{"product_id":"hella-450-h3-driving-lamp-55w-clear-marine-universal","title":"Hella 450 H3 Driving Lamp 55W Clear | Marine \u0026 Universal","description":"\u003cp class=\"nvn-hero\"\u003eThe Hella 450 is a compact rectangular driving lamp that throws a long, clean beam down the water or the road ahead. It runs a standard 55W H3 clear bulb, mounts on a single universal stud, and ships with the bulb and hardware in the box. SAE and ECE approved, so it's legal and ready to wire in.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Hella 450 is a compact rectangular driving lamp, 3.5 by 6.3 inches, built around a standard H3 halogen bulb. It runs 55 watts on 12 volts and throws a driving beam, which means a long, tight pattern that reaches well down the water or the road in front of you. The lens is a clear lined design that spreads the light just enough to stay useful without washing it out. And the whole thing mounts on a single universal stud, so it drops onto just about any flat surface with one hole and a wrench.\u003c\/p\u003e\n\u003cp\u003eWhere does a lamp like this earn its keep? On a small center console or a RIB, mounted forward, it's a solid spotlight for picking up a mooring ball, a channel marker, or the dock when you're coming in late. On a truck, a tractor, or a work rig, it's a straightforward driving or work light. The driving beam is built to reach, so it's at its best pointed forward as a spot. One honest note: a far-reaching beam like this can bounce glare back at you off chop or fog, so it's not the lamp you want as a general nav or area light. Aim it down the path, not across the deck.\u003c\/p\u003e\n\u003cp\u003eWiring is simple, but do it right. A 55 watt bulb on a 12 volt system pulls right around 4.6 amps. That's enough that you don't want it running through a dash switch on its own. Wire it through a relay with a 10 amp fuse on the feed, trigger the relay off your switch, and you'll keep the heat out of your helm wiring. It's the difference between a lamp that lasts and a melted switch two seasons in. If you're running a pair, size the fuse and wire accordingly.\u003c\/p\u003e\n\u003cp\u003eThe mount is a universal stud, which keeps the install flexible but asks for a little planning. On a solid bracket or a steel bumper, thread it down and go. On thin fiberglass, like a console top or a bow section, back it up with a plate or a fender washer underneath. A single stud on unsupported glass will flex over time and can craze the gelcoat around it. Five minutes of backing keeps that from ever being a problem.\u003c\/p\u003e\n\u003cp\u003eHousing is ABS with a clear lined lens. It's a practical, replaceable lamp, not a sealed forever-unit, so if you're running it in salt spray, treat it like any exposed fitting. Rinse it down after a wet run, and a bead of marine sealant around the lens edge keeps water out over the long haul. The real advantage of the H3 format is that the bulb is a standard, widely stocked size. When it eventually burns out, you pull the old one and drop in a fresh H3. You're not chasing a proprietary part.\u003c\/p\u003e\n\u003cp\u003eA quick word on the bulb, since it's the most common question. This is a 12 volt H3 lamp, not a 6 volt one, so it's a match for standard automotive and marine electrical systems. The H3 is a single-filament halogen with a short flying lead, and it's one of the most common fog and driving bulb formats out there. If you ever want to swap in a different H3 output or a fresh clear bulb, it's a drop-in, no rewiring needed. Just keep it to a 55 watt H3 so your relay and fuse stay correctly sized.\u003c\/p\u003e\n\u003cp\u003eEach unit ships as a single lamp with the H3 bulb and the mounting hardware in the box. It's SAE and ECE approved, so it meets the common road and marine lighting standards you'd want on a forward-facing lamp. If you need coverage on both sides, order two. For anyone who wants a simple, serviceable, long-reach halogen lamp that you can mount almost anywhere and fix with a hardware-store bulb, the Hella 450 is an easy call.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eH3 halogen bulb rated 55 watts on 12 volts for a bright, warm forward light\u003c\/li\u003e\n  \u003cli\u003eDriving beam pattern throws a long, tight reach, ideal aimed forward as a spot\u003c\/li\u003e\n  \u003cli\u003e3.5 by 6.3 inch rectangular body fits tight mounting spots on consoles and bumpers\u003c\/li\u003e\n  \u003cli\u003eClear lined lens spreads the beam evenly without washing out the reach\u003c\/li\u003e\n  \u003cli\u003eABS housing stands up to weather and vibration in marine and vehicle use\u003c\/li\u003e\n  \u003cli\u003eUniversal stud mount installs on almost any flat surface with a single hole\u003c\/li\u003e\n  \u003cli\u003eSAE and ECE approved to meet common road and marine lighting standards\u003c\/li\u003e\n  \u003cli\u003eStandard H3 bulb format means easy, low-cost replacement almost anywhere\u003c\/li\u003e\n  \u003cli\u003eShips as a single lamp with the H3 bulb and mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Hella Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the bulb included with the lamp?\u003c\/summary\u003e\n    \u003cp\u003eYes. Each Hella 450 ships as a single lamp with the H3 halogen bulb and the mounting hardware in the box. You just wire it in and mount it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat type of bulb is an H3 bulb?\u003c\/summary\u003e\n    \u003cp\u003eThe H3 is a single-filament halogen bulb with a short flying lead, one of the most common fog and driving light formats. This lamp uses a 12 volt, 55 watt H3.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is a 12V 55W H3 halogen light bulb?\u003c\/summary\u003e\n    \u003cp\u003eIt's the bulb this lamp runs on. 12 volts to match a standard automotive or marine system, and 55 watts of draw in the common H3 halogen format. It pulls about 4.6 amps.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhere can I find replacement H3 bulbs?\u003c\/summary\u003e\n    \u003cp\u003eH3 is a widely stocked size, so a replacement is easy to find at any auto parts counter or right here at NVN Marine. Keep it to a 55 watt H3 so your wiring stays correctly sized.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat can I use as a substitute for an H3 bulb?