{"product_id":"egis-a-series-10a-panel-mount-breaker-3201-10","title":"Egis A-Series 10A Panel Mount Breaker | 3201-10","description":"\u003cp class=\"nvn-hero\"\u003eThe Egis A-Series 3201-10 is a 10 amp single pole circuit breaker in a clean white toggle body. It's a magnetic-hydraulic design, so it trips on true current instead of heat, and it drops straight into any standard A-Series or C-Series panel cutout. Small part, big job.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Egis A-Series 3201-10 is a 10 amp single pole circuit breaker built for the kind of panel work we do every week. It's a magnetic-hydraulic design in a clean white toggle body, and it drops straight into a standard panel cutout. If you're wiring up a DC distribution panel or protecting an AC branch circuit, this is the little switch that stands between a nuisance and a burned harness. It's a small part with a big job.\u003c\/p\u003e\n\u003cp\u003eHere's what sets a magnetic-hydraulic breaker apart from the cheap thermal kind. It trips on actual current, not on heat. A thermal breaker uses a bimetal strip that reacts to temperature, so a hot engine room can make it trip early and a cold morning can let it ride past its rating. The 3201-10 doesn't care. It's rated to stay accurate from -40 to 185 degrees Fahrenheit. So the breaker you set at 10 amps trips at 10 amps, whether you're running the Gulf in August or tied up at a Great Lakes marina in November.\u003c\/p\u003e\n\u003cp\u003eThis one's rated for 277 volts AC and 80 volts DC, which covers just about every circuit on a boat and plenty on a work truck. DC house loads, bilge pumps, electronics feeds, and 120 or 240 AC shore-power branches all fall inside that window. The toggle doubles as an on\/off switch, so you can kill a circuit at the panel without pulling a fuse. That's handy when you're chasing a gremlin and want to isolate one leg at a time.\u003c\/p\u003e\n\u003cp\u003eAnd because it's a manual-reset breaker, a trip isn't the end of your day. There's no digging through a spares box for the right fuse. You find the fault, fix it, flip the toggle back up, and you're running again. Out on the water, that difference matters. A fuse that blows at 2 AM ten miles out is a real problem. A breaker you just reset is a footnote.\u003c\/p\u003e\n\u003cp\u003eThe mounting is where Egis made this easy. It's a toggle panel mount that fits any standard panel already cut for A-Series or C-Series magnetic-hydraulic breakers. So whether you're adding a circuit to an existing Egis panel or building a new one, the cutout is the same. Connections land on No. 10-32 screw terminals, and it ships with stainless steel self-locking hardware, so your ring terminals stay tight through years of vibration. Egis even includes the mounting screws. Small thing, but it means you're not making a second trip to the hardware store halfway through an install.\u003c\/p\u003e\n\u003cp\u003eDon't let the size fool you. This breaker has real interrupting muscle, 5,000 amps at 277 volts AC and 1,500 amps at 80 volts DC. That matters when you're protecting a circuit tied to a large paralleled battery bank, where a dead short can dump a frightening amount of current in an instant. A breaker with low interrupt capacity can weld itself shut or fail dangerously under that kind of fault. This one is built to open cleanly and safely. It's also rated for 6,000 operating cycles at full load, so it holds up whether it's an everyday switch or a set-and-forget protector.\u003c\/p\u003e\n\u003cp\u003eIt meets UL 1077, the standard for supplementary protectors, so it's the right part for protecting individual branch circuits inside a larger system. We reach for these on center-console rebuilds, sailboat DC panels, and fleet-vehicle upfits, anywhere you want per-circuit protection that resets with a flip instead of a fuse swap. Egis backs it with a 4 year warranty. For a part this critical, that kind of coverage tells you they trust their own build. And if you're not sure a 10 amp rating is right for your circuit, give us a shout. We'll help you size it to your wire gauge and load. Get the breaker rating matched to the wire, not the load's peak draw, and you'll avoid nuisance trips.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e10 amp continuous current rating, single pole, sized for individual DC and AC branch circuits\u003c\/li\u003e\n  \u003cli\u003eMagnetic-hydraulic design trips on true current, not heat, so it stays accurate from -40 to 185 degrees Fahrenheit\u003c\/li\u003e\n  \u003cli\u003eRated for 277V AC and 80V DC, covering DC house loads and AC shore-power branch circuits\u003c\/li\u003e\n  \u003cli\u003eManual-reset toggle doubles as an on\/off switch, so you isolate a circuit without pulling a fuse\u003c\/li\u003e\n  \u003cli\u003eHigh interrupt capacity, 5,000 amps at 277V AC and 1,500 amps at 80V DC for large battery-bank circuits\u003c\/li\u003e\n  \u003cli\u003eToggle panel mount fits any standard panel cut for Egis A-Series or C-Series breakers\u003c\/li\u003e\n  \u003cli\u003eNo. 10-32 screw terminals with stainless steel self-locking hardware for connections that stay tight through vibration\u003c\/li\u003e\n  \u003cli\u003eMeets UL 1077 and rated for 6,000 operating cycles at full load\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting screws and carries a 4 year Egis warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Egis Mobile Electric reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does magnetic-hydraulic mean, and why does it matter?\u003c\/summary\u003e\n    \u003cp\u003eIt means the breaker trips on actual current instead of heat. A thermal breaker uses a bimetal strip that reacts to temperature, so ambient heat or cold shifts when it trips. The 3201-10 holds its 10 amp trip point accurately from -40 to 185 degrees Fahrenheit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use this on both AC and DC circuits?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's rated for 277 volts AC and 80 volts DC, so it works on DC house loads and 120 or 240 AC shore-power branch circuits alike.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it work as an on\/off switch too?