{"product_id":"hella-pagid-355012541-bmw-x5-x6-front-brake-pads","title":"Hella Pagid 355012541 BMW X5 X6 Front Brake Pads","description":"\u003cp class=\"nvn-hero\"\u003eThe Hella Pagid 355012541 is a low-metallic front brake pad set for the BMW X5, X6, and X4 M40i. It carries OE number 34116852253, seats in the factory front calipers, and covers one axle. Strong, consistent bite on a heavy SUV, engineered in Germany to BMW's own front braking spec.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThese are the Hella Pagid 355012541 front disc brake pads, a low-metallic set built for the BMW X5, X6, and X4 M40i. They carry OE number 34116852253, so they seat in the same front calipers BMW specified at the factory. One set covers the front axle, both wheels, and the compound is matched to how these heavier SUVs actually load their brakes.\u003c\/p\u003e\n\u003cp\u003eLow-metallic means the friction material is blended with steel and other metal fibers. That mix gives you strong, predictable bite from cold and holds its stopping power when the pads get hot on a long downhill or a run of quick stops. The trade-off is honest. You'll see a little more brake dust on the wheels and hear a touch more noise than you would from a pure ceramic pad. That's the nature of a low-metallic compound, and it's what BMW's braking package was tuned around in the first place.\u003c\/p\u003e\n\u003cp\u003eWeight matters with brakes. The X5 and X6 are big vehicles, and when you add passengers, cargo, or a loaded roof, the front brakes do most of the work of pulling all that mass down. A low-metallic pad earns its keep here because it stays consistent as heat builds. You get the same pedal feel on the tenth stop that you had on the first, which is exactly what you want on a long grade or in stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eFitment covers the front axle on the X5 in 3.0si, 4.8i, xDrive30i, xDrive35d, xDrive35i, xDrive40e, and sDrive35i trims, the X6 in xDrive35i and sDrive35i, and the X4 M40i. That spans roughly the 2007 to 2019 model years. One thing worth flagging before you order. BMW ran more than one front brake package across these platforms, and the caliper size can change with the VIN. Check your current front pad or your VIN against this part number so you get the right size the first time.\u003c\/p\u003e\n\u003cp\u003eThis set is prepared for a wear indicator, but the sensor itself isn't in the box. If your old sensor is still intact, you can reuse it. If it tripped or got damaged during the last pad change, order a replacement separately. The compatible Hella sensors are 355250841 and 355251831, and you match them to your specific application.\u003c\/p\u003e\n\u003cp\u003eInstalling them is a standard front brake job. Pull the wheel, unbolt the caliper, and compress the pistons before you swap the pads. Take a minute to inspect the anti-rattle hardware and the slide pins. Worn clips and dry pins are what cause noise and uneven wear, so replace tired hardware and lube the pins with a high-temp brake grease. A separate accessory pack, part 355201431, covers the clips and shims if you want fresh ones.\u003c\/p\u003e\n\u003cp\u003eLook after the rotors while you're in there. If the old pads were worn to the backing or the rotors show deep grooves or a lip at the edge, plan on turning or replacing them at the same time. New pads on tired rotors won't seat evenly, and you'll give up braking performance and pad life. Fresh pads on clean, true rotors is how you get the full service life out of this set.\u003c\/p\u003e\n\u003cp\u003eOnce they're in, bed them in properly. Do a series of moderate stops from moderate speed and let the brakes cool between them. That transfers an even layer of friction material onto the rotor and keeps the pads from glazing early. Skip that step and you'll chase noise and soft initial bite for weeks.\u003c\/p\u003e\n\u003cp\u003eWho's this set for? An X5, X6, or X4 owner who wants to keep the truck on OE-spec braking without guessing at a friction level. It isn't the quietest, lowest-dust pad you can buy, and we won't pretend otherwise. What it is, is a German-engineered, OE-formulated pad that stops a heavy vehicle the way the factory intended, set after set.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eLow-metallic friction compound delivers strong, consistent bite on heavy BMW SUVs, even under repeated hard stops.\u003c\/li\u003e\n  \u003cli\u003eOE number 34116852253 matches BMW's factory front brake package for a direct fit.\u003c\/li\u003e\n  \u003cli\u003eCovers the front axle, both wheels, in one set of 2 pads.\u003c\/li\u003e\n  \u003cli\u003eFits BMW X5 (E70), X6, and X4 M40i front calipers.\u003c\/li\u003e\n  \u003cli\u003eOE-formulated friction material designed and engineered in Germany.\u003c\/li\u003e\n  \u003cli\u003ePrepared for a wear indicator so a compatible sensor clips in when you need one.\u003c\/li\u003e\n  \u003cli\u003eShaped to the factory pad backing plate for correct caliper seating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Pagid reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat vehicles does the Hella Pagid 355012541 set fit?\u003c\/summary\u003e\n    \u003cp\u003eIt fits the front axle on the BMW X5 (E70), X6, and X4 M40i, roughly the 2007 to 2019 model years. BMW ran more than one front brake package across these platforms, so check your current front pad or your VIN against this part number before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre these front or rear brake pads?\u003c\/summary\u003e\n    \u003cp\u003eFront axle only. The set of 2 covers both front wheels. For all four corners you'd need a matching rear set as well.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does low-metallic mean?