{"product_id":"egis-atm-mini-20-amp-circuit-breaker-type-3","title":"Egis ATM\/MINI 20 AMP Circuit Breaker, Type 3 (4720-20)","description":"\u003cp class=\"nvn-hero\"\u003eThe Egis ATM\/MINI 20 AMP Circuit Breaker is a compact Type 3 manual push-to-reset breaker rated 32V DC, so it works on 12V and 24V boat systems. It's a resettable swap for a mini blade fuse, with a 20 amp rating that suits branch circuits like electronics, lighting, and stereo feeds.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you've ever chased a dead stereo or a flickering nav light back to a blown fuse behind a hatch, you already know why a resettable breaker earns its spot. The Egis ATM\/MINI 20 AMP Circuit Breaker (4720-20) does the same job as a mini blade fuse, except you push a button instead of digging for a spare. It's a Type 3, manual push-to-reset design, and it fits the small ATM\/Mini blade footprint.\u003c\/p\u003e\n\u003cp\u003eHere's what that means in practice. Type 3 means the breaker trips on an overload and stays open until someone resets it by hand. It won't clear itself and quietly re-energize a faulted circuit while you're not looking. On a boat, that's the behavior you want. A fault should get your attention, not hide.\u003c\/p\u003e\n\u003cp\u003eThe 32 volt DC maximum rating covers both 12 volt and 24 volt systems, so the same part works on a center console with a single battery or a larger boat running a 24 volt house bank. The 20 amp continuous rating puts it squarely in branch-circuit territory. Think a fishfinder or chartplotter feed, a VHF radio, a stereo head unit, cabin lighting, or a bilge blower circuit that's been sized for 20 amps. It's not meant for big windlass or thruster loads. Those need heavy-duty protection close to the battery.\u003c\/p\u003e\n\u003cp\u003eThe ATM\/Mini footprint is compact. Egis says these extremely compact breakers significantly reduce the space needed for resettable circuit protection in mobile electrical systems, and that's the real selling point when you're working inside a crowded helm panel or a small distribution module. One thing to check before you order: this breaker is built for holders and modules designed around mini blades. It won't seat in a standard-size blade slot, so confirm what's in your panel first.\u003c\/p\u003e\n\u003cp\u003eA few install notes from the bench. Match the breaker to the wire, not the other way around. A 20 amp breaker belongs on wire that can safely carry 20 amps for the full run, so check your gauge and your run length before you pick the rating. If the wire's too thin, the breaker won't protect it the way you expect. Most real-world failures in this class aren't the breaker itself. They're poor crimps, green corrosion at the blades, and voltage drop on long runs. Use quality terminals, seal exposed connections, and you'll get years out of it.\u003c\/p\u003e\n\u003cp\u003eBecause it resets with a push, it's also a handy troubleshooting tool. If it trips once after you add a new accessory, you've got a clue about the load. If it trips again right after you reset it, stop and find the short. Don't keep pushing the button. A breaker that keeps tripping is telling you something, and the fix is in the wiring, not in a bigger breaker.\u003c\/p\u003e\n\u003cp\u003eWho's it for? Anyone rewiring a helm, adding accessories, or tidying up an older fuse panel. Maybe you've got a skiff where every fuse swap means a wet knee and a flashlight in your teeth. A resettable breaker takes that hassle away. Label the circuit, note the amp rating on your wiring diagram, and the next person to open the panel, which might be you in two seasons, will know exactly what they're looking at.\u003c\/p\u003e\n\u003cp\u003eEgis Mobile Electric has been building electrical protection and power gear for over 25 years, covering marine applications along with emergency fleets and other specialty vehicles. This 20 amp part is one of a family of ATM\/Mini breakers in matching amp ratings, so you can protect each circuit with the right size and keep the whole panel consistent.\u003c\/p\u003e\n\u003cp\u003eIt's a simple part with a clear job. Fast to install, easy to reset, and compact enough to fit where a bigger breaker won't. If you're swapping out fuses in a mini blade panel or building a new accessory circuit, this is a tidy way to do it.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e20 amp continuous current rating, sized for branch circuits like electronics, lighting, and stereo feeds\u003c\/li\u003e\n  \u003cli\u003e32V DC maximum voltage, so it works on both 12V and 24V DC systems\u003c\/li\u003e\n  \u003cli\u003eType 3 manual push-to-reset operation, so a tripped circuit stays open until you reset it\u003c\/li\u003e\n  \u003cli\u003eATM\/Mini blade footprint saves space in crowded helm panels and small distribution modules\u003c\/li\u003e\n  \u003cli\u003eResettable, so there's no hunting for a spare fuse behind a hatch\u003c\/li\u003e\n  \u003cli\u003eEgis Mobile Electric design, built for marine and mobile electrical systems\u003c\/li\u003e\n  \u003cli\u003eManufacturer part number 4720-20, easy to match to your panel or parts list\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.1 lbs, so it adds almost nothing to a crowded panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Egis Mobile Electric reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does Type 3 mean on this circuit breaker?\u003c\/summary\u003e\n    \u003cp\u003eType 3 means manual push-to-reset operation. After an overload trips the breaker, it stays open until someone resets it by hand. It won't reset itself and re-energize a faulted circuit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use this breaker on a 12V and a 24V system?\u003c\/summary\u003e\n    \u003cp\u003eYes. It has a 32V DC maximum voltage rating, which supports both 12V and 24V DC systems.