Egis PowerBar Three 600A Busbar, M10 Studs
Egis PowerBar Three 600A Busbar, M10 Studs — Product description
The Egis PowerBar Three is a 600A busbar that distributes power from a single feed across three M10 (3/8 inch) studs. It's part of the Egis FLEX system, so it stacks cleanly with your other FLEX components. Stainless self-locking hardware keeps connections tight, and the clear break-away cover lets you eyeball terminals without pulling anything apart.
If you're running a busy helm or a battery bank with a lot of loads hanging off it, you need a clean way to land all those cables. The Egis PowerBar Three gives you three M10 studs fed from one busbar, rated to 600A. That's enough headroom for inverters, windlasses, and the heavy stuff, not just accessory circuits.
The whole thing is built to live on a boat. The hardware is stainless steel and self-locking, so it won't back off with vibration and won't corrode on you. The footprint is compact, which matters when you're fitting it behind a console or in a tight battery compartment where there's never enough room.
It ships with a clear protective cover that has break-away tabs. You get the safety of a covered bar, but you can still inspect your terminals at a glance without unbolting anything. And because it's part of the Egis FLEX system, the height lines up with other FLEX components if you're building out a full distribution setup.
Key Features
- 600A rating gives you headroom for inverters, windlasses, and other high-draw loads, not just accessory circuits
- Three M10 (3/8 inch) studs distribute power from a single busbar, so you land all your heavy cables in one place
- Stainless steel self-locking hardware resists corrosion and won't loosen under vibration
- Clear protective cover with break-away tabs lets you inspect terminals without removing it
- Compact footprint fits tight battery compartments and behind-console installs, and height-matches other Egis FLEX components
Why Buy from NVN Marine
- Authorized Egis Mobile Electronics reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | EGIS PowerBar Three M10 (3/8) Studs - 600A w/Cover Retail Pack |
|---|---|
| Brand | Egis Mobile Electronics |
| Manufacturer Part Number | 6601-300 |
| UPC | 850074331506 |
| Model | 6601-300 |
| Current Rating | 600A |
| Stud Size | M10 (3/8 in) |
| Number of Studs | 3 |
| Hardware | Stainless Steel Self-Locking |
| Protective Cover | Transparent with break-away tabs |
| System Compatibility | Egis FLEX System |
| Category | Electrical |
Frequently asked questions
What's the current rating on the PowerBar Three?
It's rated to 600A, so it handles high-draw loads like inverters and windlasses, not just light accessory circuits.
What size are the studs?
Three M10 studs, which is the 3/8 inch size. All three are fed from the single busbar.
Does it come with a cover?
Yes. It ships with a clear protective cover that has break-away tabs, so you can inspect the terminals without pulling the cover off.
Is the hardware corrosion resistant?
The hardware is stainless steel and self-locking, which handles life on the water and resists loosening from vibration.
Does it work with other Egis FLEX components?
Yes. The height is designed to match other FLEX system components, so it stacks cleanly in a full distribution build.
