{"product_id":"hella-marine-black-series-3-2in-led-cube-kit-spot","title":"Hella Marine Black Series 3.2 Inch LED Cube Kit, Spot Beam","description":"\u003cp class=\"nvn-hero\"\u003eHella Marine's Black Series 3.2 Inch LED Cube Kit is a complete auxiliary spot lighting setup in one box: two compact cube lights, a relay, a switch, and a wiring harness ready to go. Each light throws 3000 lumens of tight spot beam from a black housing built to take spray and vibration. Mount them on a T-top, a hardtop, or a bow rail and light up the water ahead.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Hella Marine Black Series 3.2 Inch LED Cube Kit is a full auxiliary spot lighting package, not just a pair of bare lights. Open the box and you get two compact cube lights, a relay, a switch, and a wiring harness with a DT connector already fitted. That means you're not hunting down parts at three different counters before you can wire anything in. It's the kind of kit we like to hand a boater who wants real light thrown ahead of the bow without piecing a system together from scratch.\u003c\/p\u003e\n\u003cp\u003eEach cube runs four LEDs behind a tight spot beam and puts out 3000 lumens. Spot is the key word here. This beam is built to reach, not to spread. If you're idling up to a mooring in the dark, picking out crab pot floats on a pre-dawn run, or spotting a channel marker well before you're on top of it, the spot pattern is what you want. It pushes a concentrated column of light down range instead of washing the deck right in front of you.\u003c\/p\u003e\n\u003cp\u003eThe housing measures 3.2 inches wide, 3.3 inches tall, and 2.7 inches deep. Small footprint, so these tuck onto a T-top edge, a hardtop, a radar arch, or a bow rail without dominating the look of the boat. The rectangular black housing keeps a low profile and a clean, blacked-out appearance during the day when the lights are off.\u003c\/p\u003e\n\u003cp\u003eOn power, each light draws 3.4 amps at 12 volts or 1.6 amps at 24 volts. Run both lights on a 12-volt system and you're looking at roughly 6.8 amps total, so size your wire and breaker for the full load. We'd run a dedicated circuit with a 12 AWG feed and a properly rated breaker or fuse rather than tapping an existing accessory run that's already carrying other gear. The included relay does the heavy switching, so your dash switch only needs to handle a light trigger current. That keeps the switched wiring simple and safe.\u003c\/p\u003e\n\u003cp\u003eWiring is where the kit really earns its keep. The harness ships with a DT connector, a sealed, locking plug that's the standard for gear that lives outdoors and gets rained on, splashed, and vibrated for years. The relay and switch are in the box, so a competent DIYer can lay out the run, mount the lights, and land the connections in an afternoon. One tip from the water: the factory pigtails can be short for a long console run, so plan to extend them with proper marine-grade connectors and heat shrink if your switch panel sits well aft of the lights.\u003c\/p\u003e\n\u003cp\u003eMounting is universal stud mount. Each light hangs off a single threaded stud, which makes aiming quick and keeps the hardware count low. Because it's a single stud, we always tell folks to use the locking hardware, add a backing plate behind thin fiberglass or aluminum, and check the aim after the first few runs. A stud mount that isn't snugged down properly can walk out of alignment from the pounding a center console takes offshore. A dab of thread locker and a backing washer solve that for good.\u003c\/p\u003e\n\u003cp\u003eThese cubes carry the Hella Marine name, and that badge comes with a long reputation for fit-and-forget hardware built from quality materials for life on the water. The same lights are a favorite in the off-road and utility world too, so they're equally at home on a work truck, a UTV, or a trailer. Marine helm, dune buggy, or job-site rig, the spot beam and the sealed connector do the same job.\u003c\/p\u003e\n\u003cp\u003eA couple of honest notes so you buy the right thing. This is the spot version, which is a reach light, not a wide wash for close-in deck work. If you want to flood the cockpit or the swim platform, pair these with a wider beam so each does what it's good at. And this kit contains two lights, the relay, the switch, and the harness. That's a complete two-light install, ready to wire the day it lands on your bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eComplete two-light kit: two 3.2-inch cube lights plus a relay, a switch, and a wiring harness in one box\u003c\/li\u003e\n  \u003cli\u003e3000 lumens per light from four LEDs for real down-range reach\u003c\/li\u003e\n  \u003cli\u003eSpot beam pattern throws a concentrated column of light for spotting markers, moorings, and hazards well ahead\u003c\/li\u003e\n  \u003cli\u003e40-watt draw of 3.4 A at 12V or 1.6 A at 24V per light, so it runs on both common boat systems\u003c\/li\u003e\n  \u003cli\u003eSealed DT connector on the harness stands up to spray, rain, and years of vibration\u003c\/li\u003e\n  \u003cli\u003eIncluded relay handles the switching load so your dash switch only carries trigger current\u003c\/li\u003e\n  \u003cli\u003eCompact black housing, 3.2 in W x 3.3 in H x 2.7 in D, tucks onto T-tops, hardtops, and rails\u003c\/li\u003e\n  \u003cli\u003eUniversal stud mount for quick aiming and a low hardware count\u003c\/li\u003e\n  \u003cli\u003eBlacked-out rectangular housing keeps a clean look on the boat during the day\u003c\/li\u003e\n  \u003cli\u003eHella Marine fit-and-forget build for life on the water, at home on boats and off-road rigs alike\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat comes in the kit?\u003c\/summary\u003e\n    \u003cp\u003eTwo LED spotlights, one relay, one switch, and one wiring harness with a DT connector. It's a complete two-light install, so you don't have to source the relay and switch separately.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a spot beam or a flood?\u003c\/summary\u003e\n    \u003cp\u003eThis is the spot version. The beam is built to reach down range, not to spread wide. It's ideal for spotting markers, moorings, and hazards ahead rather than washing the deck right in front of you. For close-in cockpit or swim-platform light, pair it with a wider beam.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright is each light?\u003c\/summary\u003e\n    \u003cp\u003eEach cube puts out 3000 lumens from four LEDs.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work on a 24-volt system?\u003c\/summary\u003e\n    \u003cp\u003eYes. Each light runs on either 12 or 24 volts, drawing 3.4 amps at 12 volts or 1.6 amps at 24 volts.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much current does the kit draw?\u003c\/summary\u003e\n    \u003cp\u003eEach light draws 3.4 amps at 12 volts, so both lights together pull roughly 6.8 amps on a 12-volt system. On 24 volts each light draws 1.6 amps. Size your wire and breaker for the full load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat wire and breaker should I use?