{"product_id":"hella-rallye-4000-euro-beam-driving-lamp-h1-position","title":"Hella Rallye 4000 Euro Beam Driving Lamp with Position Light","description":"\u003cp class=\"nvn-hero\"\u003eThe Hella Marine Rallye 4000 is a proven 8.7 inch round auxiliary driving lamp. This version runs an H1 halogen bulb behind a clear lens with a Euro spread beam, a built-in position lamp, and a black housing on a universal stud mount. Bolt it on, wire it up, and it just keeps working.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Hella Rallye 4000 is one of those auxiliary lamps you bolt on once and stop thinking about. This version is the 8.7 inch round Euro beam with an integrated position lamp, a clear lens, and a black housing. It runs a standard H1 halogen bulb, so when a filament finally gives up you can grab a replacement almost anywhere. It's sold as a single lamp, so if you want a matched pair up front you'll order two.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Euro beam version different from a long-throw spot is the pattern. Instead of a tight pencil that reaches way out into the dark, the Euro beam lays down a wide, even wash of light with a controlled cutoff up top. That's exactly what you want when you're lighting the foredeck, the water close around the hull, or the dock as you come in. It fills the near field instead of punching a hole in the distance. If you're running offshore and need to see a mile out, that's a different tool. This one's about seeing what's right in front of you, clearly, without a harsh glare bouncing back off the spray.\u003c\/p\u003e\n\u003cp\u003eThe integrated position lamp is a nice touch. It's a small, low-draw filament inside the same housing that gives you a soft marker glow without firing the full H1. Handy when you want presence at the dock or a bit of ambient light without loading the battery. Flip to the main beam when you actually need to see.\u003c\/p\u003e\n\u003cp\u003eMounting is a universal stud setup, so it drops into a single-hole install on a rail, a hardtop, an arch, or a fabricated bracket. One thing worth doing on a boat: if you're bolting to thin fiberglass or a hollow rail, back it with a plate or a big fender washer. These lamps have some mass, and a boat pounds in a chop. A backing plate spreads the load and keeps the gelcoat from stress-cracking around the stud after a couple of seasons.\u003c\/p\u003e\n\u003cp\u003eWiring is straightforward but worth doing right. Run the main beam through a relay so the switch at the helm only carries signal current, not the full lamp load, and put an inline fuse close to the battery. The position lamp gets its own low-current feed, and it's smart to keep that run clear of the hot H1 leads inside a tight console so nothing bakes against a neighboring harness over time. Good tinned marine wire, heat-shrink connectors, and a drip loop at the lamp keep water out of the connection, which is where most auxiliary lamps eventually fail.\u003c\/p\u003e\n\u003cp\u003eA few honest notes from folks who run these. The clear lens transmits a lot of light, which is the whole point, but it takes salt spray and grit like anything else up on a rail. A slip-on cover when the lamp is stowed keeps it clear and scratch-free. The black housing looks sharp, and an occasional wipe with a UV protectant keeps the finish from chalking under constant sun. And because an H1 halogen pulls real current, if you're wiring these alongside other lights on a small circuit, give them their own fused feed and relay so you're not tripping a breaker every time both come on.\u003c\/p\u003e\n\u003cp\u003eOn beam choice: the Euro spread pairs well with a boat that spends its nights maneuvering close to structure. Coming into an unfamiliar marina, working a mooring field, or lighting the swim platform, the wide pattern shows you the whole scene instead of a bright dot. If your running is mostly wide-open water at speed you'd lean toward a spot beam, but for the dock-and-anchor crowd this Euro pattern earns its keep.\u003c\/p\u003e\n\u003cp\u003eWho's it for? Boaters who want a proven, serviceable driving lamp for close-in work, cruisers adding foredeck light, or anyone replacing a tired auxiliary lamp on a rail or arch. The H1 bulb and the Rallye 4000 platform have been around a long time, which means spares are easy to find and the thing just keeps going. Fit and forget, the way Hella Marine builds them.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eH1 halogen bulb puts out a bright, warm-white beam and is easy to source and replace almost anywhere\u003c\/li\u003e\n  \u003cli\u003eRallye 4000 series: a proven 8.7 inch round auxiliary lamp platform\u003c\/li\u003e\n  \u003cli\u003eEuro beam pattern spreads a wide, even wash of light with a controlled top cutoff, ideal for close-in and foredeck lighting\u003c\/li\u003e\n  \u003cli\u003eIntegrated position lamp gives a low-draw marker glow when you don't need full output\u003c\/li\u003e\n  \u003cli\u003eClear lens for maximum light transmission\u003c\/li\u003e\n  \u003cli\u003eBlack housing hides salt and grime and takes a UV protectant well\u003c\/li\u003e\n  \u003cli\u003eUniversal stud mount drops into a single-hole install on rails, arches, hardtops, and brackets\u003c\/li\u003e\n  \u003cli\u003eSold as a single lamp, order two for a matched pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a complete lamp or just a replacement bulb?\u003c\/summary\u003e\n    \u003cp\u003eIt's a complete Rallye 4000 driving lamp. You get the housing, clear lens, integrated position lamp, universal stud mount, and an H1 halogen bulb, ready to wire and mount.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow big is it?\u003c\/summary\u003e\n    \u003cp\u003eIt's an 8.7 inch round lamp, one of the larger auxiliary sizes, so plan your rail or bracket space accordingly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is a Euro beam best for?