Hella 858083181 18 Inch Conventional Wiper Blade, Single
Hella 858083181 18 Inch Conventional Wiper Blade, Single — Product description
The Hella 858083181 is an 18 inch conventional wiper blade with a steel frame, natural rubber edge, and a pre attached universal adapter for J-hook arms. It's sold as a single blade, so you can replace just the side that's streaking. Measure first, check your arm end, and you're a couple of minutes from a clear windshield.
If your windshield wipers are smearing, chattering, or leaving a streak right in your line of sight, the blade is almost always the culprit. This is the Hella Marine 858083181, an 18 inch conventional style wiper blade with a steel frame and a natural rubber wiping edge. It's a replacement part for a car, truck, or SUV windshield, and it's the kind of fix that takes a couple of minutes once you've got the right size in hand.
Let's get the first thing out of the way. This is a vehicle part, not a boat part. It's listed as a Single, which means you're getting one blade, not a pair. Plenty of vehicles run two different lengths up front, and some run matching blades on both sides. So before you order, check your owner's manual or measure the blade you're replacing, and buy one for each side as needed. If you need two of this size, order two.
The frame is steel, and the blade itself is natural rubber in black. That's the classic conventional design, with a jointed frame that spreads pressure along the glass through several contact points. It's a standard grade blade, so think of it as a dependable everyday replacement rather than a specialty winter or performance upgrade. We won't oversell it. If your old blade was a conventional style and it simply wore out, this is a like for like swap.
Fitment comes down to the arm. This blade ships with a pre attached universal adapter and it's made for J-hook applications. A J-hook arm ends in a small curved hook that the blade's adapter slides over. Look at the end of your wiper arm before you buy. If it's a hook, you're in the right place. If it's a pin, a side lock, or a bayonet style end, this isn't the blade for that arm, and you'll want to check that connection first. Because the adapter is already on the blade, you don't have to dig through a bag of loose plastic pieces to find the right one.
Installing it is simple. Lift the wiper arm away from the glass until it locks upright. Press the tab on the old blade, slide it off the hook, and slide the new one on until it clicks. Lower the arm gently, because letting it snap back against the windshield is a good way to crack the glass. Then run the wipers with washer fluid and watch the first few passes. A clean sweep with no chatter means you're done.
A few habits will stretch the life of any rubber blade. Wipe the edge with a damp cloth when you wash the vehicle, since grit and road film wear the rubber faster than rain does. Don't run the wipers on a dry windshield. In freezing weather, free the blades from the glass before you switch them on, because tearing a frozen edge off the windshield nicks the rubber. And if the vehicle sits in the sun all summer, expect the rubber to harden sooner. Most drivers swap blades once or twice a year, and a streak across your field of view is your cue.
One more thing worth knowing. Wiper blades are cheap compared to the cost of driving blind in a downpour, so don't wait for a failure. If you're replacing one side, it's smart to look at the other blade too. Rubber ages at about the same rate on both sides, and a fresh blade next to a tired one gives you uneven sweeps. Buying a second Single is easy, and it means both sides of the windshield clear the same way.
Hella is a name boaters and drivers both know, and this blade comes through our authorized reseller channel with the full manufacturer warranty behind it. It's a straightforward part. Get the length right, confirm the J-hook arm, and you'll be seeing clearly again in minutes.
Key Features
- 18 inch blade length for a straightforward like for like replacement on the matching wiper arm
- Conventional style steel frame that spreads wiping pressure along the glass
- Natural rubber blade in black for a clean, quiet sweep on a healthy windshield
- Pre attached universal adapter so there are no loose parts to sort through
- Built for J-hook wiper arms, so check your arm end before you order
- Sold as a Single, one blade per order, which is handy when only one side is worn
- Standard grade everyday replacement that's easy to install in a couple of minutes
Why Buy from NVN Marine
- Authorized Hella Marine reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | 18 Inch, Conventional Style, Steel Frame, Natural Rubber Blade, Black, Standard, Single, With Pre Attached Universal Adapter, For J-Hook Applications |
|---|---|
| Brand | Hella Marine |
| Manufacturer Part Number | 858083181 |
| UPC | 760687142799 |
| Blade Length | 18 Inch |
| Blade Style | Conventional |
| Frame Material | Steel |
| Blade Material | Natural Rubber |
| Blade Color | Black |
| Grade | Standard |
| Quantity | Single |
| Adapter | Pre Attached Universal Adapter |
| Arm Connection | J-Hook |
| Manufacturer | Hella |
Frequently asked questions
What size is this wiper blade?
It's an 18 inch blade. That's the blade length listed by the distributor, so measure your current blade from end to end to confirm it matches before you order.
Is this a single blade or a set?
It's a Single, which means one blade. If your vehicle needs two blades of this length, order two.
What kind of wiper arm does it fit?
It's made for J-hook applications and comes with a pre attached universal adapter. Check the end of your wiper arm. If it's a curved hook, this blade is intended for it.
Does it fit pin type, side lock, or bayonet arms?
This listing is for J-hook applications. If your arm has a different end, confirm the connection type first, because we don't list this blade for other arm styles.
Is this a boat part or a vehicle part?
It's a vehicle windshield wiper blade. We carry it because Hella Marine is the vendor, but it's meant for a car, truck, or SUV windshield.
What is the blade made of?
The wiping blade is natural rubber in black, mounted in a steel frame with a conventional style design.
Do I need extra adapters?
No. The universal adapter comes pre attached to the blade, so you can slide it onto a J-hook arm without hunting for loose pieces.
What does standard grade mean here?
It's the distributor's grade designation for this blade. Think of it as a solid everyday replacement rather than a specialty or performance blade.
How do I know what length my vehicle needs?
Check your owner's manual or measure the blade on the vehicle now. Many vehicles use different lengths on the driver and passenger sides.
How often should I replace wiper blades?
Most drivers replace them once or twice a year. Streaking, chattering, or a hazy sweep means it's time.
Does it come with the manufacturer warranty?
Yes. We're an authorized reseller, so the full manufacturer warranty applies.