{"product_id":"hella-marine-h1-55w-12v-halogen-bulb-clear-dot-sae","title":"Hella Marine H1 55W 12V Halogen Bulb, Clear, DOT\/SAE","description":"\u003cp class=\"nvn-hero\"\u003eThe Hella Marine H1 is a 55-watt, 12-volt single-filament halogen bulb with a clear beam and a P14.5s base. It's a direct replacement for fog, driving, spot, and high-beam lamps that take an H1, and it's DOT\/SAE compliant for street-legal use. One bulb per pack.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Hella H1 is a single-filament halogen bulb rated at 55 watts on a 12-volt system, and it's one of the most common bulbs in marine and automotive auxiliary lighting. If you run fog lamps, driving lamps, spot lamps, or a high-beam headlamp that takes an H1, this is the replacement that drops straight in. One bulb per blister, clear beam, nothing fancy. Just a reliable, DOT\/SAE-compliant halogen that does its job.\u003c\/p\u003e\n\u003cp\u003eH1 refers to the bulb's shape and base, not the brand. It uses a P14.5s base, which is a single-tab fitting that seats into the lamp housing and locks with a retaining clip or wire spring, depending on the fixture. The glass capsule is a compact T2.5 quartz envelope. Inside, a single transverse filament runs across the beam axis, which is why H1 bulbs are so popular in reflector and projector optics that are tuned around a known filament position. Swap in an H1 that's built to spec and the beam lands where the lamp designer intended.\u003c\/p\u003e\n\u003cp\u003eWhere do you actually use one? Plenty of places. On the water, H1 bulbs show up in spreader lights, deck floods, and spotlight housings. On a trailer or tow vehicle, they're common in driving and fog lamps. Off-road and utility lights lean on the H1 too. Because it's a 12-volt, 55-watt bulb, it draws roughly 4.6 amps when it's lit, so size your wiring and fuses accordingly if you're building a circuit from scratch. For a single replacement in an existing lamp, you don't need to think about any of that. You're just putting the light back the way it was.\u003c\/p\u003e\n\u003cp\u003eThe beam color is clear, meaning standard warm-white halogen light with no coating or tint. That's the color most fog and driving optics are designed around, and it cuts through spray and haze better than you'd expect for a bulb this inexpensive. If your old bulb has gone dim, yellowed, or died outright, a fresh H1 brings the output right back.\u003c\/p\u003e\n\u003cp\u003eOne handling note that matters more than people think. Don't touch the glass with bare fingers. The oils from your skin create hot spots on the quartz envelope once the bulb heats up, and that shortens its life or cracks the glass early. Handle it by the metal base, or use a clean cloth or the blister it ships in. If you do touch the glass, wipe it down with rubbing alcohol before you power it up. Small habit, big difference in how long the bulb lasts.\u003c\/p\u003e\n\u003cp\u003eA quick word on quantity. This is a single bulb. If you're replacing a bulb in a two-lamp setup, like a pair of fog lights, it's worth buying two and changing both at the same time. Halogen filaments age together, so when one goes the other usually isn't far behind, and matched bulbs keep your beam color even side to side. That's a recommendation, not a requirement. Buy one if one is all you need.\u003c\/p\u003e\n\u003cp\u003eThis bulb is DOT and SAE compliant, so it meets the U.S. Department of Transportation and Society of Automotive Engineers standards for on-road use. That matters if the lamp it's going into is a street-legal fog or driving light. It's a standard-output 55-watt H1, not an over-wattage specialty bulb, so it won't overload a factory lamp housing or wiring that was built for a 55-watt load.\u003c\/p\u003e\n\u003cp\u003eHella Marine has been building lighting for the ocean for decades, and that fit-and-forget approach shows up even in a simple replacement bulb like this one. It's the kind of part you install once and don't think about again until it's time for the next one. If your lamp takes an H1 and runs on 12 volts, this is the straightforward, honest replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eH1 single-filament halogen design with a P14.5s base for a direct drop-in replacement\u003c\/li\u003e\n  \u003cli\u003e55-watt output on a 12-volt system, drawing roughly 4.6 amps when lit\u003c\/li\u003e\n  \u003cli\u003eCompact T2.5 quartz glass capsule sized for reflector and projector optics\u003c\/li\u003e\n  \u003cli\u003eClear beam color delivers standard warm-white halogen light for fog, driving, and spot lamps\u003c\/li\u003e\n  \u003cli\u003eDOT and SAE compliant for street-legal on-road lamps\u003c\/li\u003e\n  \u003cli\u003eSingle transverse filament positioned for accurate beam placement\u003c\/li\u003e\n  \u003cli\u003eOne bulb per pack, replace in pairs for even beam color side to side\u003c\/li\u003e\n  \u003cli\u003eHella Marine fit-and-forget build quality for marine, trailer, and automotive lighting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat base does this Hella H1 bulb use?\u003c\/summary\u003e\n    \u003cp\u003eIt uses a P14.5s base, the standard fitting for H1 bulbs. It seats into the lamp housing and locks with the retaining clip or wire spring in your fixture. If your lamp is built for an H1, this drops right in.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this one bulb or a pair?\u003c\/summary\u003e\n    \u003cp\u003eIt's a single bulb, one per pack. If you're replacing bulbs in a two-lamp setup like a pair of fog lights, buy two so you can change both at once and keep the beam color matched side to side.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the wattage and voltage ratings?\u003c\/summary\u003e\n    \u003cp\u003eIt's a 55-watt bulb for a 12-volt system. At 55 watts on 12 volts it draws about 4.6 amps when lit, which matters if you're sizing wiring or fuses for a new circuit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it in fog and driving lamps?