{"product_id":"hella-marine-black-series-3-2-led-cube-kit-spot","title":"Hella Marine Black Series 3.2 Inch LED Cube Kit, Spot Beam","description":"\u003cp class=\"nvn-hero\"\u003eThe Hella Marine Black Series 3.2 inch LED cube kit is a complete two-light spot-beam setup. You get a matched pair of blacked-out cube lights, a relay, a helm switch, and a pre-wired DT-connector harness. 3000 lumens of tight, long-throw light for docking, night runs, and lighting the water ahead.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eHella Marine's Black Series 3.2 inch LED cube kit gives you a complete two-light setup right out of the box. You get a pair of spot-beam cube lights, a relay, a switch, and a pre-wired harness with a Deutsch DT connector. So there's no guessing at parts or hunting down a switch that fits. Wire in the relay, mount the switch at the helm, and drop the lights wherever you need the throw. For a lot of boats, that's an afternoon job with hand tools and a test light.\u003c\/p\u003e\n\u003cp\u003eThese are spot-beam lights, and that matters. A spot pattern puts a tight, focused column of light way out in front of you instead of spreading it wide like a flood. That's what you want when you're picking a mooring ball out of the dark, lining up a channel marker, or throwing light across the water at a dock you've never pulled into before. A flood would wash out at that distance. A spot cuts through. They're rated at 40 watts and 3000 lumens with a tight spot beam, so there's real reach behind them.\u003c\/p\u003e\n\u003cp\u003eWhere do folks put them? Plenty of boaters run a pair up on the hardtop as forward-facing spotlights for night runs. Others mount them low on the bow as docking lights, or aft to throw light across the cockpit and swim platform after the sun goes down. Some anglers aim them at the water for night fishing. The beam pattern's the same. You just point it where the work is. A pair aimed forward turns a black-water run into something you can actually read.\u003c\/p\u003e\n\u003cp\u003eThe blacked-out housing keeps them low-key in daylight, whether they're on a hardtop, a T-top, or a tower. The rectangular body measures 3.2 inches wide by 3.3 inches tall by 2.7 inches deep, so they tuck in without hogging real estate. And because they're a flush-mount design, they sit clean and tight against whatever surface you bolt them to.\u003c\/p\u003e\n\u003cp\u003ePower-wise, they play nice with both common boat systems. Amp draw is 3.4 amps at 12 volts or 1.6 amps at 24 volts, so they'll run on a standard house bank or a 24-volt setup without any adapters. The included relay does the heavy lifting on the current, which means the switch at your helm only carries a light signal load. That's the right way to wire auxiliary lights, and Hella Marine already did that homework for you.\u003c\/p\u003e\n\u003cp\u003eThe Deutsch DT connector on the harness is a nice touch. It's a sealed, locking connector built for exactly this kind of exposed, wet wiring, and it turns pulling a light for service into a plug-and-unplug job instead of a cut-and-splice headache.\u003c\/p\u003e\n\u003cp\u003eA few things worth knowing before you drill. Flush-mount lights live and die by the seal at the bezel, so bed them in butyl tape or a quality marine sealant before you snug the fasteners down. Water sitting against an unsealed joint will find its way in over a season. If you're mounting on cored fiberglass, back the bolts with a proper backing plate or an aluminum strip so you're not loading the gelcoat directly. And if you're running the leads a long way, out to the bow or up a tall tower, step up your wire gauge to fight voltage drop. Thin wire on a long run robs you of brightness and heats up.\u003c\/p\u003e\n\u003cp\u003eOne honest note on the beam. Lights this bright are great for reaching out, but 3000 lumens up close can throw a lot of glare back at you on a small runabout at night. That's exactly why the kit ships with a switch. Kill them when you don't need them, flip them on when you're working the water ahead. Used right, this Hella Marine cube kit is a clean, capable way to add serious spot lighting to just about any boat.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eComplete two-light kit: a matched pair of spot-beam LED cube lights ready to mount\u003c\/li\u003e\n  \u003cli\u003e3000 lumens of bright, focused spot-beam output for real long-range throw\u003c\/li\u003e\n  \u003cli\u003e40 watt rating with amp draw of 3.4 amps at 12 volts or 1.6 amps at 24 volts, compatible with both common boat systems\u003c\/li\u003e\n  \u003cli\u003eSpot beam pattern throws a tight column of light for docking, channel markers, and night runs\u003c\/li\u003e\n  \u003cli\u003eCompact rectangular housing, 3.2 in wide by 3.3 in tall by 2.7 in deep, tucks onto a hardtop or tower\u003c\/li\u003e\n  \u003cli\u003eBlacked-out housing keeps a low profile in daylight\u003c\/li\u003e\n  \u003cli\u003eFlush-mount design sits clean against the mounting surface\u003c\/li\u003e\n  \u003cli\u003eIncludes a relay, helm switch, and pre-wired harness with a sealed Deutsch DT connector\u003c\/li\u003e\n  \u003cli\u003eRelay carries the current so the helm switch only handles a light signal load\u003c\/li\u003e\n  \u003cli\u003eFour-LED spot-beam design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's included in the kit?\u003c\/summary\u003e\n    \u003cp\u003eEverything you need to wire in a pair. The kit ships with two LED spotlights, one relay, one switch, and one wiring harness with a Deutsch DT connector.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the difference between a spot beam and a flood?\u003c\/summary\u003e\n    \u003cp\u003eA spot beam throws a tight, focused column of light a long way out in front of you. A flood spreads wide and close. These are spot-beam lights, so they're built for reaching out, lining up a marker, or lighting a dock at distance rather than washing a wide area up close.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill these run on a 24-volt system?\u003c\/summary\u003e\n    \u003cp\u003eYes. Amp draw is 3.4 amps at 12 volts or 1.6 amps at 24 volts, so they'll run on either a standard 12-volt house bank or a 24-volt setup with no adapters.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright are they?\u003c\/summary\u003e\n    \u003cp\u003eThey're rated at 3000 lumens with a 40 watt draw. That's a lot of focused light for a cube this size.