Egis MT Series 3+9 Sealed Fuse Block w/Ground Busbar
Egis MT Series 3+9 Sealed Fuse Block w/Ground Busbar — Product description
The Egis MT Series 3+9 Sealed Fuse Block gives you 12 protected circuits and a 250 amp ground busbar in one sealed, connectorized package. Keyed Deutsch and Amphenol connectors replace screw terminals, so your wiring stays tight and dry on the water.
If you've ever chased a dead circuit on a boat because a screw terminal backed off or corroded, you already know why this block exists. The Egis MT Series 3+9 Sealed Fuse Block with Ground Busbar (model 3439) swaps loose screw terminations for sealed, keyed connectors, so the connection you make on the bench is the connection you've got on the water.
It's a 12 position block with a split input. Three circuits sit on one side and nine on the other, which lets you feed two groups of loads from separate sources without building a second panel. Total output current is rated at 250 amps. Each position takes an ATM fuse or an ATM Type III circuit breaker, up to 30 amps per position. The fuses and breakers are sold separately, so plan your spares and your loads before you order.
The protective sealing cover is the part that matters most out there. It fully seals the block against moisture, salt and corrosion, and it still fits when you've loaded the block with fuses or breakers. The block is sealed to IP66 and IP6K9K, and the high temperature materials mean you can mount it in an engine compartment, a bilge-side locker, or behind a console without worrying much about the heat or the spray. Large mounting holes take 1/4-20 or M6 hardware, so it's easy to fasten down on whatever bulkhead you've got.
Connections are made with integrated Deutsch and Amphenol power connectors. They're keyed, so they only go together one way, and plug-in termination takes the guesswork out of a screw-down install. That's a real help on a production line, and it's just as handy in a home garage when you're rewiring a center console on a Saturday. The cable lug studs are stainless steel, and the nuts are self-locking flanged stainless, which keeps vibration from loosening things over a season of pounding through chop.
Underneath a second protective cover you'll find an integrated ground busbar rated at 250 amps. It handles many cables, including the return cable to battery negative, so your grounds land in one tidy spot instead of scattered across the boat. That's a good idea on any rig with electronics, pumps, lights and a stereo all sharing the same negative.
There's also storage built in. Four spare fuse slots are stored under the cover, so a blown fuse at the dock doesn't mean a trip to the parts store. A label on the protective cover lets you name each fused circuit or breaker, and you'll thank yourself for that the first time you're troubleshooting in the dark. Ignition protection per SAE J1171 is listed as yes, which matters for gas engine compartments.
The block is also expandable. It works with Egis power management components, including XD relays and high-ampere fuse blocks, using dual, triple and quad link busbars for plug-and-play connections. Start with one block now and grow the system later without ripping out what you've already wired. The block also protects add-on circuits from accidental shorts to frame ground or battery negative, and from overload events.
Who's it for? Boat builders and serious DIY owners who want a clean, sealed distribution point for a new build or a full rewire. Think center console fishing boats, bay boats, pontoons, and cruisers that run a lot of accessory circuits. It's a good fit anywhere you'd rather plug a circuit in than tighten a screw, and it's built to be mounted nearly anywhere on the boat. Egis describes the MT Series sealed connectorized fuse and circuit breaker block as an industry first, and the integrated connectors are meant to cut down on the assembly mistakes that come with traditional screw terminations. It's backed by a 5 year warranty, and our crew can help you sort out which fuses or breakers to pair with it.
Key Features
- 12 position 3+9 split input layout, so you can feed two groups of loads from separate sources
- 250 amp total output current rating for a full set of accessory circuits
- Sealed to IP66 and IP6K9K, which keeps moisture, salt and spray out of the connections
- Protective sealing cover stays fully sealed while fuses or breakers are installed
- Integrated Deutsch and Amphenol keyed connectors, so there are no screw terminals to loosen
- Takes ATM fuses and ATM Type III circuit breakers up to 30 amps per position
- Built-in 250 amp ground busbar under its own cover, with room for the battery negative return cable
- Stainless steel studs and self-locking flanged stainless nuts resist corrosion and vibration
- Four spare fuse slots stored under the cover for quick repairs
- Cover label area for naming each circuit
- Expands with Egis dual, triple and quad link busbars, XD relays and high-ampere fuse blocks
- Ignition protection per SAE J1171 and a 5 year warranty
Why Buy from NVN Marine
- Authorized Egis Mobile Electric reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Egis MT Series 3+9 Sealed Fuse Block w/Ground Busbar |
|---|---|
| Brand | Egis Mobile Electric |
| Manufacturer Part Number | 3439 |
| UPC | 850067590118 |
| Positions | 12 (3+9 split input) |
| Fuse Type | ATM fuse or ATM Type III circuit breaker |
| Max Fuse / CB Value (Amps) | 30 |
| Total Output Current (Amps) | 250 |
| Ground Return Bus (Amps) | 250 |
| Ingress Protection | IP66 / IP6K9K |
| Ignition Protection Per SAE J1171 | Yes |
| Connectors | Integrated Deutsch / Amphenol power connectors |
| Hardware | Stainless steel studs and self-locking flanged nuts |
| Mounting Hardware | 1/4-20 / M6 |
| Spare Fuse Slots | 4 |
| Weight | 1.42 lbs |
| Package Dimensions (L x W x H) | 8 x 6 x 3 in |
| Warranty | 5 Years |
Frequently asked questions
What does 3+9 mean on this fuse block?
It's a split input design with 12 positions total. Three positions are on one side and nine are on the other, so you can feed two groups of circuits separately.
Are fuses or circuit breakers included?
No. Fuses and circuit breakers are sold separately. The block accepts ATM fuses and ATM Type III circuit breakers.
What's the maximum fuse or breaker size per position?
The maximum fuse or circuit breaker value is 30 amps per position.
What's the total output current rating?
Total output current is rated at 250 amps.
How much current can the ground busbar carry?
The integrated ground busbar is rated at 250 amps. It sits under a protective cover and supports many cables, including a return cable to battery negative.
Is it waterproof?
It's sealed to IP66 and IP6K9K. The protective sealing cover fully seals the block against moisture, salt and corrosion, and it still fits with fuses or breakers installed.
Can I use circuit breakers and still close the sealing cover?
Yes. The block is compatible with ATM Type III circuit breakers while still allowing use of the sealing cover.
What hardware do I use to mount it?
The large mounting holes accept 1/4-20 or M6 attachment hardware.
Does it come with spare fuse slots?
Yes. There are four spare fuse slots stored under the cover.
Can I expand the system later?
Yes. It's compatible with Egis power management system components, including XD relays and high-ampere fuse blocks, using dual, triple and quad link busbars.
Is it ignition protected?
Yes, ignition protection per SAE J1171 is listed as yes.
What's the warranty?
The manufacturer lists a 5 year warranty.