{"product_id":"hella-marine-h61922001-amber-led-rocker-switch","title":"Hella Marine H61922001 Amber LED Rocker Switch","description":"\u003cp class=\"nvn-hero\"\u003eThe Hella Marine H61922001 is a sealed on-off rocker switch with an amber LED that glows when the circuit's live. Rated 12V and 20 amps, it handles most accessory loads on a boat, from spreader lights to a livewell pump. Clean amber backlight, marine-grade build, and Hella's fit-and-forget reliability at the helm.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Hella Marine H61922001 is a straightforward, sealed on-off rocker switch with a built-in amber LED. Flip it up, the circuit goes live, and the amber lens glows so you can see at a glance what's running. That's the whole job, and it does it well. On a boat, a switch that quietly corrodes and fails two seasons in is a real headache. This is the kind of part Hella Marine built its name on, the fit-and-forget gear that just keeps working.\u003c\/p\u003e\n\u003cp\u003eIt's rated for 12 volts and up to 20 amps. That covers most of the accessory loads you'll wire on a small to mid-size boat: nav lights, spreader lights, a livewell pump, a washdown pump, a stereo, courtesy lighting, a bait aerator. If a circuit pulls more than 20 amps continuous, step up to a heavier switch or run a relay off this one. For the everyday helm and dash stuff, though, 20 amps is plenty of headroom.\u003c\/p\u003e\n\u003cp\u003eThe switching is SPST, single pole single throw, which is the simple on-off you want for a single accessory circuit. No middle position, no second load. Up is on, down is off. The amber LED is the nice touch here. In a bank of switches at the helm, color-coding by function makes life easier in the dark. Run amber for one group of accessories, and you'll know exactly what's on without squinting at a label.\u003c\/p\u003e\n\u003cp\u003eWiring an illuminated rocker like this is simple, but worth doing right. These typically use three blade terminals: battery positive in, the load out to your accessory, and a ground for the LED so the light comes on when the switch is live. Use marine-grade tinned wire, crimp on heat-shrink terminals, and protect the circuit with a fuse or breaker sized to the wire and load. Don't skip the fuse. A 20-amp switch in an unfused circuit is still an unfused circuit.\u003c\/p\u003e\n\u003cp\u003eOne thing to be clear about: this one ships without the safety cover. If you want the flip-up guard that keeps a knee or a stray line from bumping the switch on, that's a separate part. For most helm and dash locations the bare switch is fine. But if you're mounting it somewhere it could get knocked, like a low panel near the cockpit sole, the cover is worth adding. We'd rather tell you up front than have you surprised when it shows up without one.\u003c\/p\u003e\n\u003cp\u003eMounting is panel-style. You cut a rectangular opening in your dash or switch panel, drop the switch in, and it snaps home. Give some thought to where your hand naturally lands, and keep the whole switch bank together so it reads cleanly. Behind the panel, leave enough slack in the harness to pull the switch forward if you ever need to service a terminal.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anybody rigging or refitting a switch panel who wants a clean, illuminated on-off that'll hold up to salt air and spray. It suits center consoles, bay boats, pontoons, sailboats, and small cruisers alike. It isn't a heavy-duty industrial switch and it isn't meant for enormous loads, but for the accessories most boaters actually run, it's exactly the right piece. And because it's Hella Marine, you're getting a part engineered for the water, not a generic switch repurposed for the dash.\u003c\/p\u003e\n\u003cp\u003eIf you're building out a full switch panel, think about the whole set at once. Matching switch styles and using LED color to group functions gives you a helm that looks factory and reads instantly, even at 2 AM offshore. Wire it clean, fuse it right, and this little amber switch will outlast a lot of the gear it controls.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSPST on-off switching for simple, single-circuit accessory control\u003c\/li\u003e\n  \u003cli\u003e12 volt rating matched to standard marine DC electrical systems\u003c\/li\u003e\n  \u003cli\u003e20 amp maximum current handles most helm and dash accessory loads\u003c\/li\u003e\n  \u003cli\u003eBuilt-in amber LED glows when the circuit is live for at-a-glance status\u003c\/li\u003e\n  \u003cli\u003eRocker-style actuation, easy to operate with gloves or wet hands\u003c\/li\u003e\n  \u003cli\u003ePanel-mount design drops into a standard switch bank\u003c\/li\u003e\n  \u003cli\u003eMarine-grade construction from Hella Marine, engineered for salt air and spray\u003c\/li\u003e\n  \u003cli\u003eAmber lens lets you color-code switch functions across a panel\u003c\/li\u003e\n  \u003cli\u003eShips without safety cover, so you add the guard only where you need it\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhen does the amber LED light up?\u003c\/summary\u003e\n    \u003cp\u003eWhen the switch is on and the circuit is live. Wire the LED ground and the amber lens glows any time the accessory is running, so you can tell at a glance what's on at the helm.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this switch made for the marine environment?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's a Hella Marine part, engineered for salt air and spray rather than a generic switch repurposed for a boat. We don't have a published waterproof rating to quote, so if it'll take direct water, mount it so the panel protects the back of the switch.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with the safety cover?