{"product_id":"hella-marine-black-magic-tough-21-5-led-light-bar","title":"Hella Marine Black Magic Tough 21.5\" Double Row LED Light Bar","description":"\u003cp class=\"nvn-hero\"\u003eThe Hella Marine Black Magic Tough is a 21-1\/2 inch double row LED light bar built for boats that leave before sunup and come home after dark. Forty LEDs push up to 11,000 lumens through a smoke lens, and the combo beam gives you both distance down the channel and wide coverage off the bow.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Hella Marine Black Magic Tough is a 21-1\/2 inch double row LED light bar built for boats that run in the dark. Forty LEDs put out up to 11,000 lumens, and that's enough to turn a black cove into something you can actually read. Hella Marine builds these lamps as what they call \"Fit and Forget\" gear, and after rigging a few of them, that's a fair way to describe it. You wire it in once and stop thinking about it.\u003c\/p\u003e\n\u003cp\u003eThe combo beam is the part worth understanding before you buy. A double row of LEDs lets Hella split the optics, so some of those diodes throw a tight spot far down the water while the rest spread a wide flood right in front of the boat. That's the combination you want on a light bar. Pure spot beams reach out but leave a dark hole close in, and pure floods light up the foredeck but die off at distance. This one covers both, which is why it works whether you're picking up crab pots at a distance or backing into a slip.\u003c\/p\u003e\n\u003cp\u003ePower is flexible. It runs on anything from 10 to 30 volts DC, so it drops onto a 12 volt center console or a 24 volt system without any changes. Do keep the draw in mind. At 215 watts, this bar pulls close to 18 amps on a 12 volt system, so it wants proper wire. On the water we run 8 to 10 AWG straight back toward the battery through a relay and a fuse, not a thin accessory lead tapped off the dash. Undersized wire is where you lose brightness to voltage drop, and it's the most common reason a bar this bright looks dimmer than it should.\u003c\/p\u003e\n\u003cp\u003eThe build is where the marine pedigree shows. The housing is die-cast aluminum, which sheds heat off the LEDs and stands up to salt air far better than a plastic shell. It ships with a black stainless steel mounting bracket, so the hardware holding it to your hardtop or bow rail isn't going to rust into a stain down your gelcoat. One tip from years of saltwater installs: hit the electrical connections with dielectric grease when you wire it in. Stainless resists corrosion, but the pins and terminals behind the connector still appreciate the protection, and it makes the next service a lot easier.\u003c\/p\u003e\n\u003cp\u003eThe smoke lens is a nice touch. When the bar is off, it reads as a clean, blacked-out strip instead of a row of bright reflectors, so it blends into a dark hardtop or tower during the day. Switch it on and the combo beam does its work. If you already run spreader lights, plan to wire the bar to its own switch and aim it separately. You want the reach out front, not glare bouncing back at the helm.\u003c\/p\u003e\n\u003cp\u003eA couple of things about heat and placement. Forty LEDs at full draw make heat, and that's exactly why Hella went with a die-cast aluminum housing instead of plastic. The metal acts as a heat sink and pulls warmth away from the diodes, which is a big part of why these lamps last. Give it a little air behind the housing if you can, rather than burying it tight against a surface, and it'll run cooler and longer. When it comes to aiming, mount the bar level and set it so the hot part of the beam lands out on the water where you're actually looking, not down at your own bow wake. A few minutes spent aiming it right at the dock pays off every night after.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anglers running to the grounds in the dark, anyone who idles into an unlit ramp at the end of the day, and boaters who want real forward lighting on a hardtop, tower, or bow. Mount it high and level for the best throw, run the right wire, and it'll do exactly what a light bar should. It clears the water ahead and then gets out of your way.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e40 high-output LEDs deliver up to 11,000 lumens for real dark-water visibility\u003c\/li\u003e\n  \u003cli\u003eCombo beam pattern pairs tight spot throw with wide flood spread in one bar\u003c\/li\u003e\n  \u003cli\u003e10 to 30 volt DC input runs on both 12V and 24V boat systems with no changes\u003c\/li\u003e\n  \u003cli\u003e215 watt rated draw, plan on roughly 18 amps at 12 volts and wire accordingly\u003c\/li\u003e\n  \u003cli\u003e21-1\/2 inch length fits hardtops, towers, and bow rails on most boats\u003c\/li\u003e\n  \u003cli\u003eDie-cast aluminum housing sheds LED heat and stands up to salt air\u003c\/li\u003e\n  \u003cli\u003eSmoke lens reads as a clean blacked-out strip when the bar is switched off\u003c\/li\u003e\n  \u003cli\u003eBlack stainless steel mounting bracket resists saltwater corrosion\u003c\/li\u003e\n  \u003cli\u003eDouble row LED layout allows the split spot-and-flood combo optics\u003c\/li\u003e\n  \u003cli\u003eBracket mount setup for hardtop, tower, or rail installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright is the Black Magic Tough light bar?\u003c\/summary\u003e\n    \u003cp\u003eIt puts out up to 11,000 lumens from 40 LEDs. That's genuine forward lighting, enough to clear a dark channel or light up a cove, not just a courtesy glow.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work on my 12 volt boat?\u003c\/summary\u003e\n    \u003cp\u003eYes. It accepts 10 to 30 volts DC, so it runs on a standard 12 volt system and on 24 volt boats without any changes or a converter.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is a combo beam and why does it matter?\u003c\/summary\u003e\n    \u003cp\u003eA combo beam mixes spot and flood optics in one bar. Some LEDs throw a tight beam far down the water while others spread wide right in front of the boat, so you get both distance and close coverage instead of one or the other.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size wire should I run for it?