{"product_id":"hella-pagid-355015551-front-brake-pads-land-rover","title":"Hella Pagid 355015551 Front Brake Pads, Land Rover","description":"\u003cp class=\"nvn-hero\"\u003eThe Hella Pagid 355015551 is a low-metallic front disc brake pad set built for Land Rover, and it ships with the brake caliper screws you need to finish the job. Hella Pagid pads come out of the same OE-focused engineering that supplies European automakers, so you get honest stopping power without guessing at quality. Verify the fitment against your VIN before you order.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you're chasing down a front brake job on a Land Rover, the Hella Pagid 355015551 is the pad set that gets you back on the road without a lot of fuss. It's a low-metallic front disc brake pad set, and it comes with the brake caliper screws in the box, so you're not hunting for hardware halfway through the install. Straightforward, honest, and built to an OE standard.\u003c\/p\u003e\n\u003cp\u003eHella Pagid is Hella's dedicated OE braking line, the same friction engineering that feeds a lot of European vehicle platforms from the factory. That matters on a Land Rover. These trucks are heavy, they carry gear, and they spend real time towing or crawling, so the brakes take a beating. A pad that's cut to OE spec means the friction level, the backing plate, and the fit all match what the caliper was designed around. No surprises when you clamp the wheel back on.\u003c\/p\u003e\n\u003cp\u003eThe friction compound here is low-metallic. In plain terms, that's a formula with a bit of steel and iron mixed into the pad material. It bites well when it's cold, holds up to heat when you're hauling a load down a grade, and it's a solid all-around street compound for a heavier vehicle. You'll feel a firm, predictable pedal once they're bedded in, which is exactly what you want on a truck this size. The trade-off is a touch more brake dust and a little more pad-to-rotor noise than a soft ceramic pad, which is normal for the type. If you want strong stopping bite on a truck that works, low-metallic earns its keep.\u003c\/p\u003e\n\u003cp\u003eThis is a front-axle pad set. On most vehicles the front brakes do the majority of the stopping, so front pads wear first and get replaced most often. The 355015551 crosses to a long list of Land Rover factory part numbers, including LR016962, LR021253, LR026220, LR032063, LR047859, LR051626, LR057725, and LR134700, among others. That said, Land Rover ran several brake packages across model years and trims, so don't guess. Match the set to your VIN before you buy. A quick VIN check with your dealer or parts supplier confirms you're getting the right pad for your exact truck.\u003c\/p\u003e\n\u003cp\u003eThe caliper screws in the box are a small thing that saves you a headache. When you pull a caliper to swap pads, the mounting hardware can be corroded or stretched, and reusing tired screws is how you end up with a caliper that shifts or a bolt that backs out. Fresh screws torqued to your Land Rover's spec keep everything square. Check your service manual for the exact torque value for your model, and don't eyeball it.\u003c\/p\u003e\n\u003cp\u003eInstalling these is a standard front brake job. Lift the truck, pull the wheel, unbolt the caliper, swap the pads, and reseat everything with the supplied screws. If your rotors are scored, grooved, or below their minimum thickness, replace or resurface them at the same time. New pads on a bad rotor never feel right and wear fast. Once everything's back together, bed the pads in before you lean on them. A series of moderate stops from around 30 to 15 mph, letting the brakes cool between them, transfers an even layer of pad material onto the rotor and sets you up for quiet, consistent braking.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone doing a front pad replacement on a compatible Land Rover who wants an OE-grade pad without paying dealer counter prices. It's a good pick for daily drivers, weekend haulers, and trucks that see real work. It's not the pick if you've got a dedicated track vehicle that needs a race compound, or if your VIN calls for a different brake package. When in doubt, verify the fitment first.\u003c\/p\u003e\n\u003cp\u003eWe ship these fast, and we stand behind the fit. Every set carries the full manufacturer warranty, so you're covered if anything's off. If you're not sure the 355015551 matches your Land Rover, send us your VIN and we'll confirm it before it goes out the door. Getting the right pad the first time beats a return and a second brake job.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eLow-metallic friction compound: strong cold bite and solid heat resistance for a heavier vehicle\u003c\/li\u003e\n  \u003cli\u003eFront axle disc brake pad set: replaces the pads that do most of your stopping and wear first\u003c\/li\u003e\n  \u003cli\u003eBrake caliper screws included: fresh mounting hardware in the box so the caliper seats square\u003c\/li\u003e\n  \u003cli\u003eOE-spec Hella Pagid engineering: friction level and fit matched to the factory caliper design\u003c\/li\u003e\n  \u003cli\u003eCrosses to Land Rover factory numbers LR016962, LR021253, LR026220 and more: broad OE replacement coverage\u003c\/li\u003e\n  \u003cli\u003eSet of 2 pads: complete the front pad swap in one purchase\u003c\/li\u003e\n  \u003cli\u003eMPN 355015551 (8DB 355 015-551): easy to cross-reference against your parts catalog\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Pagid reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat vehicles does the Hella Pagid 355015551 fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's a front brake pad set for Land Rover. It crosses to factory numbers like LR016962, LR021253, and LR026220, but Land Rover used several brake packages across trims and years, so confirm the fit against your VIN before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre these front or rear brake pads?\u003c\/summary\u003e\n    \u003cp\u003eFront. This set is for the front axle, where the brakes handle most of your stopping and the pads wear first.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat friction material are these pads?\u003c\/summary\u003e\n    \u003cp\u003eLow-metallic. That's a compound with some steel and iron content that bites well cold and holds up to heat, which suits a heavier vehicle that tows or carries a load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the set come with mounting hardware?