\u003c\/summary\u003e\n    \u003cp\u003eWe'd run a dedicated circuit with a 12 AWG feed and a properly rated breaker or fuse rather than tapping an accessory run that's already carrying other gear. That keeps voltage drop down and the lights running at full output.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need the relay, or can I wire straight to a switch?\u003c\/summary\u003e\n    \u003cp\u003eUse the included relay. It handles the heavy switching current so your dash switch only carries a light trigger signal, which keeps the switched wiring simple and safe. The relay is in the box.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do the lights mount?\u003c\/summary\u003e\n    \u003cp\u003eThey use a universal stud mount. Each light hangs off a single threaded stud for quick aiming. Use the locking hardware, add a backing plate behind thin fiberglass or aluminum, and check the aim after the first few runs so vibration doesn't walk them out of alignment.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat connector does the harness use?\u003c\/summary\u003e\n    \u003cp\u003eThe harness comes fitted with a DT connector, a sealed, locking plug that's the standard for outdoor gear exposed to rain, spray, and vibration.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use these off the water, on a truck or UTV?\u003c\/summary\u003e\n    \u003cp\u003eYes. The same cube lights are popular in the off-road and utility world. The spot beam and sealed connector work the same on a work truck, a UTV, or a trailer as they do at the helm.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many lights are in one kit?\u003c\/summary\u003e\n    \u003cp\u003eOne kit includes two spotlights. That covers a standard two-light install with the relay, switch, and harness included.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eHella Marine Black Series 3.2 Inch LED Cube Kit, Spot Beam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e358176821\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e4082300807653\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eBlack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLights Included\u003c\/th\u003e\n\u003ctd\u003e2 LED Spotlights\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLEDs Per Light\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Dimensions (W x H x D)\u003c\/th\u003e\n\u003ctd\u003e3.2 in x 3.3 in x 2.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Shape\u003c\/th\u003e\n\u003ctd\u003eRectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e40 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmp Draw\u003c\/th\u003e\n\u003ctd\u003e3.4 A at 12 Volt \/ 1.6 A at 24 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating Voltage\u003c\/th\u003e\n\u003ctd\u003e12V \/ 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eSpot\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Output\u003c\/th\u003e\n\u003ctd\u003e3000 Lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Color\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eUniversal Stud Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eDT Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003e(2) LED Spotlights, (1) Relay, (1) Switch, (1) Wiring Harness with DT Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What comes in the kit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Two LED spotlights, one relay, one switch, and one wiring harness with a DT connector. It's a complete two-light install, so you don't have to source the relay and switch separately.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a spot beam or a flood?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This is the spot version. The beam is built to reach down range, not to spread wide. It's ideal for spotting markers, moorings, and hazards ahead rather than washing the deck right in front of you. For close-in cockpit or swim-platform light, pair it with a wider beam.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright is each light?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Each cube puts out 3000 lumens from four LEDs.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work on a 24-volt system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Each light runs on either 12 or 24 volts, drawing 3.4 amps at 12 volts or 1.6 amps at 24 volts.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much current does the kit draw?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Each light draws 3.4 amps at 12 volts, so both lights together pull roughly 6.8 amps on a 12-volt system. On 24 volts each light draws 1.6 amps. Size your wire and breaker for the full load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What wire and breaker should I use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"We'd run a dedicated circuit with a 12 AWG feed and a properly rated breaker or fuse rather than tapping an accessory run that's already carrying other gear. That keeps voltage drop down and the lights running at full output.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need the relay, or can I wire straight to a switch?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Use the included relay. It handles the heavy switching current so your dash switch only carries a light trigger signal, which keeps the switched wiring simple and safe. The relay is in the box.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do the lights mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"They use a universal stud mount. Each light hangs off a single threaded stud for quick aiming. Use the locking hardware, add a backing plate behind thin fiberglass or aluminum, and check the aim after the first few runs so vibration doesn't walk them out of alignment.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What connector does the harness use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The harness comes fitted with a DT connector, a sealed, locking plug that's the standard for outdoor gear exposed to rain, spray, and vibration.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use these off the water, on a truck or UTV?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The same cube lights are popular in the off-road and utility world. The spot beam and sealed connector work the same on a work truck, a UTV, or a trailer as they do at the helm.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many lights are in one kit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"One kit includes two spotlights. That covers a standard two-light install with the relay, switch, and harness included.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":45052053291101,"sku":"2008169","price":133.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_0ac3947e-6bd3-44da-b176-9d4f5e3936b2.jpg?v=1789409292","url":"https:\/\/nvnmarine.com\/products\/hella-marine-black-series-3-2in-led-cube-kit-spot","provider":"NVN Marine","version":"1.0","type":"link"}