{"product_id":"hella-858083161-16-inch-wiper-blade-j-hook-single","title":"Hella 858083161 16-Inch Wiper Blade, J-Hook Single","description":"\u003cp class=\"nvn-hero\"\u003eThe Hella 858083161 is a 16-inch conventional windshield wiper blade, sold as a single. Steel frame, graphite-coated natural rubber, and a pre-attached universal adapter for J-hook arms. A straightforward, fit-and-forget replacement blade that clips on in a couple of minutes, no tools needed.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Hella 858083161 is a 16-inch conventional windshield wiper blade, sold as a single blade. It's the tried-and-true style of wiper you've seen on cars and trucks for decades. A steel frame, a natural rubber wiping edge, and a pre-attached universal adapter that clips onto a J-hook arm. No gimmicks. Just a clean sweep across the glass.\u003c\/p\u003e\n\u003cp\u003eConventional blades like this one use a jointed steel frame with several pressure points along the length of the blade. That spreads the arm's spring tension evenly so the rubber stays in contact with the curve of your windshield from one end to the other. A 16-inch blade is on the shorter end of the common range, so it often shows up as a passenger-side or rear blade on mid-size vehicles and as a front blade on compacts. Always check your own vehicle's blade sizes before you order, since the two sides are frequently different lengths.\u003c\/p\u003e\n\u003cp\u003eThe wiping element is natural rubber with a graphite coating. That coating matters more than it sounds. It lets the edge glide quietly instead of chattering and skipping, and it helps the rubber flip cleanly on each pass so you don't get that annoying smear line right in your field of view. A quiet, clean wipe is the whole point, and the graphite is what gets you there.\u003c\/p\u003e\n\u003cp\u003eHella built an aerodynamic profile into the frame. At highway speed, air pressure wants to lift a wiper off the glass, and when that happens you lose contact and the blade just hovers over the water instead of clearing it. The shape here directs airflow downward to keep the blade pressed down where it belongs. You notice it most in a hard rain at 65 mph, when a cheaper blade starts to float.\u003c\/p\u003e\n\u003cp\u003eInstallation is about as easy as it gets. The blade ships with the universal adapter already attached, set up for J-hook wiper arms, which is the most common arm type on the road. You lift the arm off the glass, release the old blade, slide this one on until it clicks, and lower the arm back down. Two, three minutes. You don't need any tools, and you don't need to touch the arm itself.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone replacing a worn 16-inch blade who wants a dependable conventional wiper without overthinking it. If your current blade is streaking, chattering, leaving a film, or the rubber's cracked and peeling, it's time. Wiper rubber is a wear item. Most blades are done at six months to a year depending on your climate, sun exposure, and how much grit they drag around.\u003c\/p\u003e\n\u003cp\u003eA couple of honest notes. This is a single blade, not a pair, so if both of your wipers are shot you'll want two. And this is the standard conventional style, built for J-hook arms. If your vehicle uses a bayonet, pin, or side-lock arm, confirm the fitment first. The pre-attached adapter covers the common J-hook setup, which is what the vast majority of cars and light trucks run.\u003c\/p\u003e\n\u003cp\u003eTaking care of a new blade buys you more life out of it. Wipe the rubber edge down with a damp cloth when you clean your windshield, and keep the glass itself clean so the blade isn't grinding dust across it. Never run dry wipers on a dusty windshield, that's the fastest way to tear up a fresh edge. And lift the arms off the glass in a hard freeze instead of peeling a frozen blade loose. Do that and a good rubber element like this one holds up season after season.\u003c\/p\u003e\n\u003cp\u003eThe Hella name has been on lighting and wiper components for a long time, and the standard wiper line is the quiet, dependable part of the catalog. It isn't trying to be a fancy beam blade. It's a correctly made conventional blade at a fair price, the kind of part you put on and then forget about until the next change. For a lot of drivers that's exactly what you want from a wiper. Nothing clever, just clear glass when the weather turns.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e16-inch blade length, a common passenger-side or compact front-wiper size (always confirm against your vehicle before ordering)\u003c\/li\u003e\n  \u003cli\u003eConventional jointed steel frame spreads arm tension across multiple pressure points for even contact along the whole blade\u003c\/li\u003e\n  \u003cli\u003eNatural rubber wiping edge with a graphite coating for quiet, chatter-free passes and a clean flip each stroke\u003c\/li\u003e\n  \u003cli\u003eAerodynamic frame profile directs airflow downward to keep the blade planted on the glass at highway speed\u003c\/li\u003e\n  \u003cli\u003ePre-attached universal adapter fits J-hook wiper arms, the most common arm type on cars and light trucks\u003c\/li\u003e\n  \u003cli\u003eTool-free installation, clips on in two to three minutes with no need to touch the arm\u003c\/li\u003e\n  \u003cli\u003eSold as a single blade, so you can replace just the side that's worn\u003c\/li\u003e\n  \u003cli\u003eStandard-grade Hella replacement blade, a straightforward fit-and-forget wiper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size is this wiper blade?\u003c\/summary\u003e\n    \u003cp\u003eIt's 16 inches. Measure your old blade tip to tip or check your owner's manual to confirm, since the driver and passenger sides are often different lengths.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a single blade or a pair?\u003c\/summary\u003e\n    \u003cp\u003eA single. It's one 16-inch blade. If both of your wipers are worn, you'll need two.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat kind of wiper arm does it fit?