{"product_id":"jl-audio-m6-770x-7-7in-marine-speaker-white-luxe","title":"JL Audio M6 7.7in Coaxial Marine Speaker, White LUXe Grille","description":"\u003cp class=\"nvn-hero\"\u003eThe JL Audio M6-770X is a 7.7-inch coaxial marine speaker built for boats where sound quality and a clean look both matter. You get 100 watts of continuous power handling, a silk dome tweeter, and the low-profile White LUXe grille that all but disappears into a nice cabin. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eJL Audio built the M6 line for the kind of boat where the audio is expected to keep up with everything else on board. The M6-770X is the 7.7-inch coaxial in that family, and this version pairs a white trim ring with the fine-mesh White LUXe grille. It's a discreet look. The grille sits nearly flush, protruding just 0.38 inches into the cabin, so it blends into a headliner or a nice fiberglass panel instead of shouting for attention.\u003c\/p\u003e\n\u003cp\u003eHere's why the oversized 7.7-inch cone matters. A bigger cone moves more air for the same watts, so you get more real output per amp of power. Combine that efficiency with long excursion and honest power handling, and you've got a speaker that stays clean when you're running a center console at speed with the wind and engine noise fighting you. It's rated at 91.0 dB efficiency at 1 watt, 1 meter, and it'll take 100 watts RMS continuous.\u003c\/p\u003e\n\u003cp\u003eThe highs come off a 1-inch pure silk dome tweeter that JL specially treats to survive the salt, sun, and spray. That treatment is the whole point on an open boat. A raw tweeter dome doesn't last a season out there. This one stays articulate up at the top of the volume knob, which is where a lot of cheaper marine speakers turn harsh. There's also an automatic tweeter protection circuit built in, so an over-enthusiastic afternoon at full tilt is less likely to cook the tweeter.\u003c\/p\u003e\n\u003cp\u003eInside the woofer chassis sits a multi-order, true 2-way passive crossover. Tucking it inside the frame keeps it shielded from vibration and corrosion, which are the two things that kill crossovers on a boat. You don't have to find a dry spot to mount a separate crossover box, and there's nothing extra to corrode behind a panel.\u003c\/p\u003e\n\u003cp\u003eNow, about power. These will technically run on as little as 40 watts per channel, but that's not where they shine. JL recommends 40 to 200 watts of clean continuous power per channel, and honestly, the more clean power you feed them the better they sound. Wiring them straight off a head unit's internal amp works, but you'll clip the dynamics and you'll hear it distort as you push the volume. If you can, run them off a dedicated amp like a JL Audio MVi or an M-series amplifier. That's the difference between background music and a system you actually want to crank.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward if you respect the cutout. The mounting hole is 7.50 inches and you need 4.26 inches of mounting depth behind the panel, so check your clearance before you cut. Use the JL cutout template exactly. A 6.5-inch hole is too small for this flange, and forcing it risks cracking gelcoat around the opening. On thinner fiberglass panels, back up the mount with a proper backing plate. The magnet on a speaker this size has some real weight to it. And heat-shrink your wire terminals. Salt loves an open connection, and a sealed terminal is the single easiest thing you can do to make these last.\u003c\/p\u003e\n\u003cp\u003eThese are made in JL Audio's Miramar, Florida factory using global components, and they carry a 2-year USA limited warranty from the original date of purchase. One more thing worth saying plainly: this is a single speaker. If you're doing a pair on the bow or a full four-speaker layout, order the count you need. A lot of folks assume marine speakers come in twos, and the M6-770X is sold individually.\u003c\/p\u003e\n\u003cp\u003eIf you're weighing this against the smaller M3 line, the short version is the M6 is the step up in build, tweeter treatment, and grille options. The M3 is a fine value speaker. The M6 is the one you buy when you want the sound and the finish to match a nicer boat.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e7.7-inch coaxial design moves more air per watt for higher efficiency and more real output at speed\u003c\/li\u003e\n  \u003cli\u003e100 W RMS continuous power handling, with 40 to 200 W per channel of recommended amplifier power\u003c\/li\u003e\n  \u003cli\u003e1-inch pure silk dome tweeter, specially treated to survive salt, sun, and spray\u003c\/li\u003e\n  \u003cli\u003e91.0 dB system efficiency at 1 W \/ 1 m so it plays loud and clear in an open boat\u003c\/li\u003e\n  \u003cli\u003e45 Hz to 25 kHz frequency response for full-range sound from a single speaker\u003c\/li\u003e\n  \u003cli\u003eMulti-order, true 2-way passive crossover concealed inside the woofer chassis, shielded from vibration and corrosion\u003c\/li\u003e\n  \u003cli\u003eAutomatic tweeter protection circuit guards against tweeter failure at high volume\u003c\/li\u003e\n  \u003cli\u003eLow-profile mounting bezel with integrated tweeter bridge and fine-mesh White LUXe grille, protruding only 0.38 inches\u003c\/li\u003e\n  \u003cli\u003e7.50-inch mounting cutout with 4.26-inch mounting depth\u003c\/li\u003e\n  \u003cli\u003e4-ohm nominal impedance for easy matching to marine amplifiers and head units\u003c\/li\u003e\n  \u003cli\u003eBuilt in JL Audio's Miramar, Florida factory with a 2-year USA limited warranty\u003c\/li\u003e\n  \u003cli\u003eWhite trim ring and White LUXe grille, sold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized JL Audio reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many speakers come in the box?