{"product_id":"hella-marine-990320001-pole-mount-bracket-black","title":"Hella Marine 990320001 Pole Mount Bracket, Black","description":"\u003cp class=\"nvn-hero\"\u003eThe Hella Marine 990320001 pole mount bracket lifts a single Hella beacon or work light up onto an arch, T-top, or console pole where it belongs. Finished in black, and this version ships with an AMP connector for a clean, keyed hookup to your boat's wiring. Built for salt air.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Hella Marine 990320001 is the pole mount bracket that gets your beacon or work light up where it can actually do some good. It's a single-light bracket, finished in black, and this is the version that ships with an AMP connector so you're not hunting for a plug the day you rig it up. If you've ever tried to zip-tie a work light to a rail and call it done, you already know why a purpose-built mount matters out here.\u003c\/p\u003e\n\u003cp\u003eHere's the short version. You've got a Hella beacon or work light, and you need it mounted high and aimed right. This bracket bolts that job down. It's designed around Hella's own beacons and work lights, so the fit is direct and the light sits where it should, not cocked at some angle because the mount was never meant for it.\u003c\/p\u003e\n\u003cp\u003eWhere does it go? Most folks run these on radar arches, hardtops, T-tops, and the poles you already have on a center console. The pole mount style clamps to a vertical post and lifts the light clear of the deck, so a beacon throws its warning where other boats can see it and a work light floods the cockpit instead of blinding you at the helm. On a sportfisher, height is everything for bow visibility, so plan your pole length before you commit. Too short and the light won't clear the hardtop.\u003c\/p\u003e\n\u003cp\u003eThe AMP connector is the part people appreciate after the fact. It gives you a clean, keyed connection between the light and your boat's wiring instead of a taped-up splice that corrodes by mid-season. That said, salt air is salt air. We tell every customer the same thing. Hit the connector and the set screws with a little dielectric grease when you install, and add lock washers anywhere that sees real vibration. Do that and the connection stays solid for years.\u003c\/p\u003e\n\u003cp\u003eA few honest notes from the water. This is a single-light bracket, full stop. If you want a pair of lights up on the arch, buy two brackets and space them yourself. It's built for Hella beacons and work lights, and a heavier work light on a tall pole puts more load on the base, so a backing plate behind the mounting surface is smart on anything thin like an arch tube or a fiberglass hardtop. And keep an eye on the base finish. Black powder coat looks sharp, but any mount lives a hard life in salt, so a quick rinse after a run and the occasional look at the set screws keeps corrosion from sneaking up on you.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anglers rigging a spreader light over the cockpit. Cruisers adding an all-round beacon for anchor-out visibility. Anyone running a work light off the arch for docking after dark, when the ramp is a black hole and you need to see the trailer. If your light is a Hella beacon or work light and you need it on a pole, this is the mount that was made for it. It does one job, and it does it right.\u003c\/p\u003e\n\u003cp\u003eWhat it's not. It's not a universal, fit-anything clamp, and it's not a dual-light bar bracket. It holds one Hella light on a pole, does it well, and stays out of the way. Simple gear that works is worth more on the water than clever gear that doesn't.\u003c\/p\u003e\n\u003cp\u003eEvery one ships from a marine crew that actually rigs this stuff. If you're not sure whether your pole diameter matches or whether you need a backing plate for your setup, give us a shout before you order. We'd rather get you the right mount the first time than sort out a return later.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003ePole mount design lifts a single Hella beacon or work light clear of the deck on arches, T-tops, and console poles\u003c\/li\u003e\n  \u003cli\u003eShips with an AMP connector for a clean, keyed connection to your boat's wiring instead of a taped splice\u003c\/li\u003e\n  \u003cli\u003eBlack finish keeps the bracket low-key against dark hardtops, arches, and rocket launchers\u003c\/li\u003e\n  \u003cli\u003eSingle-light bracket holds one Hella beacon or work light securely, no wobble once it's set\u003c\/li\u003e\n  \u003cli\u003eBuilt by Hella Marine for constant salt air and the vibration that comes with running offshore\u003c\/li\u003e\n  \u003cli\u003eDirect fit for Hella beacons and work lights, so there are no adapters to track down separately\u003c\/li\u003e\n  \u003cli\u003eCompact footprint mounts where space is tight around radar arches and hardtop edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat lights does this bracket fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's designed for Hella beacons and work lights, and it holds a single light. If your light is a Hella beacon or work lamp and you need it up on a pole, this is the mount made for it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a wiring connector?\u003c\/summary\u003e\n    \u003cp\u003eYes. This is the 'With Amp' version, so it ships with an AMP connector. That gives you a clean, keyed plug between the light and your boat's wiring rather than a hand-taped splice.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I mount two lights on one bracket?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's a single-light bracket. If you want a pair of lights across an arch, buy two brackets and space them where you want them.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is it?