\u003c\/summary\u003e\n    \u003cp\u003eThe Euro beam lays down a wide, even spread of light with a controlled cutoff up top rather than a narrow long-distance pencil. That makes it great for lighting the foredeck, the water close to the hull, and the dock. For reaching far out at speed you'd want a spot beam instead.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the position lamp do?\u003c\/summary\u003e\n    \u003cp\u003eIt's a small, low-draw filament inside the same housing that gives a soft marker glow without firing the full H1 bulb. It's handy for presence at the dock or ambient light without loading the battery.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat bulb does it use, and can I replace it myself?\u003c\/summary\u003e\n    \u003cp\u003eIt uses a standard H1 halogen bulb, which is a common, widely available size. Swapping one is a quick job, and it's smart to keep a spare on board.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount?\u003c\/summary\u003e\n    \u003cp\u003eIt uses a universal stud mount, so it drops into a single-hole install on a rail, hardtop, arch, or fabricated bracket. On thin fiberglass or a hollow rail, back the stud with a plate or a large fender washer to spread the load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow should I wire it?\u003c\/summary\u003e\n    \u003cp\u003eRun the main beam through a relay with an inline fuse near the battery so the helm switch only carries signal current. Give the position lamp its own low-current feed, use tinned marine wire and heat-shrink connectors, and add a drip loop at the lamp.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come as a pair?\u003c\/summary\u003e\n    \u003cp\u003eNo, this is a single lamp. If you want a matched set on the bow or arch, order two.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill the black housing hold up in the sun?\u003c\/summary\u003e\n    \u003cp\u003eThe black finish looks sharp and wears well, but like any dark surface it can chalk under constant UV. An occasional wipe with a UV protectant keeps it dark, and a slip-on cover protects the clear lens from salt spray when the lamp is stowed.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eHella Rallye 4000 Euro Beam Driving Lamp with Position Lamp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eH12560021\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e760687748076\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLamp Series\u003c\/th\u003e\n\u003ctd\u003eRallye 4000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBulb Type\u003c\/th\u003e\n\u003ctd\u003eH1 Halogen\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e8.7 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eEuro Beam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePosition Lamp\u003c\/th\u003e\n\u003ctd\u003eIntegrated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Color\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eUniversal Stud Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSingle Lamp\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a complete lamp or just a replacement bulb?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a complete Rallye 4000 driving lamp. You get the housing, clear lens, integrated position lamp, universal stud mount, and an H1 halogen bulb, ready to wire and mount.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How big is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's an 8.7 inch round lamp, one of the larger auxiliary sizes, so plan your rail or bracket space accordingly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is a Euro beam best for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The Euro beam lays down a wide, even spread of light with a controlled cutoff up top rather than a narrow long-distance pencil. That makes it great for lighting the foredeck, the water close to the hull, and the dock. For reaching far out at speed you'd want a spot beam instead.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the position lamp do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a small, low-draw filament inside the same housing that gives a soft marker glow without firing the full H1 bulb. It's handy for presence at the dock or ambient light without loading the battery.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What bulb does it use, and can I replace it myself?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It uses a standard H1 halogen bulb, which is a common, widely available size. Swapping one is a quick job, and it's smart to keep a spare on board.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It uses a universal stud mount, so it drops into a single-hole install on a rail, hardtop, arch, or fabricated bracket. On thin fiberglass or a hollow rail, back the stud with a plate or a large fender washer to spread the load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How should I wire it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Run the main beam through a relay with an inline fuse near the battery so the helm switch only carries signal current. Give the position lamp its own low-current feed, use tinned marine wire and heat-shrink connectors, and add a drip loop at the lamp.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come as a pair?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, this is a single lamp. If you want a matched set on the bow or arch, order two.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will the black housing hold up in the sun?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The black finish looks sharp and wears well, but like any dark surface it can chalk under constant UV. An occasional wipe with a UV protectant keeps it dark, and a slip-on cover protects the clear lens from salt spray when the lamp is stowed.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":45051828469853,"sku":"2008155","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_4e280fbb-e4d9-47b2-a0f1-e41929d69e50.jpg?v=1789404293","url":"https:\/\/nvnmarine.com\/products\/hella-rallye-4000-euro-beam-driving-lamp-h1-position","provider":"NVN Marine","version":"1.0","type":"link"}