LENCO SD Pro Control Auto Trim Tab Actuator Kit (Set of 2, 12V)
LENCO SD Pro Control Auto Trim Tab Actuator Kit (Set of 2, 12V) — Product description
LENCO's SD Pro trim tab actuator kit brings automatic leveling to your boat with a single ram per tab. This 12-volt set of two runs on the Pro Control Auto system, using an onboard IMU to read your boat's attitude and trim it out for you. Everything you need to rig it up ships in the box.
Trim tabs earn their keep the moment your boat climbs onto plane. LENCO's Pro Control Auto system takes it a step further by doing the trimming for you. An inertial measurement unit reads pitch and roll in real time, then drives the actuators to keep the hull flat and settled without you touching a thing.
This kit is the SD Pro type actuator, set up with a single ram per tab. Each actuator has a 2-1/4 inch stroke and a 10-1/2 inch overall length, running on standard 12-volt DC. You get two actuators in the set, enough to rig both tabs on a typical transom.
The box has what you need to wire it in: the Pro Control Auto IMU, the keypad, power actuator cables, network cables, Deutsch connectors, and the mounting brackets and hardware. It's a clean install for anyone comfortable running a few cable pulls back to the helm.
Key Features
- SD Pro type actuator with a 2-1/4 inch stroke and 10-1/2 inch overall length for consistent tab travel
- Pro Control Auto system with an onboard IMU that reads boat attitude and trims automatically
- 12-volt DC operation, single ram per tab, sold as a set of two
- Includes the Pro Control Auto IMU, keypad, power actuator cables, network cables, and Deutsch connectors
- Mounting brackets and hardware in the box for a complete install
Why Buy from NVN Marine
- Authorized LENCO reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | LENCO SD Pro Control Auto Trim Tab Actuator Kit (Set of 2) |
|---|---|
| Brand | LENCO |
| Manufacturer Part Number | 15231-108 |
| UPC | 874847009591 |
| Actuator Type | SD Pro Type |
| Stroke Length | 2-1/4 Inch |
| Overall Length | 10-1/2 Inch |
| Voltage | 12 Volt |
| Quantity | Set of 2 |
| Control System | Pro Control Auto (single ram per tab) |
| Included Control Components | Pro Control Auto IMU and Pro Control Keypad |
| Included Cabling | Power actuator cables and network cables |
| Connectors | Deutsch connectors |
| Mounting | Mounting brackets and hardware included |
Frequently asked questions
How many actuators come in this kit?
It's a set of two, one actuator per trim tab, which covers both tabs on a standard transom.
What voltage does the system run on?
The actuators run on 12-volt DC, standard for most boat electrical systems.
Does this system trim the boat automatically?
Yes. The Pro Control Auto system uses an onboard IMU to sense the boat's attitude and adjust the tabs for you, with no manual input needed.
What are the stroke and overall length of the actuator?
Each SD Pro type actuator has a 2-1/4 inch stroke and a 10-1/2 inch overall length.
Do I need to buy cables and mounting hardware separately?
No. The kit ships with power actuator cables, network cables, Deutsch connectors, the keypad, the IMU, and the mounting brackets and hardware.
