{"product_id":"jl-audio-m-mcpv3-na-etxv3-nautique-tower-fixture","title":"JL Audio M-MCPV3-NA ETXv3 Speaker Fixture for Nautique Tower","description":"\u003cp class=\"nvn-hero\"\u003eThe JL Audio M-MCPV3-NA is a low-profile fixture set that mounts two ETXv2 or ETXv3 enclosed tower speakers on the OEM Nautique tower position used from 2009 to 2016. Clear anodized aluminum, stainless hardware, and a clean factory-style fit. It's a bolt-on, no drilling required.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe JL Audio M-MCPV3-NA is a purpose-built mounting fixture set for late-model Nautique boats. It takes two of JL Audio's ETXv2 or ETXv3 enclosed tower speakers and locks them onto the factory tower position Nautique used from 2009 through 2016. Low-profile, clean, and built to put up with real time on the water.\u003c\/p\u003e\n\u003cp\u003eThis isn't a universal clamp you shim to fit. It's shaped and finished to match the tower geometry on those model-year boats, so the speakers sit where they should and the whole setup looks like it came from the factory. Each set includes the fixtures for two speakers plus the stainless steel hardware to bolt everything down. The aluminum body wears a clear anodized finish, which is the right call for something that lives out in the sun and salt all season.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone running a Nautique wakeboat from that 2009 to 2016 window who wants to add or upgrade to ETX tower speakers. If that's you, this is the bracket that turns the job into a bolt-on. It clamps to the existing tower tube, so you're not drilling into your tower or fabricating anything. One tip before you order: measure your tower tube diameter and confirm it matches. Towers vary, and a quick check up front saves a return.\u003c\/p\u003e\n\u003cp\u003eIt's also worth knowing this fixture spans two generations of the ETX line. Whether you're mounting the older ETXv2 enclosures or the current ETXv3, the M-MCPV3-NA is designed to carry either one. So if you're upgrading speakers down the road but keeping the same tower, the bracket can usually stay put.\u003c\/p\u003e\n\u003cp\u003ePositioning is half of what makes tower speakers sound good, and that's really what a dedicated fixture like this buys you. Because it's matched to the Nautique tower, the ETX enclosures end up aimed back at the boat where the riders and the crew actually are, not scattered off at odd angles the way a generic clamp can leave them. Get the speakers pointed right and you'll hear the difference behind the boat, especially at wake-shaping speeds where wind and water are competing for your ears.\u003c\/p\u003e\n\u003cp\u003eThe low-profile design is the part boaters tend to appreciate most after the fact. It keeps the ETX enclosures tucked in close to the tube instead of standing them off on tall clamps. That matters when you've got a bimini folding down or board racks loaded up. Less bulk means fewer things fighting for the same space when the tower's full.\u003c\/p\u003e\n\u003cp\u003eA word on fitment, because it trips people up. This fixture is cut for the pre-2017 Nautique tower. Boats from 2017 on use a different clamp radius, so this set won't line up on a newer tower. If your boat is a 2017 or later, this isn't the one for you, and we'd rather tell you that now than have you wrestle it on the trailer.\u003c\/p\u003e\n\u003cp\u003eOut on the water, a couple of things are worth knowing. The clear anodized finish holds up well, but where the clamps grip the tower you may see a little white oxidation build up over a few seasons. That's cosmetic and normal for anodized aluminum against a polished tube. The included stainless hardware is corrosion-resistant, but stainless can still gall and seize after a season in saltwater, so a dab of anti-seize on the threads at install makes future service a lot easier. And because a tower sees constant vibration at speed, it's smart to check the bolts after your first few long runs. A little thread locker or a set of nylon locknuts keeps everything snug over the long haul.\u003c\/p\u003e\n\u003cp\u003eOne thing to be clear about: this is the fixture, not the speakers. You supply your own ETXv2 or ETXv3 enclosed tower speakers, and the M-MCPV3-NA gives them a clean, factory-style home on your Nautique tower. It ships as a set of two, one fixture for each speaker, with the stainless hardware in the box. Rig it right and it'll ride quiet and look sharp for years.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eFits the OEM tower position on Nautique boats built 2009 through 2016 for a true bolt-on install\u003c\/li\u003e\n  \u003cli\u003eMounts two ETXv2 or ETXv3 enclosed tower speakers per set, one fixture for each speaker\u003c\/li\u003e\n  \u003cli\u003eClear anodized aluminum construction stands up to sun and saltwater all season\u003c\/li\u003e\n  \u003cli\u003eIncludes stainless steel hardware for corrosion resistance right out of the box\u003c\/li\u003e\n  \u003cli\u003eLow-profile design keeps the speakers tucked close to the tube and clears biminis and board racks\u003c\/li\u003e\n  \u003cli\u003eClamps to the existing tower tube, so there's no drilling into your tower\u003c\/li\u003e\n  \u003cli\u003eSet of 2 fixtures ships complete and ready to rig two speakers\u003c\/li\u003e\n  \u003cli\u003eCarries both the older ETXv2 and current ETXv3 enclosures for easy future upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized JL Audio reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat speakers does the M-MCPV3-NA fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's designed to mount JL Audio's ETXv2 and ETXv3 enclosed tower speaker systems. The set carries two speakers, one fixture per speaker.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich boats and towers does it fit?\u003c\/summary\u003e\n    \u003cp\u003eThe OEM tower position on Nautique boats built from 2009 through 2016. It's matched to that tower geometry, so it lines up like a factory part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it fit a 2017 or newer Nautique?\u003c\/summary\u003e\n    \u003cp\u003eNo. Towers from 2017 on use a different clamp radius, so this fixture won't line up. It's specifically for the 2009 to 2016 tower.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I have to drill into my tower to install it?