\u003c\/summary\u003e\n    \u003cp\u003eNo. This version ships without the safety cover. If you want the flip-up guard to prevent accidental switching, that is a separate part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the electrical rating?\u003c\/summary\u003e\n    \u003cp\u003eIt is 12 volts and 20 amps maximum. Keep your continuous load under 20 amps and fuse the circuit to match the wire and the load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does SPST mean for wiring?\u003c\/summary\u003e\n    \u003cp\u003eSingle pole, single throw. It is a basic on-off for one circuit. Up is on, down is off. No second load and no center position.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I wire the LED?\u003c\/summary\u003e\n    \u003cp\u003eIlluminated rockers like this typically use three blade terminals: battery positive in, load out, and a ground for the LED. Check the terminal markings on your switch and wire accordingly so the amber light comes on with the circuit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it on a 24-volt system?\u003c\/summary\u003e\n    \u003cp\u003eIt's rated 12 volts, so it's meant for 12V DC systems. On a 24V boat, use a switch rated for 24V or the LED and the rating won't behave as intended.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat can I run through it?\u003c\/summary\u003e\n    \u003cp\u003eMost standard accessories: nav lights, spreader lights, livewell and washdown pumps, courtesy lighting, a stereo. Anything drawing under 20 amps continuous. For bigger loads, use it to switch a relay instead of the load directly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount?\u003c\/summary\u003e\n    \u003cp\u003eIt's a panel-mount rocker. Cut the rectangular opening in your dash or switch panel and the switch drops in. Leave some harness slack behind the panel so you can service a terminal later.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eHella Marine SPST Amber LED Rocker Switch, 12V 20A On-Off\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eH61922001\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e760687805908\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSwitch Type\u003c\/th\u003e\n\u003ctd\u003eRocker Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCircuit Configuration\u003c\/th\u003e\n\u003ctd\u003eSPST (Single Pole, Single Throw)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSwitch Function\u003c\/th\u003e\n\u003ctd\u003eOn-Off\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating Voltage\u003c\/th\u003e\n\u003ctd\u003e12 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Current\u003c\/th\u003e\n\u003ctd\u003e20 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIllumination\u003c\/th\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Color\u003c\/th\u003e\n\u003ctd\u003eAmber\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSafety Cover\u003c\/th\u003e\n\u003ctd\u003eSold separately (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"When does the amber LED light up?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"When the switch is on and the circuit is live. Wire the LED ground and the amber lens glows any time the accessory is running, so you can tell at a glance what's on at the helm.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this switch made for the marine environment?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's a Hella Marine part, engineered for salt air and spray rather than a generic switch repurposed for a boat. We don't have a published waterproof rating to quote, so if it'll take direct water, mount it so the panel protects the back of the switch.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with the safety cover?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This version ships without the safety cover. If you want the flip-up guard to prevent accidental switching, that is a separate part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the electrical rating?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It is 12 volts and 20 amps maximum. Keep your continuous load under 20 amps and fuse the circuit to match the wire and the load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does SPST mean for wiring?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Single pole, single throw. It is a basic on-off for one circuit. Up is on, down is off. No second load and no center position.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I wire the LED?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Illuminated rockers like this typically use three blade terminals: battery positive in, load out, and a ground for the LED. Check the terminal markings on your switch and wire accordingly so the amber light comes on with the circuit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it on a 24-volt system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's rated 12 volts, so it's meant for 12V DC systems. On a 24V boat, use a switch rated for 24V or the LED and the rating won't behave as intended.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What can I run through it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Most standard accessories: nav lights, spreader lights, livewell and washdown pumps, courtesy lighting, a stereo. Anything drawing under 20 amps continuous. For bigger loads, use it to switch a relay instead of the load directly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a panel-mount rocker. Cut the rectangular opening in your dash or switch panel and the switch drops in. Leave some harness slack behind the panel so you can service a terminal later.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":45097825435741,"sku":"2010966","price":9.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_3b02de62-8d56-44f7-b426-4b1d46bc1549.jpg?v=1790346956","url":"https:\/\/nvnmarine.com\/products\/hella-marine-h61922001-amber-led-rocker-switch","provider":"NVN Marine","version":"1.0","type":"link"}