{"product_id":"garmin-dogbone-stabilizer-for-spy-pole-force-pro","title":"Garmin Dogbone Stabilizer for Spy Pole | Force Pro","description":"\u003cp class=\"nvn-hero\"\u003eThe Garmin Dogbone Stabilizer securely braces your Spy pole to a Force or Force Pro trolling motor while still letting the pole rotate and adjust height independently. It's required whenever you run two transducers on the pole, keeping everything steady without giving up movement.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eAdding a Spy pole to a Force or Force Pro trolling motor puts a lot of length and weight out on the bow, and that assembly needs to be braced or it moves around in ways you don't want. The Garmin Dogbone Stabilizer is the part that handles it. It securely braces the Spy pole to your Force or Force Pro trolling motor, so the whole setup stays steady and controlled instead of flexing and swinging.\u003c\/p\u003e\n\u003cp\u003eThe clever part is that it braces without locking you down. Even with the stabilizer in place, the Spy pole can still rotate independently and you can still adjust the shaft height. That's important, because the whole point of the Spy pole is aiming your live sonar where you want it and setting the transducer at the right depth. A brace that killed that movement would defeat the purpose. This one holds the assembly firm while leaving you full control of rotation and height. You get stability and adjustability at the same time.\u003c\/p\u003e\n\u003cp\u003eThere's a specific case where this part isn't optional. The stabilizer is required on the Spy pole whenever two transducers are installed on the pole. Running two transducers adds real weight and reach out at the end of the pole, and without the dogbone bracing it back to the trolling motor, that load is too much for the pole to carry cleanly. If you're setting up a dual-transducer Spy pole, plan on this stabilizer being part of the build, not an accessory you might skip. It's what makes the two-transducer configuration work.\u003c\/p\u003e\n\u003cp\u003eEven with a single transducer, the stabilizer earns its place. Bracing the pole to the motor cuts down on the vibration and sway that come with a long pole on a moving boat, and less movement means a steadier sonar image and less stress on your mounts over time. Anything hard-mounted on the bow of a boat that pounds through chop benefits from being properly braced, and a live-sonar pole carrying an expensive transducer is exactly the kind of thing you want held firm.\u003c\/p\u003e\n\u003cp\u003eIt's a purpose-built part, which matters here. The dogbone is shaped and sized to connect a Spy pole to a Force or Force Pro specifically, so it fits the geometry of those components and braces at the right points. Trying to improvise stability with generic hardware tends to either restrict the movement you need or fail to brace where the load actually is. This does both jobs right because it was designed for exactly this combination. The package is long and slim, around 15 by 3 by 3 inches at about 1.05 pounds, which is the shape you'd expect from a brace bar that spans from the pole to the motor.\u003c\/p\u003e\n\u003cp\u003eInstall is a matter of connecting the stabilizer between the Spy pole and the trolling motor per the setup for your configuration. Once it's in place, confirm the pole still rotates freely and adjusts height the way it should, since that movement is the point. It's a good idea to check the connection points after your first few hard-running days too, the way you would with any hard-mounted bow gear, since a boat pounding through chop works on every fastener over time. A quick look now and then keeps the brace tight and doing its job. Who's this for? Anyone running a Garmin Spy pole on a Force or Force Pro trolling motor who wants a steadier, better-braced setup, and specifically anyone running two transducers on the pole, where the stabilizer is required. If you've built out a serious live-sonar bow with a Spy pole, this is the piece that keeps it solid without taking away the movement that makes the pole worth having.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSecurely braces the Spy pole to a Force or Force Pro trolling motor\u003c\/li\u003e\n  \u003cli\u003eAllows independent pole rotation and shaft height adjustment\u003c\/li\u003e\n  \u003cli\u003eRequired whenever two transducers are installed on the Spy pole\u003c\/li\u003e\n  \u003cli\u003eReduces vibration and sway for a steadier sonar image\u003c\/li\u003e\n  \u003cli\u003ePurpose-built dogbone shape sized for the Spy pole and Force motors\u003c\/li\u003e\n  \u003cli\u003eBraces the load without restricting the movement you need\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Garmin reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the Dogbone Stabilizer do?\u003c\/summary\u003e\n    \u003cp\u003eIt securely braces your Spy pole to a Force or Force Pro trolling motor so the assembly stays steady, while still allowing the pole to rotate and adjust height independently.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhen is it required?\u003c\/summary\u003e\n    \u003cp\u003eIt's required on the Spy pole whenever two transducers are installed on the pole. The extra weight and reach of two transducers need the dogbone bracing back to the trolling motor.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it affect my sonar image?