\u003c\/summary\u003e\n    \u003cp\u003eYes. The H1 is one of the most common bulbs in fog, driving, and spot lamps, both on the water and on a trailer or tow vehicle. As long as the lamp takes an H1 on 12 volts, this is the right replacement.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this bulb street legal?\u003c\/summary\u003e\n    \u003cp\u003eIt's DOT and SAE compliant, meaning it meets U.S. Department of Transportation and Society of Automotive Engineers standards for on-road use. That's what you want for a street-legal fog or driving lamp.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color light does it produce?\u003c\/summary\u003e\n    \u003cp\u003eThe beam color is clear, which is standard warm-white halogen light with no coating or tint. That's the color most fog and driving optics are designed around, and it cuts through spray and haze well.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I touch the glass when I install it?\u003c\/summary\u003e\n    \u003cp\u003eNo. Handle the bulb by its metal base, not the glass. Skin oils create hot spots on the quartz capsule that shorten the bulb's life or crack it early. If you do touch the glass, wipe it with rubbing alcohol before powering it up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a higher-wattage upgrade bulb?\u003c\/summary\u003e\n    \u003cp\u003eNo, it's a standard-output 55-watt H1. It won't overload a factory lamp housing or wiring built for a 55-watt load, so it's a safe straight replacement rather than an over-wattage specialty bulb.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it fit any H1 lamp?\u003c\/summary\u003e\n    \u003cp\u003eIt fits any lamp designed for an H1 bulb on a 12-volt system, using the P14.5s base. H1 refers to the bulb shape and base, not the brand, so if your fixture calls for an H1 at 12 volts, this works.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eH1 Halogen Bulb, 55 Watt, 12 Volt, Clear Beam, Single, DOT\/SAE Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eH1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e760687139706\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBulb Type\u003c\/th\u003e\n\u003ctd\u003eH1 Halogen\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e55 Watts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e12 Volts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBase Type\u003c\/th\u003e\n\u003ctd\u003eP14.5s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCapsule \/ Envelope\u003c\/th\u003e\n\u003ctd\u003eT2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Color\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFilament\u003c\/th\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSingle (1 bulb)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApproximate Current Draw\u003c\/th\u003e\n\u003ctd\u003e4.6 Amps (55W \/ 12V)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eDOT \/ SAE Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What base does this Hella H1 bulb use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It uses a P14.5s base, the standard fitting for H1 bulbs. It seats into the lamp housing and locks with the retaining clip or wire spring in your fixture. If your lamp is built for an H1, this drops right in.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this one bulb or a pair?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a single bulb, one per pack. If you're replacing bulbs in a two-lamp setup like a pair of fog lights, buy two so you can change both at once and keep the beam color matched side to side.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the wattage and voltage ratings?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a 55-watt bulb for a 12-volt system. At 55 watts on 12 volts it draws about 4.6 amps when lit, which matters if you're sizing wiring or fuses for a new circuit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it in fog and driving lamps?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The H1 is one of the most common bulbs in fog, driving, and spot lamps, both on the water and on a trailer or tow vehicle. As long as the lamp takes an H1 on 12 volts, this is the right replacement.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this bulb street legal?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's DOT and SAE compliant, meaning it meets U.S. Department of Transportation and Society of Automotive Engineers standards for on-road use. That's what you want for a street-legal fog or driving lamp.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color light does it produce?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The beam color is clear, which is standard warm-white halogen light with no coating or tint. That's the color most fog and driving optics are designed around, and it cuts through spray and haze well.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I touch the glass when I install it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. Handle the bulb by its metal base, not the glass. Skin oils create hot spots on the quartz capsule that shorten the bulb's life or crack it early. If you do touch the glass, wipe it with rubbing alcohol before powering it up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a higher-wattage upgrade bulb?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, it's a standard-output 55-watt H1. It won't overload a factory lamp housing or wiring built for a 55-watt load, so it's a safe straight replacement rather than an over-wattage specialty bulb.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it fit any H1 lamp?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It fits any lamp designed for an H1 bulb on a 12-volt system, using the P14.5s base. H1 refers to the bulb shape and base, not the brand, so if your fixture calls for an H1 at 12 volts, this works.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":67601484677213,"sku":"2011305","price":5.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_37bb26d1-72b0-4741-9b8b-80b5f5d39f79.jpg?v=1791012939","url":"https:\/\/nvnmarine.com\/products\/hella-marine-h1-55w-12v-halogen-bulb-clear-dot-sae","provider":"NVN Marine","version":"1.0","type":"link"}