\u003c\/summary\u003e\n    \u003cp\u003eThe friction material is blended with steel and other metal fibers. That gives you strong bite from cold and steady stopping power as the pads heat up. The trade-off is a little more brake dust and noise than a pure ceramic pad.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the set include a wear sensor?\u003c\/summary\u003e\n    \u003cp\u003eNo. The pads are prepared for a wear indicator, but the sensor isn't in the box. Reuse your old sensor if it's intact, or order a compatible Hella sensor (355250841 or 355251831) separately to match your application.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many pads come in the set?\u003c\/summary\u003e\n    \u003cp\u003eTwo pads, enough for one front axle. This is a single-axle set, so plan a separate rear set if you're doing all four wheels.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre these an OE-quality pad?\u003c\/summary\u003e\n    \u003cp\u003eYes. They use OE-formulated friction material carrying OE number 34116852253, engineered in Germany to match BMW's front braking spec.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need to bed in new pads?\u003c\/summary\u003e\n    \u003cp\u003eYes. Do a series of moderate stops from moderate speed and let the brakes cool between them before any hard braking. That transfers an even layer of friction material and keeps the pads from glazing early.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eShould I replace hardware when I install these?\u003c\/summary\u003e\n    \u003cp\u003eInspect the anti-rattle clips and slide pins. Replace worn hardware and lube the pins with high-temp brake grease so the pads move freely. A separate accessory pack, part 355201431, covers the clips and shims.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eHella Pagid 355012541 Front Disc Brake Pad Set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Pagid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e355012541\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e4082300356854\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOE Number\u003c\/th\u003e\n\u003ctd\u003e34116852253\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eDisc Brake Pad Set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFriction Material\u003c\/th\u003e\n\u003ctd\u003eLow-Metallic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 2 (one axle)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWear Sensor\u003c\/th\u003e\n\u003ctd\u003eNot included; prepared for wear indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Wear Sensors\u003c\/th\u003e\n\u003ctd\u003e355250841 \/ 355251831 (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAccessory Pack\u003c\/th\u003e\n\u003ctd\u003e355201431 (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVehicle Make\u003c\/th\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits Models\u003c\/th\u003e\n\u003ctd\u003eX5 (E70), X6, X4 M40i\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDesigned \u0026amp; Engineered\u003c\/th\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What vehicles does the Hella Pagid 355012541 set fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It fits the front axle on the BMW X5 (E70), X6, and X4 M40i, roughly the 2007 to 2019 model years. BMW ran more than one front brake package across these platforms, so check your current front pad or your VIN against this part number before ordering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are these front or rear brake pads?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Front axle only. The set of 2 covers both front wheels. For all four corners you'd need a matching rear set as well.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does low-metallic mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The friction material is blended with steel and other metal fibers. That gives you strong bite from cold and steady stopping power as the pads heat up. The trade-off is a little more brake dust and noise than a pure ceramic pad.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the set include a wear sensor?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The pads are prepared for a wear indicator, but the sensor isn't in the box. Reuse your old sensor if it's intact, or order a compatible Hella sensor (355250841 or 355251831) separately to match your application.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many pads come in the set?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Two pads, enough for one front axle. This is a single-axle set, so plan a separate rear set if you're doing all four wheels.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are these an OE-quality pad?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. They use OE-formulated friction material carrying OE number 34116852253, engineered in Germany to match BMW's front braking spec.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need to bed in new pads?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Do a series of moderate stops from moderate speed and let the brakes cool between them before any hard braking. That transfers an even layer of friction material and keeps the pads from glazing early.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Should I replace hardware when I install these?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Inspect the anti-rattle clips and slide pins. Replace worn hardware and lube the pins with high-temp brake grease so the pads move freely. A separate accessory pack, part 355201431, covers the clips and shims.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Pagid","offers":[{"title":"Default Title","offer_id":45066150150237,"sku":"2008842","price":53.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_83861642-a8f2-4d77-88c2-09a4a23ad702.jpg?v=1789631389","url":"https:\/\/nvnmarine.com\/products\/hella-pagid-355012541-bmw-x5-x6-front-brake-pads","provider":"NVN Marine","version":"1.0","type":"link"}