\u003c\/summary\u003e\n    \u003cp\u003eBlack. It blends in against dark hardtops, arches, and T-top tubing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it built for saltwater?\u003c\/summary\u003e\n    \u003cp\u003eIt's a Hella Marine part, built for life on the water. Like any hardware in salt air, it lasts longest if you rinse it after runs and keep the set screws and connector clean. A little dielectric grease at install goes a long way.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it hold up to vibration on the water?\u003c\/summary\u003e\n    \u003cp\u003eIt's made for it, but pounding offshore works everything loose eventually. Add lock washers at install if you're mounting somewhere that sees heavy vibration, and check the set screws now and then.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I mount it on a radar arch or thin hardtop?\u003c\/summary\u003e\n    \u003cp\u003eYes, arches and hardtops are common spots. For a heavier work light on a tall pole, put a backing plate behind the mounting surface so the load spreads out instead of stressing a thin tube or fiberglass panel.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I keep the connection from corroding?\u003c\/summary\u003e\n    \u003cp\u003eCoat the AMP connector and the set screws with dielectric grease when you install it. That keeps salt and moisture out of the electrical connection and slows corrosion at the fasteners.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many brackets come in the package?\u003c\/summary\u003e\n    \u003cp\u003eOne. This is sold as a single bracket. Order the quantity you need for your light setup.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the manufacturer part number?\u003c\/summary\u003e\n    \u003cp\u003eIt's Hella part number 990320001, UPC 9002920100724. Reference the part number if you're matching it to a specific Hella beacon or work light.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003ePole Mount Bracket; For Hella Beacons Or Work Lights; Black; Single; With Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eHella\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e990320001\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e9002920100724\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWork Light \/ Beacon Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003ePole Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Capacity\u003c\/th\u003e\n\u003ctd\u003eOne light\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eAMP connector included\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Lights\u003c\/th\u003e\n\u003ctd\u003eHella beacons and work lights\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What lights does this bracket fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's designed for Hella beacons and work lights, and it holds a single light. If your light is a Hella beacon or work lamp and you need it up on a pole, this is the mount made for it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a wiring connector?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. This is the 'With Amp' version, so it ships with an AMP connector. That gives you a clean, keyed plug between the light and your boat's wiring rather than a hand-taped splice.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I mount two lights on one bracket?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's a single-light bracket. If you want a pair of lights across an arch, buy two brackets and space them where you want them.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Black. It blends in against dark hardtops, arches, and T-top tubing.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it built for saltwater?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a Hella Marine part, built for life on the water. Like any hardware in salt air, it lasts longest if you rinse it after runs and keep the set screws and connector clean. A little dielectric grease at install goes a long way.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it hold up to vibration on the water?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's made for it, but pounding offshore works everything loose eventually. Add lock washers at install if you're mounting somewhere that sees heavy vibration, and check the set screws now and then.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I mount it on a radar arch or thin hardtop?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, arches and hardtops are common spots. For a heavier work light on a tall pole, put a backing plate behind the mounting surface so the load spreads out instead of stressing a thin tube or fiberglass panel.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I keep the connection from corroding?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Coat the AMP connector and the set screws with dielectric grease when you install it. That keeps salt and moisture out of the electrical connection and slows corrosion at the fasteners.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many brackets come in the package?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"One. This is sold as a single bracket. Order the quantity you need for your light setup.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the manufacturer part number?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's Hella part number 990320001, UPC 9002920100724. Reference the part number if you're matching it to a specific Hella beacon or work light.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":45074721996893,"sku":"2011134","price":35.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_76b8ac7f-f5c9-45e4-a6b9-9649963a1ab1.jpg?v=1789813445","url":"https:\/\/nvnmarine.com\/products\/hella-marine-990320001-pole-mount-bracket-black","provider":"NVN Marine","version":"1.0","type":"link"}