{"product_id":"hella-black-magic-23-inch-led-spot-light-bar-11000lm","title":"HELLA Black Magic 358176401 23-Inch LED Spot Light Bar","description":"\u003cp class=\"nvn-hero\"\u003eThe HELLA Black Magic 358176401 is a 23-inch, 40-LED spot light bar that throws 11,000 lumens down a tight beam. Flush-mount black housing, clear lens, and it runs on 12 or 24 volts. If you need to reach way out ahead at speed, this is the bar that does it. Mounting hardware's in the box.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eHELLA built the Black Magic line for boaters who run when it's dark and want to see trouble before they're on top of it. The 358176401 is the 23-inch spot version, and it packs 40 LEDs behind a clear lens for a full 11,000 lumens of tightly focused light. Spot beam means the light reaches far, not wide. So this is the bar you grab when you want to punch a long, bright cone out ahead of the bow instead of flooding the whole deck with glare.\u003c\/p\u003e\n\u003cp\u003eLet's talk power first, because on a boat it matters. This bar pulls 200 watts. On a 12-volt system that works out to somewhere between 6.7 and 14.6 amps depending on load and temperature, and on a 24-volt system it drops to 3.5 to 7.2 amps. That's real current, not a courtesy light. If you're running the bar more than 20 feet from the panel, size your wire for it. Eight or ten gauge is a safe call on a long run, and it deserves its own breaker or fuse sized to the draw. Undersized wire is exactly where people lose brightness and start cooking connectors. Do the wiring once and do it right, and this bar will light up the same on year five as it did on day one.\u003c\/p\u003e\n\u003cp\u003eThe 358176401 is a flush-mount design, so it recesses clean into a T-top, a hardtop, or a bow panel with just the lens face showing. The 23-inch length drops into most T-top and rail cutouts, but measure your opening twice before you cut anything. Check the clearance behind the panel too. Those 40 LEDs sit on a heat sink that needs a little breathing room to shed heat, so don't bury it hard against structure. On curved fiberglass, lay down a bead of butyl tape and back the mount with a plate. Corners are where a flush mount wants to leak over time, and a few dollars of sealant and a backing plate now saves you chasing a drip later.\u003c\/p\u003e\n\u003cp\u003eThe black housing and clear lens look sharp, and they're built to take weather. Hella's whole design philosophy is fit and forget, and these lamps earn it with sealed construction and quality materials. That said, black anodized housings and salt air have always been rivals. A dab of dielectric grease on every piece of the mounting hardware goes a long way, and a quick fresh-water rinse after a salty day keeps the finish looking new. The hardware in the box gets the job done. Plenty of folks still swap in their own stainless bolts and nylon locknuts for a little extra insurance against vibration working things loose at speed.\u003c\/p\u003e\n\u003cp\u003eSo who's this bar for? Anybody who needs reach. A spot beam throwing 11,000 lumens puts a lot of light a long way down the water, which is what you want for picking out crab pots, channel markers, or debris while you're still moving. It's about seeing what's coming, not lighting up the cockpit. If close-in flood light for docking or working the deck is what you're after, this isn't that bar, and you'd be better off pairing it with a wider flood pattern. And on a smaller boat, be honest with yourself about brightness. Eleven thousand lumens is a lot, enough to wreck your night vision if you leave it on up close, so wiring in a switch is a smart touch for the times you don't need the full punch.\u003c\/p\u003e\n\u003cp\u003eWe stock the Black Magic 358176401 because it's an honest piece of gear from a company that's been lighting boats for decades. It runs on 12 or 24 volts, ships with mounting hardware, and installs clean if you take your time on the wiring and the seal. Not sure how it'll fit your particular top or console? Give us a shout. We've rigged plenty of these.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e23-inch flush-mount light bar recesses clean into a T-top, hardtop, or bow panel with just the lens face showing\u003c\/li\u003e\n  \u003cli\u003e40 LEDs behind a clear lens deliver a full 11,000 lumens of output\u003c\/li\u003e\n  \u003cli\u003eSpot beam pattern throws light far down the water instead of flooding wide\u003c\/li\u003e\n  \u003cli\u003e200-watt draw: 6.7 to 14.6 amps on 12V and 3.5 to 7.2 amps on 24V\u003c\/li\u003e\n  \u003cli\u003eRuns on both 12-volt and 24-volt systems\u003c\/li\u003e\n  \u003cli\u003eBlack housing with sealed, fit-and-forget construction built for salt-air service\u003c\/li\u003e\n  \u003cli\u003eClear lens keeps the beam crisp and the output honest\u003c\/li\u003e\n  \u003cli\u003eMounting hardware included in the box\u003c\/li\u003e\n  \u003cli\u003e23-inch length sized to drop into common T-top and rail cutouts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat beam pattern does the 358176401 use?\u003c\/summary\u003e\n    \u003cp\u003eIt's a spot beam. That means the 11,000 lumens are focused into a tight, far-reaching cone rather than spread wide. Great for seeing well ahead at running speed, less suited to lighting up the cockpit or close-in docking.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow bright is this light bar?\u003c\/summary\u003e\n    \u003cp\u003eIt puts out 11,000 lumens from 40 LEDs. On the water that's a lot of light, enough to pick out markers, pots, and debris a long way off the bow.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it run on a 24-volt system?\u003c\/summary\u003e\n    \u003cp\u003eYes. It works on both 12 and 24 volts. On 12V it draws 6.7 to 14.6 amps, and on 24V that drops to 3.5 to 7.2 amps.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size wire and breaker should I use?\u003c\/summary\u003e\n    \u003cp\u003eThe bar pulls 200 watts, up to 14.6 amps at 12V. On runs longer than about 20 feet, step up to 8 or 10 AWG so you don't lose brightness to voltage drop, and put it on its own breaker or fuse sized to the draw.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it fit my T-top?