{"product_id":"hella-marine-xt-3s-led-spot-beam-cube-light-set-of-2","title":"Hella Marine X-Treme XT-3S LED Spot Beam Cube Light, Set of 2","description":"\u003cp class=\"nvn-hero\"\u003eHella Marine's X-Treme XT-3S spot beam cube lights ship as a matched set of two. Each compact cube runs 28 LEDs at 5700 lumens with a tight spot beam, a black aluminum body, and 12 to 24 volt input. It's serious distance lighting for the helm, the arch, or a utility rig.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThese are Hella Marine's X-Treme XT-3S spot beam cube lights, and they ship as a matched set of two. Each one is a compact 3.3 by 3.58 inch cube packed with 28 LEDs pushing 5700 lumens, so a pair throws a serious wall of light down the water or the trail. Hella built the X-Treme line to be mounted and forgotten, and that's exactly how these behave once they're wired in right.\u003c\/p\u003e\n\u003cp\u003eThe XT-3S runs a spot beam pattern. That means tight, focused throw. If you're trying to pick out a channel marker, a crab pot, or a dock piling at distance, this is the pattern you want. Spot beams reach far but they don't spread wide, so don't expect these to flood the whole cockpit with soft light. A lot of owners run a pair of spots up high for distance and add a wider flood down low for close work on deck. If you only run the spots, aim them slightly apart so the two beams overlap out ahead of the bow instead of stacking into one hot column.\u003c\/p\u003e\n\u003cp\u003eBuild quality is where the X-Treme name earns its keep. The housing is black aluminum, which sheds heat and stands up to salt spray far better than a plastic-bodied light. The lens is clear polycarbonate, tough enough to take a knock without shattering. Each light comes with a smoked stone shield cover, and those are worth understanding. The shields snap over the lens to protect it from stone chips, canvas rub, and UV while the light isn't in use. They also knock down output noticeably, so pull them off before a night run. Left on, they'll haze over time and cut your throw.\u003c\/p\u003e\n\u003cp\u003ePower is flexible. Each light accepts 12 to 24 volt DC, so it drops onto a standard 12V boat or a 24V system without a converter. At 12 volts each light pulls right around 5 amps, so budget about 10 amps for the pair and fuse them accordingly. On any run longer than a few feet, step up to 10 gauge tinned marine wire to keep voltage drop from dimming them. Tinned wire matters out here. Bare copper corrodes green inside the jacket within a season or two of salt air.\u003c\/p\u003e\n\u003cp\u003eMounting is upright bracket style, and the set includes two brackets with hardware plus a sheet of instructions. On a hardtop, T-top, or radar arch the brackets bolt straight up. If you're going through fiberglass, back the bolts with a plate or a big fender washer so vibration doesn't crack the gelcoat over time. And if you're bolting the aluminum housing to an aluminum rail, put a little dielectric grease at the contact points to stop the two metals from corroding against each other. Small step, saves you a seized bracket down the road.\u003c\/p\u003e\n\u003cp\u003eWhere do these shine? Offshore boats running home after dark, center consoles that need reach past the bow, sportfishers lighting a spread, and hardtops that want clean distance lighting without a big bulky bar. Because they take 12 to 24 volts and carry a sealed aluminum body, plenty of folks also run them on trucks, UTVs, and utility rigs as driving or work lights. Same light, same mount, just a different vehicle. What they're not is a soft area flood. If you want gentle, even cockpit light for cleaning fish or rigging lines, pair these spots with a dedicated flood rather than leaning on them alone.\u003c\/p\u003e\n\u003cp\u003eYou're getting two complete lights, two brackets and hardware, two smoked stone shields, and the mounting instructions in the box. Wire them up, aim them, and they'll do their job for a long time. That's the whole point of the X-Treme line.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e28 high-output LEDs per light delivering 5700 lumens each, so a pair lights up serious distance offshore or on the trail.\u003c\/li\u003e\n  \u003cli\u003eSpot beam pattern for tight, focused throw, ideal for spotting channel markers, pilings, and hazards at range.\u003c\/li\u003e\n  \u003cli\u003eWide 12 to 24 volt DC input drops onto 12V boats and 24V systems alike with no converter needed.\u003c\/li\u003e\n  \u003cli\u003eBlack aluminum housing sheds heat and shrugs off salt spray far better than a plastic-bodied light.\u003c\/li\u003e\n  \u003cli\u003eClear polycarbonate lens takes a knock without shattering.\u003c\/li\u003e\n  \u003cli\u003eTwo smoked stone shield covers included to protect the lenses from chips and UV when the lights are off.\u003c\/li\u003e\n  \u003cli\u003eCompact 3.3 by 3.58 inch cube form factor mounts clean on a hardtop, T-top, or radar arch without a bulky bar.\u003c\/li\u003e\n  \u003cli\u003eUpright mounting brackets and hardware included for both lights, ready to bolt up.\u003c\/li\u003e\n  \u003cli\u003eDraws about 5 amps per light at 12V, roughly 10 amps for the pair, easy to fuse and wire.\u003c\/li\u003e\n  \u003cli\u003eSold as a matched set of two, everything you need for a balanced pair install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a spot beam or a flood?\u003c\/summary\u003e\n    \u003cp\u003eIt's a spot beam. That gives you tight, focused throw for distance, like picking out a channel marker or a piling well ahead of the bow. It won't spread wide across the deck, so if you want soft area light for close work, pair these with a dedicated flood.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many lights come in the set?\u003c\/summary\u003e\n    \u003cp\u003eTwo complete lights. The box includes both lights, two upright mounting brackets with hardware, two smoked stone shield covers, and mounting instructions.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill these run on a 24 volt boat?\u003c\/summary\u003e\n    \u003cp\u003eYes. Each light accepts 12 to 24 volt DC, so it works on a standard 12V system or a 24V system with no converter needed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much current does the pair draw?\u003c\/summary\u003e\n    \u003cp\u003eEach light pulls right around 5 amps at 12 volts, so budget about 10 amps for the pair and fuse the circuit accordingly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the smoked stone shield covers for?