Lewmar

Lewmar Medium Profile Hatch 39940020, Gray Aluminum Frame

SKU: 2011594 · UPC: 743683116131 · MPN: 39940020
★★★★★ 4.7 · 0 reviews
Authorized dealer Free Shipping40% off
$543.99
$919.95Save $375.96
or 4 payments of $135.99 with Affirm · See disclosures
In stock — Ships today Pickup Next-Day · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$543.99
02 · Overview

Lewmar Medium Profile Hatch 39940020, Gray Aluminum Frame — Product description

The Lewmar 39940020 is a medium profile deck hatch with a gray aluminum frame and an acrylic glass lid. It's 19-3/8 inches square and just 1-1/4 inches tall, with a friction lever that holds the lid open up to 95 degrees. A low-profile way to bring light and fresh air below.

This is a medium profile hatch from Lewmar with a gray aluminum frame and an acrylic glass lid. The outside of the frame measures 19-3/8 inches long by 19-3/8 inches wide and stands 1-1/4 inches tall, so it sits low on the deck or cabin top. That low stance is the whole point of a medium profile hatch. You get light and air below without a tall dome catching sheets, lines, or shins on the way past.

The lid opens on a friction lever and holds up to 95 degrees. A friction lever doesn't click into fixed stops. You swing the lid to where you want it and the friction holds it there. That's handy for cracking it a few inches for ventilation or throwing it wide for light and a cross breeze. It also means you should treat this as a ventilation hatch and not a lock. On a rough passage, close it down and don't count on the lever alone to keep it shut.

Before you order, grab a tape measure. The cutout is 16-9/16 inches long by 16-9/16 inches wide, a square opening. Your hole needs to be square and cut close to that size. An out-of-square opening can bind the lid and load the friction lever unevenly. Take your time on the layout, check the diagonals, and cut a hair small so you can file it to fit. It's much easier to take material away than to put it back.

A hatch frame like this is happiest on a flat or lightly crowned surface, like a cabin top or cockpit sole on a small cruiser or center console. If your deck has a pronounced crown or a compound curve, plan on shims or a bedding layer under the frame. Otherwise the corners can leak and the lid may not sit flat. Highly curved decks may need a riser, so look at the surface before you cut anything.

If the deck is cored, seal the exposed core edges of the cutout so water can't wick into the laminate. Through-bolts with backing plates hold better than screws threaded into core. Pick a marine sealant that's compatible with both acrylic and aluminum, since some sealant chemistries are hard on acrylic. Mask the lens while you work, because solvents can craze it. We don't list a screen, trim ring, or fastener kit with this hatch, so figure out what you need before the saw comes out.

Here's a simple way to plan the job. Start by confirming the surface is where you want it, then trace the 16-9/16 inch square on the deck or cabin top and check it from both sides. Look below for wiring, hoses, and framing that might be in the way. Make a template from cardboard first and hold it in place. Once the hole is cut, dry-fit the hatch before any sealant goes on. The frame should sit down evenly on all four sides with the lid closing flat. If it rocks or leaves a gap, fix that now with shims or by dressing the opening, not after the sealant has cured.

Salt will find the friction lever eventually. A freshwater rinse now and then keeps things moving, and the lever is a wear item, so expect to adjust it over the years. If the acrylic sits in full sun all season, a cover is cheap insurance for the lens.

Good spots for a hatch this size include a cabin top over a berth, a head compartment, or a locker that needs light and air. It's a ventilation and light hatch. Our listing doesn't describe it as an escape hatch, so don't plan on it as one.

Key Features

  • Medium profile, 1-1/4 inch height, so it sits low on the deck and stays out of the way of lines and feet.
  • 19-3/8 inch by 19-3/8 inch overall frame size, a square footprint that's easy to lay out.
  • Aluminum frame with a gray finish, built for a marine deck environment.
  • Acrylic glass lid lets light in below while keeping the weather out when it's closed.
  • 16-9/16 inch by 16-9/16 inch cutout, so measure and square your opening before you cut.
  • Friction lever holds the lid wherever you set it, no fixed stops to hunt for.
  • Opens up to 95 degrees for good airflow and easy access.
  • Lewmar part number 39940020 for easy reordering and fitment checks.

Why Buy from NVN Marine

  • Authorized Lewmar reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Next-Day) $543.99
03 · The numbers

Technical specifications

Title Medium Profile Hatch, 19-3/8 Inch Length x 19-3/8 Inch Width x 1-1/4 Inch Height, With Aluminum Frame, Gray, Acrylic Glass, 16-9/16 Inch Length x 16-9/16 Inch Width Cutout, With Friction Lever, Holds Up To 95 Degree Lid Opening
Brand Lewmar
Manufacturer Part Number 39940020
UPC 743683116131
Hatch Profile Medium Profile
Overall Length 19-3/8 Inch
Overall Width 19-3/8 Inch
Overall Height 1-1/4 Inch
Frame Material Aluminum
Color Gray
Lens Material Acrylic Glass
Cutout Length 16-9/16 Inch
Cutout Width 16-9/16 Inch
Lid Hold Open Friction Lever
Maximum Lid Opening 95 Degrees
04 · Before you buy

Frequently asked questions

What size cutout does this hatch need?

The cutout is 16-9/16 inches long by 16-9/16 inches wide. Keep the opening square and cut close to size so the lid doesn't bind.

How big is the hatch frame on the outside?

The frame measures 19-3/8 inches long by 19-3/8 inches wide and is 1-1/4 inches tall.

What is it made of?

It has an aluminum frame in gray with an acrylic glass lid.

How far does the lid open?

It holds up to 95 degrees of lid opening.

How does the lid stay open?

A friction lever holds the lid in position. It isn't a lock, so close the hatch down for rough water.

Does it come with a screen or fastener kit?

Our listing doesn't show a screen, trim ring, or fastener kit as included, so plan on sourcing those separately and check your needs before you cut the deck.

Will it fit a curved deck?

It's best on a flat or lightly crowned surface. A pronounced crown may need shims or a bedding layer, and a heavily curved deck may need a riser.

What sealant should I use?

Choose a marine sealant that's compatible with both acrylic and aluminum, and follow the sealant maker's directions. Mask the lens during install, since solvents can craze acrylic.

Can I use it as an escape hatch?

Our listing doesn't describe it as an escape hatch, so we don't recommend relying on it for that. Think of it as a light and ventilation hatch.

05 · Customer voices

Customer reviews