Egis Mobile Electric

Egis MT Series 9+3 Sealed Fuse Block w/Ground Busbar

SKU: 114308 · UPC: 850067590125 · MPN: 3493
★★★★★ 4.7 · 0 reviews
Authorized dealer
$85.29
or 4 payments of $21.32 with Affirm · See disclosures
Low stock — 2 left — Ships today Pickup Monday · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$85.29
02 · Overview

Egis MT Series 9+3 Sealed Fuse Block w/Ground Busbar — Product description

The Egis MT Series 9+3 Sealed Fuse Block gives you 12 protected circuits and a 250 amp ground bus in one sealed, IP66 rated package. Plug-in Deutsch and Amphenol connectors replace screw terminals, so your wiring stays tight out on the water. It's a clean, serious way to distribute power on a boat.

Most boat electrical problems start at a connection. A screw terminal that backed off, a lug that picked up salt, a wire that got tugged during a refit. The Egis MT Series 9+3 Sealed Fuse Block is built to take most of that off the table. It's a 12 position ATM fuse and circuit breaker block with a 250 amp ground bus built right in, and the outputs land on keyed Deutsch and Amphenol power connectors instead of bare screws. You plug the harness in. It only goes one way.

The 9+3 in the name tells you how the block is laid out. You get 12 positions with a split input, so you can feed the two groups separately. That's handy when you want to keep, say, your navigation and electronics circuits apart from the pumps and lighting. Total output current is rated at 250 amps, and each position takes a fuse or breaker up to 30 amps. There are also 4 spare fuse slots stored under the cover, so a blown fuse out on the water doesn't mean a trip back to the dock.

Sealing is the real selling point. The protective cover fully seals the block against moisture, salt, and corrosion, and the whole assembly is rated IP66 and IP6K9K. High temperature materials mean you can mount it just about anywhere, including an engine space or a bilge-adjacent locker where an open fuse panel would be a bad idea. It's also ignition protected per SAE J1171, which matters if the block lives anywhere near fuel or fumes. Stainless steel studs and self-locking flanged nuts handle the heavy cable connections, so they won't loosen up from vibration.

The integrated ground bus sits under its own protective cover and is rated at 250 amps. It takes a lot of cables, including the return cable back to battery negative. That means you can ground your whole run of new circuits in one tidy spot instead of building a bus out of loose parts. The mounting holes are large and accept 1/4-20 or M6 hardware, so it goes down with whatever you've got in the toolbox.

One thing we like on a refit is that the block works with both ATM fuses and ATM Type III circuit breakers, and you can still close the sealing cover over either. Want resettable protection on a few circuits and plain fuses on the rest? Go ahead and mix them. A label on the cover gives you a spot to name each fused circuit or breaker, so the next person (or you, two seasons from now) knows exactly what's what.

If your system grows, so can this block. It's designed to connect with other Egis power management parts, including XD relays and high-ampere fuse blocks, using busbars for a plug and play install. Dual, Triple, and Quad Link Busbars are the expansion path here, and they're sold separately from this block. That's a good fit for boat builders and serious DIYers who'd rather plan a clean power distribution layout once than keep adding one-off fixes.

Who's it for? Anyone wiring a new boat, rewiring an old one, or adding a bank of accessories where reliability counts. It protects add-on circuits from accidental shorts to frame ground or battery negative, and from overload events. What it isn't is a high-amp main feed protector. Each position tops out at 30 amps, so heavy loads like a windlass or bow thruster still need their own dedicated protection. Match the fuse to the wire, size your cable for the load, and this block will do its job quietly for years. And because the connectors are keyed, a future service call is a lot less guesswork. Egis backs it with a 5 year warranty.

Key Features

  • 12 position 9+3 split input block, so you can feed two groups of circuits separately
  • Accepts ATM fuses and ATM Type III circuit breakers, and the sealing cover still closes over either
  • Keyed Deutsch and Amphenol power connectors for plug-in harness termination instead of screw terminals
  • Sealed to IP66 and IP6K9K, with a protective cover that keeps out moisture, salt, and corrosion
  • Integrated 250 amp ground busbar under its own cover, with room for a return cable to battery negative
  • 250 amp total output current, up to 30 amps per fuse or breaker position
  • Ignition protected per SAE J1171 for use near fuel and fumes
  • Stainless steel studs and self-locking flanged nuts that stay put under vibration
  • 4 spare fuse slots stored under the cover for fixes out on the water
  • Cover label area to name each fuse or breaker circuit
  • Expands with Egis busbars, XD relays, and high-ampere fuse blocks
  • Large mounting holes take 1/4-20 or M6 hardware, backed by a 5 year warranty

Why Buy from NVN Marine

  • Authorized Egis Mobile Electric reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Monday) $85.29
03 · The numbers

Technical specifications

Title Egis MT Series 9+3 Sealed Fuse Block w/Ground Busbar
Brand Egis Mobile Electric
Manufacturer Part Number 3493
UPC 850067590125
Series MT Series
Positions 12 (9+3 split input)
Fuse / Breaker Type ATM fuse / ATM Type III circuit breaker
Total Output Current 250 A
Max Fuse / CB Value 30 A
Ground Return Bus 250 A
Ingress Protection IP66 / IP6K9K
Ignition Protection Per SAE J1171 Yes
Output Connectors Deutsch / Amphenol power connectors
Hardware Stainless steel studs and self-locking flanged nuts
Spare Fuse Slots 4 (stored under cover)
Mounting Hole Size Accepts 1/4-20 / M6 hardware
Warranty 5 Years
04 · Before you buy

Frequently asked questions

What does 9+3 mean on this fuse block?

It's 12 positions split into a group of 9 and a group of 3 with a split input. You can feed each group from its own source, which lets you separate different sets of circuits.

What's the maximum fuse or breaker size per position?

30 amps per position. Total output current for the block is 250 amps, so keep your overall load within that.

Can I use circuit breakers instead of fuses?

Yes. The block takes both ATM fuses and ATM Type III circuit breakers, and the sealing cover still fits over either one.

How waterproof is it?

It's sealed to IP66 and IP6K9K with the protective cover in place, so it's built to handle moisture, salt, and corrosion in harsh marine conditions.

Is the ground busbar rated for heavy cables?

The integrated ground bus is rated at 250 amps and supports many cables, including a return cable to battery negative. It sits under its own protective cover.

Is it ignition protected?

Yes, it's ignition protected per SAE J1171, so it's suited to spaces where fuel vapors could be a concern.

Are there spare fuse slots?

Yes. 4 spare fuse slots are stored under the cover so you've got replacements on hand.

What size hardware do I need to mount it?

The large mounting holes accept 1/4-20 or M6 hardware. Pick whichever you've got.

Can I expand it later?

Yes. It's compatible with Egis power management parts, including XD relays and high-ampere fuse blocks, using Dual, Triple, and Quad Link Busbars. Those are sold separately.

Does it come with the output harness or busbars?

We don't have a box-contents list for this block, so don't assume harness connectors or link busbars are included. Plan on sourcing mating connectors and any busbars separately.

What's the warranty?

Egis lists a 5 year warranty on this block, and we're an authorized reseller so claims are handled the normal way.

05 · Customer voices

Customer reviews