{"product_id":"garmin-adjustable-handheld-mount-flat-surface","title":"Garmin Adjustable Handheld Mount | Flat Surface","description":"\u003cp class=\"nvn-hero\"\u003eThe Garmin Adjustable Handheld Mount gives your compatible handheld device a secure home on any flat surface. It adjusts so you can set the viewing angle you want, whether that's on the dash, a desk, or a wall at the cabin.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eA handheld GPS or satellite communicator is only useful when you can actually see it and reach it. Set it loose on the dash and it slides around, ends up face down, or takes a dive the first time you hit a wake. The Garmin Adjustable Handheld Mount fixes that. It secures your compatible handheld device to any flat surface and lets you adjust the angle so the screen faces you the way you want it.\u003c\/p\u003e\n\u003cp\u003eThe idea is simple and that's the appeal. You pick a flat spot that makes sense, the helm, a bulkhead, a desk at home, the wall by the door where you grab your gear on the way out, and you mount it there. The device clicks into place and stays put. The adjustable angle means you're not stuck with whatever tilt the surface gives you. Point it up toward your eyes when it's low, angle it back when it's high, get it readable without craning your neck.\u003c\/p\u003e\n\u003cp\u003eThink about where a handheld actually earns a permanent home. On a boat, a fixed mount at the helm keeps your GPS or communicator visible and within reach instead of rolling around in a cup holder. At a hunting or off-grid cabin, a wall mount by the door keeps your inReach where you'll remember to grab it and where it can maintain a clear view of the sky to catch messages. On a desk, it props the device up so you can read it and keep it charging in one spot. One mount covers a lot of ground.\u003c\/p\u003e\n\u003cp\u003eA couple of honest notes so you get it set up right the first time. Screws are not included, so grab the appropriate fasteners for whatever surface you're mounting to. That's normal for a flat-surface mount since the right screw depends entirely on what you're driving it into, wood, fiberglass, drywall, or metal all want something different. Plan that part before you start.\u003c\/p\u003e\n\u003cp\u003eCompatibility is the other thing to get right. This mount holds a compatible Garmin handheld device directly, but two specific devices need an adapter. If you're mounting an inReach Mini 3, you'll need a compatible Spine Mount Adapter, which is sold separately. If you're mounting an inReach Messenger, you'll need a compatible Cradle Mount, also sold separately. Check which device you have before you order so you can grab the adapter at the same time and not get stopped halfway through the install. For other compatible handhelds, the mount holds the device on its own.\u003c\/p\u003e\n\u003cp\u003eInstall is quick once you've got your fasteners and any needed adapter. Pick your flat surface, mark and drive your screws, set the angle, and click the device in. That's it. Because it mounts to any flat surface, you're not limited to a dashboard, you can put one at the helm, one at the cabin, and one on the desk if you move a device between them a lot. It's an inexpensive way to turn a handheld from something that rattles around into something that has a real, readable, reachable home wherever you need it.\u003c\/p\u003e\n\u003cp\u003eOne more practical point. Because it holds the device at a set, readable angle, it's genuinely useful for keeping an eye on a screen you check often, like a satellite communicator waiting on a message or a GPS tracking a route. A device flat on its back is easy to ignore. A device propped up and facing you is one you'll actually glance at, and that's half the value of having it mounted in the first place.\u003c\/p\u003e\n\u003cp\u003eWho's it for? Anyone running a compatible Garmin handheld who's tired of it sliding around loose. Boaters who want their GPS or communicator fixed and visible at the helm. Hunters and off-grid folks who want their inReach mounted and ready by the door. If you've got the device, this is the simple accessory that makes it genuinely usable day to day.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSecures a compatible Garmin handheld device to any flat surface\u003c\/li\u003e\n  \u003cli\u003eAdjustable angle so you can set the screen where it's easy to read\u003c\/li\u003e\n  \u003cli\u003eWorks on a dash, bulkhead, wall, or desk, wherever you need it\u003c\/li\u003e\n  \u003cli\u003einReach Mini 3 requires a compatible Spine Mount Adapter (sold separately)\u003c\/li\u003e\n  \u003cli\u003einReach Messenger requires a compatible Cradle Mount (sold separately)\u003c\/li\u003e\n  \u003cli\u003eScrews not included, so you can match the fastener to your surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Garmin reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does this mount attach to?\u003c\/summary\u003e\n    \u003cp\u003eAny flat surface. You can mount it to a dash, a bulkhead, a wall, or a desk, wherever you want your handheld visible and within reach.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I adjust the viewing angle?\u003c\/summary\u003e\n    \u003cp\u003eYes. The mount is adjustable, so you can tilt the device to face you rather than being stuck with whatever angle the surface gives you.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre screws included?