\u003c\/summary\u003e\n    \u003cp\u003eNo. The fixture clamps to the existing tower tube, so there's no drilling or fabrication. Just measure your tower tube diameter first to confirm the fit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat comes in the box?\u003c\/summary\u003e\n    \u003cp\u003eA set of two fixtures plus the stainless steel hardware to mount them. The speakers themselves are sold separately.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes this include the speakers?\u003c\/summary\u003e\n    \u003cp\u003eNo, this is the mounting fixture only. You supply your own ETXv2 or ETXv3 enclosed tower speakers.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many speakers can I mount with one set?\u003c\/summary\u003e\n    \u003cp\u003eTwo. Each set includes fixtures for a pair of ETX enclosures, one fixture per speaker.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's it made of and how does the finish hold up?\u003c\/summary\u003e\n    \u003cp\u003eAluminum with a clear anodized finish. It holds up well in sun and salt, though you may see light white oxidation over a few seasons where the clamps contact the tower. That's cosmetic and normal for anodized aluminum.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAny install tips for saltwater use?\u003c\/summary\u003e\n    \u003cp\u003eAdd a little anti-seize to the stainless hardware threads at install so they don't gall or seize down the road. Check the bolts after your first few long runs, since tower vibration can loosen them, and a bit of thread locker or nylon locknuts helps keep everything snug.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill the low-profile design clear my bimini and board racks?\u003c\/summary\u003e\n    \u003cp\u003eThat's the point of it. The low-profile fixtures keep the ETX enclosures close to the tube instead of standing them off on tall clamps, which leaves more room for a folding bimini or loaded board racks.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eJL Audio M-MCPV3-NA ETXv3 Speaker Fixture for Nautique Tower\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eJL Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e010-13713-00\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e699440912778\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eM-MCPV3-NA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eClear Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Speakers\u003c\/th\u003e\n\u003ctd\u003eETXv2 and ETXv3 Enclosed Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Position\u003c\/th\u003e\n\u003ctd\u003eOEM Nautique Tower\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTower Model Years\u003c\/th\u003e\n\u003ctd\u003e2009 to 2016\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHardware\u003c\/th\u003e\n\u003ctd\u003eStainless Steel, Included\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eLow-Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpeakers Per Set\u003c\/th\u003e\n\u003ctd\u003eTwo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What speakers does the M-MCPV3-NA fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's designed to mount JL Audio's ETXv2 and ETXv3 enclosed tower speaker systems. The set carries two speakers, one fixture per speaker.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which boats and towers does it fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The OEM tower position on Nautique boats built from 2009 through 2016. It's matched to that tower geometry, so it lines up like a factory part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it fit a 2017 or newer Nautique?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. Towers from 2017 on use a different clamp radius, so this fixture won't line up. It's specifically for the 2009 to 2016 tower.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I have to drill into my tower to install it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The fixture clamps to the existing tower tube, so there's no drilling or fabrication. Just measure your tower tube diameter first to confirm the fit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What comes in the box?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A set of two fixtures plus the stainless steel hardware to mount them. The speakers themselves are sold separately.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does this include the speakers?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, this is the mounting fixture only. You supply your own ETXv2 or ETXv3 enclosed tower speakers.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many speakers can I mount with one set?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Two. Each set includes fixtures for a pair of ETX enclosures, one fixture per speaker.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's it made of and how does the finish hold up?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Aluminum with a clear anodized finish. It holds up well in sun and salt, though you may see light white oxidation over a few seasons where the clamps contact the tower. That's cosmetic and normal for anodized aluminum.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Any install tips for saltwater use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Add a little anti-seize to the stainless hardware threads at install so they don't gall or seize down the road. Check the bolts after your first few long runs, since tower vibration can loosen them, and a bit of thread locker or nylon locknuts helps keep everything snug.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will the low-profile design clear my bimini and board racks?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"That's the point of it. The low-profile fixtures keep the ETX enclosures close to the tube instead of standing them off on tall clamps, which leaves more room for a folding bimini or loaded board racks.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45056473104477,"sku":"2008264","price":152.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_c3bc1fbc-641f-40e9-917e-8d8c6c2021d5.jpg?v=1789451822","url":"https:\/\/nvnmarine.com\/products\/jl-audio-m-mcpv3-na-etxv3-nautique-tower-fixture","provider":"NVN Marine","version":"1.0","type":"link"}