\u003c\/summary\u003e\n    \u003cp\u003eIndirectly, yes, in a good way. By cutting vibration and sway on the pole, it helps keep the transducer steadier, which makes for a cleaner, more stable live sonar picture, especially in chop.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it stop the pole from rotating?\u003c\/summary\u003e\n    \u003cp\u003eNo. It braces the assembly for stability but still lets the Spy pole rotate independently and lets you adjust the shaft height, so you keep full control of aiming and depth.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need it with only one transducer?\u003c\/summary\u003e\n    \u003cp\u003eIt's not required with a single transducer, but it still helps. Bracing the pole to the motor cuts vibration and sway for a steadier image and less stress on your mounts.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does it work with?\u003c\/summary\u003e\n    \u003cp\u003eIt's built to brace a Garmin Spy pole to a Force or Force Pro trolling motor, matching the geometry of those components.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy not use generic hardware to stabilize the pole?\u003c\/summary\u003e\n    \u003cp\u003eImprovised bracing tends to either restrict the rotation and height movement you need, or fail to brace where the load actually is. The dogbone is designed for this exact combination, so it does both jobs right.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it hard to install?\u003c\/summary\u003e\n    \u003cp\u003eNo. You connect the stabilizer between the Spy pole and the trolling motor per your configuration, then confirm the pole still rotates and adjusts height freely.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eGarmin Dogbone Stabilizer for Spy Pole\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eGarmin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e010-13404-50\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e753759373474\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.05 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackage Dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e15 x 3 x 3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eBraces Spy pole to trolling motor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAllows\u003c\/th\u003e\n\u003ctd\u003eIndependent rotation and shaft height adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRequired For\u003c\/th\u003e\n\u003ctd\u003eTwo-transducer Spy pole setups\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible With\u003c\/th\u003e\n\u003ctd\u003eGarmin Force and Force Pro trolling motors\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFor Use With\u003c\/th\u003e\n\u003ctd\u003eGarmin Spy pole\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eTrolling Motor Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the Dogbone Stabilizer do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It securely braces your Spy pole to a Force or Force Pro trolling motor so the assembly stays steady, while still allowing the pole to rotate and adjust height independently.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"When is it required?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's required on the Spy pole whenever two transducers are installed on the pole. The extra weight and reach of two transducers need the dogbone bracing back to the trolling motor.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it affect my sonar image?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Indirectly, yes, in a good way. By cutting vibration and sway on the pole, it helps keep the transducer steadier, which makes for a cleaner, more stable live sonar picture, especially in chop.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it stop the pole from rotating?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It braces the assembly for stability but still lets the Spy pole rotate independently and lets you adjust the shaft height, so you keep full control of aiming and depth.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need it with only one transducer?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's not required with a single transducer, but it still helps. Bracing the pole to the motor cuts vibration and sway for a steadier image and less stress on your mounts.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does it work with?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built to brace a Garmin Spy pole to a Force or Force Pro trolling motor, matching the geometry of those components.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why not use generic hardware to stabilize the pole?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Improvised bracing tends to either restrict the rotation and height movement you need, or fail to brace where the load actually is. The dogbone is designed for this exact combination, so it does both jobs right.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it hard to install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. You connect the stabilizer between the Spy pole and the trolling motor per your configuration, then confirm the pole still rotates and adjusts height freely.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Garmin","offers":[{"title":"Default Title","offer_id":44723713081437,"sku":"113477","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/113477XL.jpg?v=1784341800","url":"https:\/\/nvnmarine.com\/products\/garmin-dogbone-stabilizer-for-spy-pole-force-pro","provider":"NVN Marine","version":"1.0","type":"link"}