\u003c\/summary\u003e\n    \u003cp\u003eJust one. The M6-770X is sold individually. If you want a pair on the bow or a four-speaker layout, order the quantity you need. Don't assume it comes in twos.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size hole do I need to cut?\u003c\/summary\u003e\n    \u003cp\u003eThe mounting hole diameter is 7.50 inches and you need 4.26 inches of mounting depth behind the panel. Use the JL Audio cutout template exactly. A 6.5-inch hole is too small for this flange and forcing it can crack the gelcoat around the opening.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much power do these need?\u003c\/summary\u003e\n    \u003cp\u003eThey'll run on as little as 40 watts per channel, but JL recommends 40 to 200 watts of clean continuous power per channel. The more clean power you give them, the better they sound. Wiring straight off a head unit works but clips the dynamics as you turn it up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need an amplifier?\u003c\/summary\u003e\n    \u003cp\u003eNot strictly, but we recommend one. A dedicated amp like a JL Audio MVi or an M-series amplifier gets the most out of these. Direct head-unit power will distort noticeably once you push past about 60 percent volume.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill the silk dome tweeter hold up in salt water?\u003c\/summary\u003e\n    \u003cp\u003eYes. The 1-inch pure silk dome is specially treated to withstand the marine environment. For best longevity, heat-shrink your wire terminals so salt can't creep into an open connection.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the difference between the M3 and M6 speakers?\u003c\/summary\u003e\n    \u003cp\u003eThe M6 is the step up. It uses a higher-grade build, a specially treated silk dome tweeter, and premium grille options like this LUXe finish. The M3 is a solid value speaker. The M6 is what you choose when you want the sound and the look to match a nicer boat.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the LUXe grille?\u003c\/summary\u003e\n    \u003cp\u003eIt's a fine-mesh grille on a low-profile mounting bezel with an integrated tweeter bridge. It sits nearly flush, protruding just 0.38 inches into the cabin, for a discreet look that blends into finer boat interiors.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat impedance are these and how do I wire them?\u003c\/summary\u003e\n    \u003cp\u003eThey're a 4-ohm nominal impedance, which matches easily to most marine amplifiers and head units. Wire each speaker to its own channel and heat-shrink the terminals against salt intrusion.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhere are these made and what is the warranty?\u003c\/summary\u003e\n    \u003cp\u003eProduction takes place in JL Audio's Miramar, Florida factory using global components and materials. They carry a 2-year USA limited warranty from the original date of purchase.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need to reinforce the mount on thin fiberglass?\u003c\/summary\u003e\n    \u003cp\u003eOn thinner panels, yes, back the mount with a proper backing plate. A speaker this size has a heavy magnet, and a backing plate keeps it solid and prevents flex around the cutout.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eJL Audio M6 7.7in Coaxial Speakers White LUXe Grille Single Speaker M6-770X-L-GwGw-Single\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eJL Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e010-03196-00\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e699440937573\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eUnited States (Miramar, FL)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eM6-770X-L-GwGw-Single\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpeaker Size\u003c\/th\u003e\n\u003ctd\u003e7.7 in \/ 196 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e2-way coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eContinuous Power Handling (RMS)\u003c\/th\u003e\n\u003ctd\u003e100 W\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended Amplifier Power (RMS)\u003c\/th\u003e\n\u003ctd\u003e40 - 200 W \/ Ch.