JL Audio VeX Swivel Pipe Mount Fixtures, 3 In, Set of 2

These are the swivel pipe mounting fixtures JL Audio builds for hanging their VeX enclosed speaker systems on a tower pipe or roll cage. You get a set of two, which is exactly what you need to put a pair of enclosures up top and point them where the crew actually sits. If you've been running your boat with speakers bolted flat and firing off in one fixed direction, this is the upgrade that lets you aim the sound.

The fixtures are machined and low-profile, so they clamp tight to a 3 inch round pipe without looking like an afterthought. That 3 inch spec matters. It's the diameter the clamp is cut for, and it's meant for a nominal 3.000 inch tower pipe. Measure your pipe before you order. A lot of towers run 2.875 inches or 3.250 inches, and this fixture is the one cut for a true 3 inch pipe. JL Audio makes the same swivel fixture in other diameters, so if your pipe measures different there's a match for it. Get the size right and the clamp bites down solid with no slop.

Here's why the swivel is the part that earns its keep. On a wakeboard tower the crossbar sits high, and the riders and the folks in the boat are down and behind. A speaker clamped rigid just throws sound at the sky. The swivel lets you tilt and rotate each enclosure down and back toward the cockpit, so you're not wasting output over everyone's head. Set it once, lock it down, and you've got sound pointed where it belongs. Fold them when you trailer, aim them when you play.

We've rigged plenty of tower audio, and the little things are what make an install last. Snug the clamp hardware evenly so the fixture seats square on the pipe. A dab of blue thread locker on the swivel bolt is cheap insurance against tower vibration walking it loose over a season of chop and wake sets. And if you run in salt, give the hardware a fresh water rinse now and then and keep an eye on the fasteners. Stainless swap-ins are an easy call for a saltwater boat that lives on a lift. Do that and these will hold aim for years.

Match them to the VeX enclosures they're built for. These fixtures are sized and rated for the VeX enclosed speaker line, so pair them with the enclosures in that family for a clean, factory-style result. The set of two covers a standard pair. If you're running a bigger array with more than two pods, you'll want additional sets to match your count.

One thing to check before you commit is clearance. The fixtures sit fairly low on the pipe, so on a tower with a low crossbar or a bimini folded nearby, make sure the enclosure has room to swivel through its range without knocking hardware. Two minutes with a tape measure up front saves a headache at the ramp. For most towers there's plenty of room, and the payoff is real, aimable sound from a mount that looks like it came with the boat.

Who's this for? Any boater adding VeX enclosures to a tower and tired of sound that misses the cockpit. First boat with a tower and a fresh set of pods, or a seasoned wakeboat owner redoing the audio, the answer's the same. You get a solid clamp, real aiming, and a low-profile look that doesn't clutter the tower. It's a small part that changes how the whole system sounds out on the water. Cheap upgrade, big difference, and it's the kind of detail that separates a rig that was thought through from one that was just bolted together. Get the pipe size right, snug it down, aim it once, and you're set for the season.