\u003c\/summary\u003e\n    \u003cp\u003eNo, screws are not included. That's normal for a flat-surface mount, since the right fastener depends on whether you're mounting to wood, fiberglass, drywall, or metal. Grab the appropriate screws for your surface.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it work with the inReach Mini 3?\u003c\/summary\u003e\n    \u003cp\u003eYes, but the inReach Mini 3 requires a compatible Spine Mount Adapter, which is sold separately. Order the adapter along with the mount so you can install it in one go.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it work with the inReach Messenger?\u003c\/summary\u003e\n    \u003cp\u003eYes, but the inReach Messenger requires a compatible Cradle Mount, sold separately. Get the cradle at the same time as the mount.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo all handhelds need an adapter?\u003c\/summary\u003e\n    \u003cp\u003eNo. The mount holds compatible Garmin handhelds directly. Only the inReach Mini 3 (Spine Mount Adapter) and the inReach Messenger (Cradle Mount) need a separate adapter. Check your device before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it hard to install?\u003c\/summary\u003e\n    \u003cp\u003eNot at all. Pick your flat surface, drive your screws, set the angle, and click the device in. The only planning is grabbing the right fasteners and any needed adapter first.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it at home and not just on a boat?\u003c\/summary\u003e\n    \u003cp\u003eAbsolutely. It mounts to any flat surface, so a lot of folks put one at the helm and another at the cabin or on a desk. It's a handy way to keep a handheld readable and charging in a fixed spot.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eGarmin Adjustable Handheld Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eGarmin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e010-13992-00\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e753759361440\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.20 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackage Dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e5 x 4 x 2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Surface\u003c\/th\u003e\n\u003ctd\u003eAny flat surface\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAngle\u003c\/th\u003e\n\u003ctd\u003eAdjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eScrews Included\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003einReach Mini 3\u003c\/th\u003e\n\u003ctd\u003eRequires Spine Mount Adapter (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003einReach Messenger\u003c\/th\u003e\n\u003ctd\u003eRequires Cradle Mount (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eGPS Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does this mount attach to?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Any flat surface. You can mount it to a dash, a bulkhead, a wall, or a desk, wherever you want your handheld visible and within reach.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I adjust the viewing angle?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The mount is adjustable, so you can tilt the device to face you rather than being stuck with whatever angle the surface gives you.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are screws included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, screws are not included. That's normal for a flat-surface mount, since the right fastener depends on whether you're mounting to wood, fiberglass, drywall, or metal. Grab the appropriate screws for your surface.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it work with the inReach Mini 3?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, but the inReach Mini 3 requires a compatible Spine Mount Adapter, which is sold separately. Order the adapter along with the mount so you can install it in one go.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it work with the inReach Messenger?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, but the inReach Messenger requires a compatible Cradle Mount, sold separately. Get the cradle at the same time as the mount.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do all handhelds need an adapter?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The mount holds compatible Garmin handhelds directly. Only the inReach Mini 3 (Spine Mount Adapter) and the inReach Messenger (Cradle Mount) need a separate adapter. Check your device before ordering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it hard to install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Not at all. Pick your flat surface, drive your screws, set the angle, and click the device in. The only planning is grabbing the right fasteners and any needed adapter first.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it at home and not just on a boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Absolutely. It mounts to any flat surface, so a lot of folks put one at the helm and another at the cabin or on a desk. It's a handy way to keep a handheld readable and charging in a fixed spot.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Garmin","offers":[{"title":"Default Title","offer_id":44723353583709,"sku":"111887","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/111887XL.jpg?v=1784325020","url":"https:\/\/nvnmarine.com\/products\/garmin-adjustable-handheld-mount-flat-surface","provider":"NVN Marine","version":"1.0","type":"link"}