Lumishore Eclipse DL55 RGBW Downlight, Black Bezel, 12V
Lumishore Eclipse DL55 RGBW Downlight, Black Bezel, 12V — Product description
The Lumishore Eclipse DL55 is a full-color RGBW overhead downlight for boats, blending crisp 5000K white with red, green, and blue accents. It's IP67 water-sealed, fits a shallow 21mm recess, and wires up with just two conductors, so you can light a cabin or cockpit exactly the way you want.
The Lumishore Eclipse DL55 RGBW downlight is the one to reach for when you want a single overhead fixture to do everything. Bright, clean 5000K white for reading a chart or working over the galley counter. Warm-to-cool color washes for a relaxed evening at anchor. It's all built into one compact fixture with a black bezel that sits nearly flush with your headliner.
Lumishore builds these Eclipse downlights for the overhead spaces where you actually spend time, cabins, cockpits, hardtops, and covered helm stations. The body is fully water-sealed to an IP67 rating, so spray, condensation, and the odd rain shower won't bother it. That matters on a boat, where a light mounted in a coachroof or under a T-top lives a much harder life than anything in a house.
The RGBW mix is what sets this model apart from the single-color and dual-color DL55 lights. You get dedicated 5000K white LEDs for real, usable task light, plus red, green, and blue emitters for color. Dial in a soft blue glow for a night watch that protects your eyes, a green wash for a party at the dock, or full white when you need to see what you're doing. Each 3W LED is driven for even, glare-controlled output rather than a harsh hot spot.
Control is refreshingly simple. Run the light off a basic on/off switch if that's all you need, or connect it to the Lumishore ECLIPSE Command Center to scroll through colors and scenes from one place. Either way the wiring stays the same, a straightforward two-wire hookup that any competent installer, or a confident owner, can handle in an afternoon.
Installation is where the DL55 really earns its keep. The fixture needs a 50.8mm (2.0 in) hole and drops into a recess just 21mm (0.83 in) deep, which means it fits headliners and panels that would defeat a bulkier light. Stainless steel spring clips hold it firmly from behind, so there are no visible screws marring the face. If you're working in a spot where clips alone won't do, a bead of marine adhesive is an optional backup. The bezel measures 64.0mm (2.519 in) across and the installed profile stands just 3.0mm proud of the surface, so it reads as a tidy, intentional part of the boat rather than an add-on.
Power draw is modest. The DL55 runs on a 12V DC supply within a 10 to 15V range and pulls a maximum of 0.4A, so you can run several around a cabin without worrying about your house bank. That low current also means less heat and less voltage drop across long runs, which keeps colors consistent from the first fixture to the last.
If you've been living with dim, yellowed old dome lights, the difference here is night and day. You're getting modern LED efficiency, a sealed marine-grade body, real color control, and a clean flush look, all in a fixture small enough to go almost anywhere overhead. It's a smart upgrade whether you're refitting a older cruiser or wiring up a new center console, and it's backed by a 3-year warranty so you can install it with confidence.
We'd pair a few of these through a saloon or cockpit and wire them to the Command Center so you can shift the whole space from task-bright to anchor-relaxed with one control. That's the kind of flexibility that makes a boat feel finished.
Think about how you actually use your boat after dark. Coming back to the dock, you want honest white light to see lines and cleats. Hosting friends in the cockpit, a color wash sets the tone without blinding anyone. On an overnight, a dim blue keeps your night vision intact when you get up to check the anchor. One RGBW fixture covers all of that, which is why it's a more sensible buy than installing separate white and colored lights. And because the whole DL55 range shares this body and cutout, you can mix these full-color units with single-color models elsewhere on the boat and every fixture still looks like it belongs to the same set.
Key Features
- Full-color RGBW output: crisp 5000K white plus red, green, and blue accent LEDs in one fixture
- IP67 fully water-sealed body stands up to spray, condensation, and rain in overhead marine spaces
- Shallow 21mm (0.83 in) install depth fits tight headliners and panels
- Simple two-wire hookup works with a basic on/off switch or the ECLIPSE Command Center
- Stainless steel spring clips give a clean, screw-free flush finish
- Low 0.4A max draw on 12V DC lets you run several without straining the house bank
- Black bezel and slim 3.0mm installed profile for a tidy, intentional look
- Backed by a 3-year warranty
Why Buy from NVN Marine
- Authorized Lumishore reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Lumishore Eclipse DL55 RGBW Downlight, Black Bezel, 12V |
|---|---|
| Brand | Lumishore |
| Manufacturer Part Number | 010-04541-00 |
| UPC | 847772004306 |
| Product Type | Marine LED Downlight |
| Available Colors | White (5000K) plus Red, Green, Blue |
| LED Type | 3W Red, Green, Blue and White LEDs |
| Bezel Finish | Black |
| Control Options | On/Off Switch or ECLIPSE Command Center |
| Electrical Installation | Simple 2-wire installation |
| Supply Voltage Range | 12V DC only (10 to 15V DC) |
| Max Current Draw | 0.4A |
| Ingress Protection | IP67 |
| Bezel Diameter | 64.0mm (2.519 in) |
| Installed Profile | 3.0mm (0.118 in) |
| Cutout Hole Diameter | 50.8mm (2.0 in) |
| Install Depth | 21mm (0.83 in) |
| Mechanical Installation | Stainless steel spring clips, marine adhesive optional |
| Warranty | 3 Years |
Frequently asked questions
What colors can the Eclipse DL55 RGBW produce?
It combines dedicated 5000K white LEDs with red, green, and blue emitters, so you get true task-quality white plus a full range of color washes from soft blue to green to warm mixed tones.
How deep a recess does the DL55 need?
The fixture drops into a shallow 21mm (0.83 in) recess and requires a 50.8mm (2.0 in) cutout, which makes it easy to fit in thin headliners and panels where a deeper light won't go.
How is it held in place?
Stainless steel spring clips grip from behind for a clean, screw-free face. In spots where clips alone aren't ideal, you can add marine adhesive as an optional backup.
What voltage and current does it require?
It runs on a 12V DC supply within a 10 to 15V range and draws a maximum of 0.4A, so it's easy on your house battery bank.
Is it safe to use in wet or exposed areas?
Yes. The DL55 is fully water-sealed to an IP67 rating, so it handles spray, condensation, and rain in cabins, cockpits, and under hardtops.
Do I need a special controller?
No. You can run it from a simple on/off switch. If you want to change colors and scenes, connect it to the Lumishore ECLIPSE Command Center. The two-wire hookup stays the same either way.
What size is the visible bezel?
The black bezel measures 64.0mm (2.519 in) across and sits just 3.0mm proud of the mounting surface for a slim, flush appearance.
How hard is the wiring?
It's a straightforward two-wire connection. Most owners with basic 12V wiring experience can install one in an afternoon, and it's backed by a 3-year warranty.