\u003c\/summary\u003e\n    \u003cp\u003eAt 215 watts it pulls close to 18 amps on a 12 volt system. We recommend 8 to 10 AWG run back toward the battery through a relay and a fuse. Undersized wire causes voltage drop, which dims the bar and is the most common install mistake.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it built for salt water?\u003c\/summary\u003e\n    \u003cp\u003eIt's designed for it. The housing is die-cast aluminum and the mounting bracket is black stainless steel. We still suggest putting dielectric grease on the electrical connections at install to protect the terminals over the long haul.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long is the bar?\u003c\/summary\u003e\n    \u003cp\u003eIt's 21-1\/2 inches long, a size that fits well on most hardtops, towers, and bow rails without overwhelming the boat.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy does it have a smoke lens?\u003c\/summary\u003e\n    \u003cp\u003eThe smoke lens gives the bar a clean, blacked-out look when it's off, so it blends into a dark hardtop or tower during the day. Turn it on and the combo beam does its work.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount?\u003c\/summary\u003e\n    \u003cp\u003eIt's a bracket mount and ships with a black stainless steel bracket. Mount it high and level for the best throw, on a hardtop, tower, or bow rail.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I run it alongside my spreader lights?\u003c\/summary\u003e\n    \u003cp\u003eYes, but wire it to its own switch and aim it separately. You want the reach out front, not glare from overlapping lights bouncing back toward the helm.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a warranty?\u003c\/summary\u003e\n    \u003cp\u003eYes. Full Hella Marine manufacturer warranty applies. We're an authorized Hella Marine reseller, so any warranty question runs through us.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eHella Marine Black Magic Tough 21.5\" Double Row LED Light Bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e358197401\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e4082300863062\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eBlack Magic Tough\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e21-1\/2 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Count\u003c\/th\u003e\n\u003ctd\u003e40 LED Bulbs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e215 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating Voltage\u003c\/th\u003e\n\u003ctd\u003e10 To 30 Volt DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eCombo Beam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Output\u003c\/th\u003e\n\u003ctd\u003e11,000 Lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens\u003c\/th\u003e\n\u003ctd\u003eSmoke Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eDie-Cast Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eDouble Row Light Bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBracket Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Bracket\u003c\/th\u003e\n\u003ctd\u003eBlack Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright is the Black Magic Tough light bar?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It puts out up to 11,000 lumens from 40 LEDs. That's genuine forward lighting, enough to clear a dark channel or light up a cove, not just a courtesy glow.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work on my 12 volt boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It accepts 10 to 30 volts DC, so it runs on a standard 12 volt system and on 24 volt boats without any changes or a converter.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is a combo beam and why does it matter?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A combo beam mixes spot and flood optics in one bar. Some LEDs throw a tight beam far down the water while others spread wide right in front of the boat, so you get both distance and close coverage instead of one or the other.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size wire should I run for it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"At 215 watts it pulls close to 18 amps on a 12 volt system. We recommend 8 to 10 AWG run back toward the battery through a relay and a fuse. Undersized wire causes voltage drop, which dims the bar and is the most common install mistake.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it built for salt water?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's designed for it. The housing is die-cast aluminum and the mounting bracket is black stainless steel. We still suggest putting dielectric grease on the electrical connections at install to protect the terminals over the long haul.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long is the bar?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's 21-1\/2 inches long, a size that fits well on most hardtops, towers, and bow rails without overwhelming the boat.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why does it have a smoke lens?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The smoke lens gives the bar a clean, blacked-out look when it's off, so it blends into a dark hardtop or tower during the day. Turn it on and the combo beam does its work.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a bracket mount and ships with a black stainless steel bracket. Mount it high and level for the best throw, on a hardtop, tower, or bow rail.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I run it alongside my spreader lights?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, but wire it to its own switch and aim it separately. You want the reach out front, not glare from overlapping lights bouncing back toward the helm.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a warranty?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Full Hella Marine manufacturer warranty applies. We're an authorized Hella Marine reseller, so any warranty question runs through us.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":44998316392541,"sku":"2007644","price":292.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_f39f53ca-d4ad-4e47-b180-701c8df275ef.jpg?v=1788672123","url":"https:\/\/nvnmarine.com\/products\/hella-marine-black-magic-tough-21-5-led-light-bar","provider":"NVN Marine","version":"1.0","type":"link"}