\u003c\/summary\u003e\n    \u003cp\u003eThe bar is 23 inches long and flush-mounts, so it drops into most T-top and rail cutouts. Measure your opening before cutting, and leave a little clearance behind the panel so the LED heat sink can shed heat.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs mounting hardware included?\u003c\/summary\u003e\n    \u003cp\u003eYes, mounting hardware comes in the box. Some boaters swap in their own stainless bolts and nylon locknuts for extra vibration resistance, but the included hardware does the job.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it as a deck or docking light?\u003c\/summary\u003e\n    \u003cp\u003eIt's a spot beam, so it's built for reach rather than wide, close-in coverage. If you want to flood the deck or light up a dock, you'd want to pair it with a separate flood-pattern light.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I keep the black housing from corroding in salt air?\u003c\/summary\u003e\n    \u003cp\u003ePut a dab of dielectric grease on all the mounting hardware and give the bar a fresh-water rinse after salty runs. That keeps the finish and the fasteners looking and working like new.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it sealed for marine use?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's built with sealed construction to Hella's fit-and-forget standard, so it's made to live outside in weather and spray.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat warranty comes with it?\u003c\/summary\u003e\n    \u003cp\u003eIt carries the full Hella Marine manufacturer warranty. We're an authorized dealer, so any warranty question runs through us straight back to Hella.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eHELLA Black Magic 358176401 LED Light Bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e358176401\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e760687179641\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Source\u003c\/th\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e23 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLED Count\u003c\/th\u003e\n\u003ctd\u003e40 Clear Bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e200 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCurrent Draw at 12 Volt\u003c\/th\u003e\n\u003ctd\u003e6.7 to 14.6 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCurrent Draw at 24 Volt\u003c\/th\u003e\n\u003ctd\u003e3.5 to 7.2 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eSpot Beam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLight Output\u003c\/th\u003e\n\u003ctd\u003e11000 Lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens\u003c\/th\u003e\n\u003ctd\u003eClear Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Color\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eFlush Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Hardware\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating Voltage\u003c\/th\u003e\n\u003ctd\u003e12V \/ 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What beam pattern does the 358176401 use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a spot beam. That means the 11,000 lumens are focused into a tight, far-reaching cone rather than spread wide. Great for seeing well ahead at running speed, less suited to lighting up the cockpit or close-in docking.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How bright is this light bar?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It puts out 11,000 lumens from 40 LEDs. On the water that's a lot of light, enough to pick out markers, pots, and debris a long way off the bow.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it run on a 24-volt system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It works on both 12 and 24 volts. On 12V it draws 6.7 to 14.6 amps, and on 24V that drops to 3.5 to 7.2 amps.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size wire and breaker should I use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The bar pulls 200 watts, up to 14.6 amps at 12V. On runs longer than about 20 feet, step up to 8 or 10 AWG so you don't lose brightness to voltage drop, and put it on its own breaker or fuse sized to the draw.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it fit my T-top?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The bar is 23 inches long and flush-mounts, so it drops into most T-top and rail cutouts. Measure your opening before cutting, and leave a little clearance behind the panel so the LED heat sink can shed heat.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is mounting hardware included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, mounting hardware comes in the box. Some boaters swap in their own stainless bolts and nylon locknuts for extra vibration resistance, but the included hardware does the job.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it as a deck or docking light?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a spot beam, so it's built for reach rather than wide, close-in coverage. If you want to flood the deck or light up a dock, you'd want to pair it with a separate flood-pattern light.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I keep the black housing from corroding in salt air?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Put a dab of dielectric grease on all the mounting hardware and give the bar a fresh-water rinse after salty runs. That keeps the finish and the fasteners looking and working like new.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it sealed for marine use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's built with sealed construction to Hella's fit-and-forget standard, so it's made to live outside in weather and spray.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What warranty comes with it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It carries the full Hella Marine manufacturer warranty. We're an authorized dealer, so any warranty question runs through us straight back to Hella.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":44999112589405,"sku":"2007737","price":230.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_a03e6982-9d53-40dc-a2fc-2d579d25c584.jpg?v=1788698130","url":"https:\/\/nvnmarine.com\/products\/hella-black-magic-23-inch-led-spot-light-bar-11000lm","provider":"NVN Marine","version":"1.0","type":"link"}