\u003c\/summary\u003e\n    \u003cp\u003eJ-hook arms, the most common type on cars and light trucks. The universal adapter comes pre-attached and set up for that connection. If your vehicle uses a bayonet, pin, or side-lock arm, confirm fitment first.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need tools to install it?\u003c\/summary\u003e\n    \u003cp\u003eNo. Lift the arm off the glass, release the old blade, slide this one on until it clicks, then lower the arm back down. Two or three minutes, no tools.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the frame made of?\u003c\/summary\u003e\n    \u003cp\u003eSteel. It's a conventional jointed frame with several pressure points to keep even contact across the curve of your windshield.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the blade made of?\u003c\/summary\u003e\n    \u003cp\u003eNatural rubber with a graphite coating. The coating helps it wipe quietly and flip cleanly so you don't get a smear line in your field of view.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy does it have an aerodynamic shape?\u003c\/summary\u003e\n    \u003cp\u003eTo keep the blade from lifting off the glass at highway speed. The profile directs air pressure downward so the rubber stays in contact in hard rain.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long will the blade last?\u003c\/summary\u003e\n    \u003cp\u003eWiper rubber is a wear item. Most blades go six months to a year depending on climate, sun, and grit. Streaking, chattering, or a cracked edge means it's time to replace it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a beam-style or conventional blade?\u003c\/summary\u003e\n    \u003cp\u003eConventional. It uses the classic jointed steel frame rather than a one-piece beam design.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is the blade?\u003c\/summary\u003e\n    \u003cp\u003eBlack.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the manufacturer part number?\u003c\/summary\u003e\n    \u003cp\u003eThe part number is 858083161.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eHella 858083161 16-Inch Conventional Wiper Blade, Single, J-Hook\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eHella\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e858083161\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e760687142775\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade Style\u003c\/th\u003e\n\u003ctd\u003eConventional\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFrame Material\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade Material\u003c\/th\u003e\n\u003ctd\u003eNatural Rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade Color\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrade\u003c\/th\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003ctd\u003ePre-attached universal adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eArm Connection\u003c\/th\u003e\n\u003ctd\u003eJ-Hook\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size is this wiper blade?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's 16 inches. Measure your old blade tip to tip or check your owner's manual to confirm, since the driver and passenger sides are often different lengths.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a single blade or a pair?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A single. It's one 16-inch blade. If both of your wipers are worn, you'll need two.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What kind of wiper arm does it fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"J-hook arms, the most common type on cars and light trucks. The universal adapter comes pre-attached and set up for that connection. If your vehicle uses a bayonet, pin, or side-lock arm, confirm fitment first.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need tools to install it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. Lift the arm off the glass, release the old blade, slide this one on until it clicks, then lower the arm back down. Two or three minutes, no tools.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the frame made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Steel. It's a conventional jointed frame with several pressure points to keep even contact across the curve of your windshield.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the blade made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Natural rubber with a graphite coating. The coating helps it wipe quietly and flip cleanly so you don't get a smear line in your field of view.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why does it have an aerodynamic shape?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"To keep the blade from lifting off the glass at highway speed. The profile directs air pressure downward so the rubber stays in contact in hard rain.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long will the blade last?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Wiper rubber is a wear item. Most blades go six months to a year depending on climate, sun, and grit. Streaking, chattering, or a cracked edge means it's time to replace it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a beam-style or conventional blade?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Conventional. It uses the classic jointed steel frame rather than a one-piece beam design.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is the blade?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Black.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the manufacturer part number?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The part number is 858083161.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":67599893626973,"sku":"2011206","price":7.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_14e69180-ad9e-49bd-98c7-39f5616dd06e.jpg?v=1790978437","url":"https:\/\/nvnmarine.com\/products\/hella-858083161-16-inch-wiper-blade-j-hook-single","provider":"NVN Marine","version":"1.0","type":"link"}