\u003c\/summary\u003e\n    \u003cp\u003eStick with an H3. It's a specific base and filament design, and other bulb types won't seat or aim correctly in this housing. A fresh 55 watt H3 is the right swap.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a spot or a driving beam?\u003c\/summary\u003e\n    \u003cp\u003eIt's a driving beam, which is a long, reaching pattern. Aim it forward as a spot for the best result. It's not meant to be a wide area or nav light.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need a relay to wire it?\u003c\/summary\u003e\n    \u003cp\u003eWe recommend it. A 55 watt bulb pulls around 4.6 amps, which is more than most dash switches want to carry. Wire it through a relay with a 10 amp fuse and trigger the relay from your switch.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount?\u003c\/summary\u003e\n    \u003cp\u003eOn a single universal stud. Thread it through one hole in a bracket, bumper, or console. On thin fiberglass, add a backing plate or fender washer so the stud doesn't flex the surface.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it approved for road and marine use?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's SAE and ECE approved, the common lighting standards for forward-facing lamps.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this one lamp or a pair?\u003c\/summary\u003e\n    \u003cp\u003eOne. Each order is a single lamp. If you want lights on both sides, order two.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it on a boat?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's a Hella Marine lamp with an ABS housing. Rinse it after salt spray and seal the lens edge, and it'll hold up as a forward spotlight on a small boat or RIB.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eHella 450 Rectangular H3 Halogen Driving Lamp, 55W\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHella Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e005860231\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e4082300584943\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBulb Type\u003c\/th\u003e\n\u003ctd\u003eH3 Halogen\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e55 Watt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Pattern\u003c\/th\u003e\n\u003ctd\u003eDriving Beam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLens\u003c\/th\u003e\n\u003ctd\u003eClear Lined Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Material\u003c\/th\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eUniversal Stud Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLamp Size\u003c\/th\u003e\n\u003ctd\u003e3.5 x 6.3 in Rectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eSAE \/ ECE\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eBulb and Mounting Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eSingle Light\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the bulb included with the lamp?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Each Hella 450 ships as a single lamp with the H3 halogen bulb and the mounting hardware in the box. You just wire it in and mount it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What type of bulb is an H3 bulb?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The H3 is a single-filament halogen bulb with a short flying lead, one of the most common fog and driving light formats. This lamp uses a 12 volt, 55 watt H3.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is a 12V 55W H3 halogen light bulb?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the bulb this lamp runs on. 12 volts to match a standard automotive or marine system, and 55 watts of draw in the common H3 halogen format. It pulls about 4.6 amps.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Where can I find replacement H3 bulbs?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"H3 is a widely stocked size, so a replacement is easy to find at any auto parts counter or right here at NVN Marine. Keep it to a 55 watt H3 so your wiring stays correctly sized.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What can I use as a substitute for an H3 bulb?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Stick with an H3. It's a specific base and filament design, and other bulb types won't seat or aim correctly in this housing. A fresh 55 watt H3 is the right swap.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a spot or a driving beam?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a driving beam, which is a long, reaching pattern. Aim it forward as a spot for the best result. It's not meant to be a wide area or nav light.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need a relay to wire it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"We recommend it. A 55 watt bulb pulls around 4.6 amps, which is more than most dash switches want to carry. Wire it through a relay with a 10 amp fuse and trigger the relay from your switch.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"On a single universal stud. Thread it through one hole in a bracket, bumper, or console. On thin fiberglass, add a backing plate or fender washer so the stud doesn't flex the surface.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it approved for road and marine use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's SAE and ECE approved, the common lighting standards for forward-facing lamps.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this one lamp or a pair?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"One. Each order is a single lamp. If you want lights on both sides, order two.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it on a boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's a Hella Marine lamp with an ABS housing. Rinse it after salt spray and seal the lens edge, and it'll hold up as a forward spotlight on a small boat or RIB.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":45076276281437,"sku":"2009474","price":28.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_0f5a187a-140d-419b-ad96-20619d3fba78.jpg?v=1789875759","url":"https:\/\/nvnmarine.com\/products\/hella-450-h3-driving-lamp-55w-clear-marine-universal","provider":"NVN Marine","version":"1.0","type":"link"}