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow big is each light?\u003c\/summary\u003e\n    \u003cp\u003eThe rectangular housing is 3.2 inches wide by 3.3 inches tall by 2.7 inches deep, so they tuck onto a hardtop, T-top, or tower without taking up much room.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I have to use the relay?\u003c\/summary\u003e\n    \u003cp\u003eYou should, and it's included. The relay carries the current for the lights so the switch at your helm only handles a small signal load. That's the correct way to wire auxiliary lighting, and it keeps your switch from cooking.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I mount these on fiberglass?\u003c\/summary\u003e\n    \u003cp\u003eYes. Back the bolts with a proper backing plate or an aluminum strip so you're not loading the gelcoat directly, and bed the flush-mount bezel in butyl tape or a marine sealant so water can't sit against an unsealed joint.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre these flush mount or surface mount?\u003c\/summary\u003e\n    \u003cp\u003eFlush mount. The housing sits clean and tight against the surface you bolt it to.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat connector does the harness use?\u003c\/summary\u003e\n    \u003cp\u003eA sealed, locking Deutsch DT connector. It's built for wet, exposed wiring and makes pulling a light for service a plug-and-unplug job instead of a cut-and-splice one.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many lights come in the kit?\u003c\/summary\u003e\n    \u003cp\u003eTwo. It's a matched pair, so you can run one on each side or aim both forward.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eHella Marine Black Series 3.2 Inch LED Cube Kit, Spot Beam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e358176831\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e4082300807646\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLights Per Kit\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003e(2) LED Spotlights, (1) Relay, (1) Switch, (1) Wiring Harness with DT Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eSpot Beam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Output\u003c\/th\u003e\n\u003ctd\u003e3000 Lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e40 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmp Draw (12V)\u003c\/th\u003e\n\u003ctd\u003e3.4 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAmp Draw (24V)\u003c\/th\u003e\n\u003ctd\u003e1.6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating Voltage\u003c\/th\u003e\n\u003ctd\u003e12V \/ 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Count\u003c\/th\u003e\n\u003ctd\u003e4 LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Color\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Shape\u003c\/th\u003e\n\u003ctd\u003eRectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eFlush Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Dimensions (W x H x D)\u003c\/th\u003e\n\u003ctd\u003e3.2 in x 3.3 in x 2.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector Type\u003c\/th\u003e\n\u003ctd\u003eDeutsch DT Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's included in the kit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Everything you need to wire in a pair. The kit ships with two LED spotlights, one relay, one switch, and one wiring harness with a Deutsch DT connector.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the difference between a spot beam and a flood?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A spot beam throws a tight, focused column of light a long way out in front of you. A flood spreads wide and close. These are spot-beam lights, so they're built for reaching out, lining up a marker, or lighting a dock at distance rather than washing a wide area up close.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will these run on a 24-volt system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Amp draw is 3.4 amps at 12 volts or 1.6 amps at 24 volts, so they'll run on either a standard 12-volt house bank or a 24-volt setup with no adapters.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright are they?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"They're rated at 3000 lumens with a 40 watt draw. That's a lot of focused light for a cube this size.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How big is each light?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The rectangular housing is 3.2 inches wide by 3.3 inches tall by 2.7 inches deep, so they tuck onto a hardtop, T-top, or tower without taking up much room.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I have to use the relay?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You should, and it's included. The relay carries the current for the lights so the switch at your helm only handles a small signal load. That's the correct way to wire auxiliary lighting, and it keeps your switch from cooking.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I mount these on fiberglass?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Back the bolts with a proper backing plate or an aluminum strip so you're not loading the gelcoat directly, and bed the flush-mount bezel in butyl tape or a marine sealant so water can't sit against an unsealed joint.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are these flush mount or surface mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Flush mount. The housing sits clean and tight against the surface you bolt it to.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What connector does the harness use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A sealed, locking Deutsch DT connector. It's built for wet, exposed wiring and makes pulling a light for service a plug-and-unplug job instead of a cut-and-splice one.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many lights come in the kit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Two. It's a matched pair, so you can run one on each side or aim both forward.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":45052900442205,"sku":"2008185","price":130.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_0410c3bf-9d14-44a3-8247-c7ce271e61e2.jpg?v=1789418142","url":"https:\/\/nvnmarine.com\/products\/hella-marine-black-series-3-2-led-cube-kit-spot","provider":"NVN Marine","version":"1.0","type":"link"}