the mixing stays clean and the output stays bright.
Lumishore designed the DL55 to install almost anywhere overhead, and the mechanical details show it. The fixture is remarkably shallow, seating into just 21mm, about 0.83 inch, of depth behind the mounting surface, so it fits into thin headliners and tight overhead cavities where a deeper light would never go. It drops into a 50.8mm, or 2.0 inch, hole and the front bezel measures 64.0mm, about 2.519 inches, across, with a low 3.0mm profile that sits nearly flush against the surface. Stainless steel spring clips hold it firmly in place, and marine adhesive is available as an optional extra for surfaces where clips alone aren't ideal.
Because it's meant for overhead and covered areas that still see moisture, the DL55 is fully water-sealed to an IP67 rating. That's exactly what you want for a fixture that lives in a cabin overhead or under a hardtop, where condensation, spray, and the occasional wet hand are all part of the deal. It won't flinch at the damp reality of boat life.
Wiring is refreshingly simple. The DL55 uses a straightforward two-wire electrical connection and runs on 12V DC only, within a 10 to 15V DC window, drawing a modest 0.4A. You can switch it with a simple on/off switch for a basic install, or connect it to the ECLIPSE Command Center for full color and switching control alongside the rest of your Lumishore lighting. Either way, the low current draw means you can run several downlights without straining your electrical system.
This white-bezel version is finished to blend cleanly into light-colored headliners and trim, and it's part of a broader ECLIPSE range so you can build a matched lighting scheme across the boat. Set a few DL55 downlights into a cabin overhead for even, glare-free light, add them under a hardtop to brighten the cockpit, or place them over a galley or dinette where you want controllable color and clean white on demand.
Because the DL55 is so shallow and easy to wire, it opens up spots that are awkward for bulkier lights. You can set them into a headliner with only an inch or so of clearance behind it, group several on one circuit for even overhead coverage, or scatter them to pick out specific areas like a chart table or a berth. Running the white channel gives you honest, glare-free task light, while the color channels let you drop the whole space into a relaxed evening scene without touching a separate fixture. It's a lot of flexibility from a light that all but disappears into the ceiling once it's in.
Lumishore backs the ECLIPSE DL55 with a 3-year warranty, and the fully sealed IP67 build is made to hold up to it. If you want a shallow, easy-to-fit overhead downlight that gives you both crisp white and full RGBW color from one compact fixture, the DL55 is a versatile, marine-tough choice for lighting the spaces you spend time in.
Key Features
- RGBW output combines crisp 5000K white with red, green, and blue color
- One dedicated 3W LED each for red, green, blue, and white
- Shallow 21mm install depth fits thin headliners and tight overheads
- Drops into a 50.8mm (2.0 in) hole with a 64.0mm bezel
- Low 3.0mm bezel profile sits nearly flush
- Stainless steel spring clips, optional marine adhesive
- Fully water-sealed to an IP67 rating
- Simple two-wire electrical connection
- Runs on 12V DC only, drawing just 0.4A
- Clean white bezel finish to match light interiors
- Control by on/off switch or the ECLIPSE Command Center
- Backed by a 3-year Lumishore warranty
Why Buy from NVN Marine
- Authorized Lumishore reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Lumishore ECLIPSE DL55 RGBW Downlight, 12V White Bezel |
|---|---|
| Brand | Lumishore |
| Manufacturer Part Number | 010-04540-00 |
| UPC | 847772004290 |
| Model | ECLIPSE DL55 |
| Available Colors | White (5000K) plus Red, Green, Blue (RGBW) |
| LED Type | 1 x 3W each of Red, Green, Blue, and White LEDs |
| Supply Voltage Range | 12V DC only (10 to 15V DC) |
| Max Current Draw | 0.4A |
| Water Ingress Rating | IP67 |
| Installed Depth | 21mm (0.83 in) |
| Bezel Profile | 3.0mm (0.118 in) |
| Front Bezel Diameter | 64.0mm (2.519 in) |
| Hole Diameter for Fitting | 50.8mm (2.0 in) |
| Bezel Finish | White |
| Mechanical Installation | Stainless steel spring clips, marine adhesive optional |
| Electrical Installation | Simple 2-wire connection |
| Control Options | On/off switch or ECLIPSE Command Center |
| Warranty | 3 Years |
Frequently asked questions
What does RGBW mean on this downlight?
RGBW means the fixture combines red, green, and blue color channels with a dedicated white channel. You get clean 5000K white for working light plus full color for mood lighting, all from one downlight.
How deep does it need to sit?
It's very shallow, seating into just 21mm, about 0.83 inch, of depth behind the mounting surface. That lets it fit thin headliners and tight overhead cavities where a deeper light won't go.
What size hole does it need?
It drops into a 50.8mm, or 2.0 inch, hole. The front bezel measures 64.0mm, about 2.519 inches, across, with a low 3.0mm profile that sits nearly flush.
How is it held in place?
It uses stainless steel spring clips that grip the mounting surface. Marine adhesive is available as an optional extra for surfaces where clips alone aren't ideal.
Is it waterproof?
Yes. The DL55 is fully water-sealed to an IP67 rating, which suits overhead and covered areas that still see condensation, spray, and wet hands.
How much power does it draw?
It runs on 12V DC only, within a 10 to 15V DC window, and draws just 0.4A. That low draw lets you run several downlights without straining your electrical system.
How do I control the colors?
You can wire it to a simple on/off switch for a basic setup, or connect it to the ECLIPSE Command Center for full color and switching control alongside your other Lumishore lighting.
What finish is the bezel?
This version has a clean white bezel, finished to blend into light-colored headliners and trim. It's part of the broader ECLIPSE range, so you can build a matched lighting scheme across the boat.