\u003c\/summary\u003e\n    \u003cp\u003eIt does. The toggle lets you manually open and close the circuit at the panel, so you can isolate a leg without pulling a fuse or a wire.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat terminals does it use?\u003c\/summary\u003e\n    \u003cp\u003eNo. 10-32 screw terminals. It comes with stainless steel self-locking hardware and mounting screws, so your ring terminals stay tight through vibration.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it fit my existing Egis panel?\u003c\/summary\u003e\n    \u003cp\u003eIf your panel is cut for Egis A-Series or C-Series magnetic-hydraulic breakers, yes. The panel-mount cutout is the same across the series.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat happens when it trips?\u003c\/summary\u003e\n    \u003cp\u003eIt's a manual-reset breaker. Find and fix the fault, then flip the toggle back up to restore the circuit. There's no spare fuse to hunt for.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the interrupt capacity?\u003c\/summary\u003e\n    \u003cp\u003e5,000 amps at 277V AC and 1,500 amps at 80V DC. That high interrupt rating is what lets it safely protect circuits fed by large paralleled battery banks.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it rated for marine use?\u003c\/summary\u003e\n    \u003cp\u003eYes. It meets UL 1077 for supplementary protection and is built for the temperature and vibration you see on a boat, from -40 to 185 degrees Fahrenheit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long will it last?\u003c\/summary\u003e\n    \u003cp\u003eEgis rates it for 6,000 operating cycles at full load and backs it with a 4 year warranty.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eEgis A-Series 10 Amp Toggle Panel Mount Circuit Breaker 3201-10\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEgis Mobile Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e3201-10\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e850074331094\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eContinuous Current\u003c\/th\u003e\n\u003ctd\u003e10 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Voltage\u003c\/th\u003e\n\u003ctd\u003e277V AC \/ 80V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBreaker Type\u003c\/th\u003e\n\u003ctd\u003eSingle Pole Magnetic-Hydraulic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReset Type\u003c\/th\u003e\n\u003ctd\u003eManual Reset\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eToggle Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminal\u003c\/th\u003e\n\u003ctd\u003eNo. 10-32 Screw Terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e-40 to 185 Degrees Fahrenheit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Hardware\u003c\/th\u003e\n\u003ctd\u003eStainless Steel Self-Locking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRegulatory Compliance\u003c\/th\u003e\n\u003ctd\u003eUL 1077\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eElectrical Endurance\u003c\/th\u003e\n\u003ctd\u003e6,000 Cycles at Rated Current\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInterrupt Capacity\u003c\/th\u003e\n\u003ctd\u003e5kA at 277V AC, 1.5kA at 80V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePanel Compatibility\u003c\/th\u003e\n\u003ctd\u003eA-Series and C-Series Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e4 Year\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does magnetic-hydraulic mean, and why does it matter?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It means the breaker trips on actual current instead of heat. A thermal breaker uses a bimetal strip that reacts to temperature, so ambient heat or cold shifts when it trips. The 3201-10 holds its 10 amp trip point accurately from -40 to 185 degrees Fahrenheit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use this on both AC and DC circuits?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's rated for 277 volts AC and 80 volts DC, so it works on DC house loads and 120 or 240 AC shore-power branch circuits alike.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it work as an on\/off switch too?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It does. The toggle lets you manually open and close the circuit at the panel, so you can isolate a leg without pulling a fuse or a wire.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What terminals does it use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. 10-32 screw terminals. It comes with stainless steel self-locking hardware and mounting screws, so your ring terminals stay tight through vibration.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it fit my existing Egis panel?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"If your panel is cut for Egis A-Series or C-Series magnetic-hydraulic breakers, yes. The panel-mount cutout is the same across the series.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What happens when it trips?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a manual-reset breaker. Find and fix the fault, then flip the toggle back up to restore the circuit. There's no spare fuse to hunt for.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the interrupt capacity?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"5,000 amps at 277V AC and 1,500 amps at 80V DC. That high interrupt rating is what lets it safely protect circuits fed by large paralleled battery banks.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it rated for marine use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It meets UL 1077 for supplementary protection and is built for the temperature and vibration you see on a boat, from -40 to 185 degrees Fahrenheit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long will it last?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Egis rates it for 6,000 operating cycles at full load and backs it with a 4 year warranty.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Egis Mobile Electric","offers":[{"title":"Default Title","offer_id":45087876481117,"sku":"2010275","price":16.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/EME320110_001.jpg?v=1790142583","url":"https:\/\/nvnmarine.com\/products\/egis-a-series-10a-panel-mount-breaker-3201-10","provider":"NVN Marine","version":"1.0","type":"link"}