Garmin Dogbone Stabilizer for Spy Pole | Force Pro

Adding a Spy pole to a Force or Force Pro trolling motor puts a lot of length and weight out on the bow, and that assembly needs to be braced or it moves around in ways you don't want. The Garmin Dogbone Stabilizer is the part that handles it. It securely braces the Spy pole to your Force or Force Pro trolling motor, so the whole setup stays steady and controlled instead of flexing and swinging.

The clever part is that it braces without locking you down. Even with the stabilizer in place, the Spy pole can still rotate independently and you can still adjust the shaft height. That's important, because the whole point of the Spy pole is aiming your live sonar where you want it and setting the transducer at the right depth. A brace that killed that movement would defeat the purpose. This one holds the assembly firm while leaving you full control of rotation and height. You get stability and adjustability at the same time.

There's a specific case where this part isn't optional. The stabilizer is required on the Spy pole whenever two transducers are installed on the pole. Running two transducers adds real weight and reach out at the end of the pole, and without the dogbone bracing it back to the trolling motor, that load is too much for the pole to carry cleanly. If you're setting up a dual-transducer Spy pole, plan on this stabilizer being part of the build, not an accessory you might skip. It's what makes the two-transducer configuration work.

Even with a single transducer, the stabilizer earns its place. Bracing the pole to the motor cuts down on the vibration and sway that come with a long pole on a moving boat, and less movement means a steadier sonar image and less stress on your mounts over time. Anything hard-mounted on the bow of a boat that pounds through chop benefits from being properly braced, and a live-sonar pole carrying an expensive transducer is exactly the kind of thing you want held firm.

It's a purpose-built part, which matters here. The dogbone is shaped and sized to connect a Spy pole to a Force or Force Pro specifically, so it fits the geometry of those components and braces at the right points. Trying to improvise stability with generic hardware tends to either restrict the movement you need or fail to brace where the load actually is. This does both jobs right because it was designed for exactly this combination. The package is long and slim, around 15 by 3 by 3 inches at about 1.05 pounds, which is the shape you'd expect from a brace bar that spans from the pole to the motor.

Install is a matter of connecting the stabilizer between the Spy pole and the trolling motor per the setup for your configuration. Once it's in place, confirm the pole still rotates freely and adjusts height the way it should, since that movement is the point. It's a good idea to check the connection points after your first few hard-running days too, the way you would with any hard-mounted bow gear, since a boat pounding through chop works on every fastener over time. A quick look now and then keeps the brace tight and doing its job. Who's this for? Anyone running a Garmin Spy pole on a Force or Force Pro trolling motor who wants a steadier, better-braced setup, and specifically anyone running two transducers on the pole, where the stabilizer is required. If you've built out a serious live-sonar bow with a Spy pole, this is the piece that keeps it solid without taking away the movement that makes the pole worth having.