\u003c\/summary\u003e\n    \u003cp\u003eYes. The brake caliper screws are included in the box, so you can seat the caliper with fresh hardware instead of reusing tired screws.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many pads are in the set?\u003c\/summary\u003e\n    \u003cp\u003eIt's a set of 2. Check your VIN-matched brake package to confirm the quantity your Land Rover needs for a complete front job.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat OE part numbers does this replace?\u003c\/summary\u003e\n    \u003cp\u003eThe 355015551 crosses to Land Rover numbers including LR016962, LR021253, LR026220, LR032063, LR047859, LR051626, LR057725, and LR134700, among others.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need to bed in the new pads?\u003c\/summary\u003e\n    \u003cp\u003eYes. Run a series of moderate stops from about 30 to 15 mph with cool-down time between them. That transfers an even layer of pad material to the rotor for quiet, consistent braking.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eShould I replace my rotors at the same time?\u003c\/summary\u003e\n    \u003cp\u003eIf the rotors are scored, grooved, or below their minimum thickness, replace or resurface them with the pads. New pads on a worn rotor never feel right and wear out faster.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill low-metallic pads make brake dust?\u003c\/summary\u003e\n    \u003cp\u003eA little more than a soft ceramic pad, yes. That's normal for the low-metallic type and it's the trade-off for stronger stopping bite.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I know this is the right pad for my truck?\u003c\/summary\u003e\n    \u003cp\u003eMatch the 355015551 to your VIN. If you're not sure, send us your VIN and we'll confirm the fit before we ship.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eHella Pagid Low-Metallic Front Disc Brake Pad Set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Pagid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e355015551\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e4082300359862\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAlternate Part Number\u003c\/th\u003e\n\u003ctd\u003e8DB 355 015-551\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFriction Material\u003c\/th\u003e\n\u003ctd\u003eLow-Metallic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAxle Position\u003c\/th\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Hardware\u003c\/th\u003e\n\u003ctd\u003eBrake caliper screws\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVehicle Make\u003c\/th\u003e\n\u003ctd\u003eLand Rover\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eDisc Brake Pad Set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOE Cross-Reference\u003c\/th\u003e\n\u003ctd\u003eLR016962, LR021253, LR026220, LR032063, LR047859, LR051626, LR057725, LR134700\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFitment Verification\u003c\/th\u003e\n\u003ctd\u003eConfirm by VIN\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What vehicles does the Hella Pagid 355015551 fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a front brake pad set for Land Rover. It crosses to factory numbers like LR016962, LR021253, and LR026220, but Land Rover used several brake packages across trims and years, so confirm the fit against your VIN before ordering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are these front or rear brake pads?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Front. This set is for the front axle, where the brakes handle most of your stopping and the pads wear first.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What friction material are these pads?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Low-metallic. That's a compound with some steel and iron content that bites well cold and holds up to heat, which suits a heavier vehicle that tows or carries a load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the set come with mounting hardware?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The brake caliper screws are included in the box, so you can seat the caliper with fresh hardware instead of reusing tired screws.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many pads are in the set?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a set of 2. Check your VIN-matched brake package to confirm the quantity your Land Rover needs for a complete front job.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What OE part numbers does this replace?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The 355015551 crosses to Land Rover numbers including LR016962, LR021253, LR026220, LR032063, LR047859, LR051626, LR057725, and LR134700, among others.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need to bed in the new pads?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Run a series of moderate stops from about 30 to 15 mph with cool-down time between them. That transfers an even layer of pad material to the rotor for quiet, consistent braking.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Should I replace my rotors at the same time?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"If the rotors are scored, grooved, or below their minimum thickness, replace or resurface them with the pads. New pads on a worn rotor never feel right and wear out faster.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will low-metallic pads make brake dust?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A little more than a soft ceramic pad, yes. That's normal for the low-metallic type and it's the trade-off for stronger stopping bite.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I know this is the right pad for my truck?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Match the 355015551 to your VIN. If you're not sure, send us your VIN and we'll confirm the fit before we ship.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Pagid","offers":[{"title":"Default Title","offer_id":45061857476701,"sku":"2008613","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_e07c9fc9-d593-4b62-ad04-05baa1b392ac.jpg?v=1789563380","url":"https:\/\/nvnmarine.com\/products\/hella-pagid-355015551-front-brake-pads-land-rover","provider":"NVN Marine","version":"1.0","type":"link"}