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size is the ATM\/Mini footprint?\u003c\/summary\u003e\n    \u003cp\u003eATM\/Mini is the compact mini blade footprint. This breaker is meant for holders and modules built for mini blades, so check that your panel or fuse block accepts that style before you order.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it fit a standard-size blade fuse slot?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's built for the ATM\/Mini footprint, so it won't seat in a standard-size blade slot. Confirm what your panel uses.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the continuous current rating?\u003c\/summary\u003e\n    \u003cp\u003eThis part is rated for 20 amps continuous current.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat kinds of circuits is a 20 amp breaker good for?\u003c\/summary\u003e\n    \u003cp\u003eIt suits branch circuits such as a fishfinder or chartplotter feed, VHF radio, stereo, or lighting, provided the wire is rated for 20 amps over the whole run. For big loads like windlasses or thrusters, you'll need heavier protection.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I choose between amp ratings in this line?\u003c\/summary\u003e\n    \u003cp\u003ePick the rating based on the wire, not the load alone. The breaker should trip before the wire is overloaded. Egis offers the ATM\/Mini breaker in several amp ratings, such as 5, 7.5, 15, 20, and 25 amps.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat should I do if the breaker keeps tripping?\u003c\/summary\u003e\n    \u003cp\u003eDon't keep resetting it. Repeated trips mean there's a short or an overloaded circuit. Check the wiring and the connected device, then reset once the problem's fixed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the weight of this breaker?\u003c\/summary\u003e\n    \u003cp\u003eListed weight is 0.1 lbs.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eEgis ATM\/MINI 20 AMP Circuit Breaker - Type 3\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEgis Mobile Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e4720-20\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e850053879838\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eElectrical | Circuit Breakers\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCurrent Rating\u003c\/th\u003e\n\u003ctd\u003e20 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eContinuous Current Rating\u003c\/th\u003e\n\u003ctd\u003e20 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Voltage\u003c\/th\u003e\n\u003ctd\u003e32V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible System Voltage\u003c\/th\u003e\n\u003ctd\u003e12V and 24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBreaker Type\u003c\/th\u003e\n\u003ctd\u003eType 3\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReset Type\u003c\/th\u003e\n\u003ctd\u003eManual Push-to-Reset\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFootprint\u003c\/th\u003e\n\u003ctd\u003eATM\/Mini\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does Type 3 mean on this circuit breaker?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Type 3 means manual push-to-reset operation. After an overload trips the breaker, it stays open until someone resets it by hand. It won't reset itself and re-energize a faulted circuit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use this breaker on a 12V and a 24V system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It has a 32V DC maximum voltage rating, which supports both 12V and 24V DC systems.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size is the ATM\/Mini footprint?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"ATM\/Mini is the compact mini blade footprint. This breaker is meant for holders and modules built for mini blades, so check that your panel or fuse block accepts that style before you order.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it fit a standard-size blade fuse slot?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's built for the ATM\/Mini footprint, so it won't seat in a standard-size blade slot. Confirm what your panel uses.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the continuous current rating?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This part is rated for 20 amps continuous current.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What kinds of circuits is a 20 amp breaker good for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It suits branch circuits such as a fishfinder or chartplotter feed, VHF radio, stereo, or lighting, provided the wire is rated for 20 amps over the whole run. For big loads like windlasses or thrusters, you'll need heavier protection.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I choose between amp ratings in this line?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Pick the rating based on the wire, not the load alone. The breaker should trip before the wire is overloaded. Egis offers the ATM\/Mini breaker in several amp ratings, such as 5, 7.5, 15, 20, and 25 amps.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What should I do if the breaker keeps tripping?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Don't keep resetting it. Repeated trips mean there's a short or an overloaded circuit. Check the wiring and the connected device, then reset once the problem's fixed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the weight of this breaker?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Listed weight is 0.1 lbs.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Egis Mobile Electric","offers":[{"title":"Default Title","offer_id":68114093146205,"sku":"113744","price":7.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/113744XL.jpg?v=1795207903","url":"https:\/\/nvnmarine.com\/products\/egis-atm-mini-20-amp-circuit-breaker-type-3","provider":"NVN Marine","version":"1.0","type":"link"}