\u003c\/summary\u003e\n    \u003cp\u003eThey snap over the lens to protect it from stone chips, canvas rub, and UV while the light isn't in use. They do cut output noticeably, so pull them off before a night run.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the housing and lens made of?\u003c\/summary\u003e\n    \u003cp\u003eThe housing is black aluminum, which sheds heat and handles salt spray well. The lens is clear polycarbonate, tough enough to take a knock without shattering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow big is each light?\u003c\/summary\u003e\n    \u003cp\u003eEach one is a compact cube measuring 3.3 by 3.58 inches, small enough to mount clean without a bulky bar.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I run these on a truck or UTV?\u003c\/summary\u003e\n    \u003cp\u003eYes. With 12 to 24 volt input and a sealed aluminum body, plenty of owners run them on trucks, UTVs, and utility rigs as driving or work lights. Same light, same mount, just a different vehicle.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat wire size should I use on a long run?\u003c\/summary\u003e\n    \u003cp\u003eStep up to 10 gauge tinned marine wire on any run longer than a few feet. That keeps voltage drop from dimming the lights, and tinned wire resists the corrosion that bare copper gets in salt air.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I mount these on a fiberglass hardtop?\u003c\/summary\u003e\n    \u003cp\u003eYes. Back the mounting bolts with a plate or a large fender washer so vibration doesn't crack the gelcoat over time, and use dielectric grease at any aluminum-to-aluminum contact points.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eLED Bulb; 28 LED Bulbs; 3.3 X 3.58 Inch Cube; 60 Watt; 12 To 24 Volt DC; Spot Beam; 5700 Lumens; Clear Polycarbonate Lens; Black Aluminum Housing; Upright Mount; Set Of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e358233841\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e760687183969\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eX-Treme Spotlight XT-3S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eSpot Beam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Count\u003c\/th\u003e\n\u003ctd\u003e28 LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e60 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e12 to 24 Volt DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Output\u003c\/th\u003e\n\u003ctd\u003e5700 Lumens (per light)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens\u003c\/th\u003e\n\u003ctd\u003eClear Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eBlack Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e3.3 x 3.58 Inch Cube\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eUpright Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApprox. Current Draw\u003c\/th\u003e\n\u003ctd\u003e5A per light at 12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded in Box\u003c\/th\u003e\n\u003ctd\u003eTwo mounting brackets with hardware, two smoked stone shield covers, mounting instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a spot beam or a flood?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a spot beam. That gives you tight, focused throw for distance, like picking out a channel marker or a piling well ahead of the bow. It won't spread wide across the deck, so if you want soft area light for close work, pair these with a dedicated flood.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many lights come in the set?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Two complete lights. The box includes both lights, two upright mounting brackets with hardware, two smoked stone shield covers, and mounting instructions.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will these run on a 24 volt boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Each light accepts 12 to 24 volt DC, so it works on a standard 12V system or a 24V system with no converter needed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much current does the pair draw?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Each light pulls right around 5 amps at 12 volts, so budget about 10 amps for the pair and fuse the circuit accordingly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the smoked stone shield covers for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"They snap over the lens to protect it from stone chips, canvas rub, and UV while the light isn't in use. They do cut output noticeably, so pull them off before a night run.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the housing and lens made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The housing is black aluminum, which sheds heat and handles salt spray well. The lens is clear polycarbonate, tough enough to take a knock without shattering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How big is each light?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Each one is a compact cube measuring 3.3 by 3.58 inches, small enough to mount clean without a bulky bar.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I run these on a truck or UTV?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. With 12 to 24 volt input and a sealed aluminum body, plenty of owners run them on trucks, UTVs, and utility rigs as driving or work lights. Same light, same mount, just a different vehicle.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What wire size should I use on a long run?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Step up to 10 gauge tinned marine wire on any run longer than a few feet. That keeps voltage drop from dimming the lights, and tinned wire resists the corrosion that bare copper gets in salt air.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I mount these on a fiberglass hardtop?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Back the mounting bolts with a plate or a large fender washer so vibration doesn't crack the gelcoat over time, and use dielectric grease at any aluminum-to-aluminum contact points.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":45000379498589,"sku":"2007875","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_babf8154-d2a6-4cb4-855f-f64f37cd3e6b.jpg?v=1788740553","url":"https:\/\/nvnmarine.com\/products\/hella-marine-xt-3s-led-spot-beam-cube-light-set-of-2","provider":"NVN Marine","version":"1.0","type":"link"}