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSystem Efficiency\u003c\/th\u003e\n\u003ctd\u003e91.0 dB @ 1 W \/ 1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSystem Nominal Impedance\u003c\/th\u003e\n\u003ctd\u003e4 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSystem Frequency Response\u003c\/th\u003e\n\u003ctd\u003e45 Hz - 25 kHz +\/- 3 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTweeter\u003c\/th\u003e\n\u003ctd\u003e1 in \/ 25 mm pure silk dome\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCrossover\u003c\/th\u003e\n\u003ctd\u003eMulti-order, true 2-way passive (concealed in woofer chassis)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTweeter Protection\u003c\/th\u003e\n\u003ctd\u003eAutomatic tweeter protection circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFrame Outer Diameter\u003c\/th\u003e\n\u003ctd\u003e9.13 in \/ 232 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBolt Hole Circle Diameter\u003c\/th\u003e\n\u003ctd\u003e8.18 in \/ 208 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFrontal Grille Protrusion\u003c\/th\u003e\n\u003ctd\u003e0.38 in \/ 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Hole Diameter\u003c\/th\u003e\n\u003ctd\u003e7.50 in \/ 191 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Depth\u003c\/th\u003e\n\u003ctd\u003e4.26 in \/ 108 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTrim Ring Color\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrille\u003c\/th\u003e\n\u003ctd\u003eWhite LUXe\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eSingle speaker (sold individually)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2-year USA limited from original date of purchase\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many speakers come in the box?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Just one. The M6-770X is sold individually. If you want a pair on the bow or a four-speaker layout, order the quantity you need. Don't assume it comes in twos.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size hole do I need to cut?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The mounting hole diameter is 7.50 inches and you need 4.26 inches of mounting depth behind the panel. Use the JL Audio cutout template exactly. A 6.5-inch hole is too small for this flange and forcing it can crack the gelcoat around the opening.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much power do these need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"They'll run on as little as 40 watts per channel, but JL recommends 40 to 200 watts of clean continuous power per channel. The more clean power you give them, the better they sound. Wiring straight off a head unit works but clips the dynamics as you turn it up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need an amplifier?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Not strictly, but we recommend one. A dedicated amp like a JL Audio MVi or an M-series amplifier gets the most out of these. Direct head-unit power will distort noticeably once you push past about 60 percent volume.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will the silk dome tweeter hold up in salt water?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The 1-inch pure silk dome is specially treated to withstand the marine environment. For best longevity, heat-shrink your wire terminals so salt can't creep into an open connection.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the difference between the M3 and M6 speakers?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The M6 is the step up. It uses a higher-grade build, a specially treated silk dome tweeter, and premium grille options like this LUXe finish. The M3 is a solid value speaker. The M6 is what you choose when you want the sound and the look to match a nicer boat.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the LUXe grille?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a fine-mesh grille on a low-profile mounting bezel with an integrated tweeter bridge. It sits nearly flush, protruding just 0.38 inches into the cabin, for a discreet look that blends into finer boat interiors.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What impedance are these and how do I wire them?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"They're a 4-ohm nominal impedance, which matches easily to most marine amplifiers and head units. Wire each speaker to its own channel and heat-shrink the terminals against salt intrusion.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Where are these made and what is the warranty?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Production takes place in JL Audio's Miramar, Florida factory using global components and materials. They carry a 2-year USA limited warranty from the original date of purchase.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need to reinforce the mount on thin fiberglass?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"On thinner panels, yes, back the mount with a proper backing plate. A speaker this size has a heavy magnet, and a backing plate keeps it solid and prevents flex around the cutout.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45000665268317,"sku":"1004663","price":210.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/JLA0100319600_001.jpg?v=1788748989","url":"https:\/\/nvnmarine.com\/products\/jl-audio-m6-770x-7-7in-marine-speaker-white-luxe","provider":"NVN Marine","version":"1.0","type":"link"}