{"product_id":"egis-6200-225-dual-level-marine-busbar-200a","title":"Egis 6200-225 Dual Level Marine Busbar 200A","description":"\u003cp class=\"nvn-hero\"\u003eThe Egis Mobile Electric 6200-225 is a dual level marine busbar that cleans up your DC distribution in tight spaces. It carries 200 amps at up to 80 volts DC across 5 stud terminals and 19 screw terminals, all on tin plated copper with an insulated cover. Great for wiring up a house bank, accessories, and grounds behind the panel.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you've ever tried to land eight or ten wires on a single stud, you know how fast a DC panel turns into a rat's nest. The Egis Mobile Electric 6200-225 fixes that. It's a dual level busbar, which means the terminals sit on two stacked rows instead of one, so your wires and cables can all approach from the same direction rather than crossing over each other. That one detail makes a real difference when you're working in a cramped locker or behind a switch panel where there's simply no room to route leads in from both sides.\u003c\/p\u003e\n\u003cp\u003eYou get 5 stud terminals for the heavy stuff, think battery cables, inverter feeds, and big accessory runs, plus 19 screw terminals for all the smaller circuits. The whole bar is rated for 200 amps at up to 80 volts DC, so it handles a serious house bank or a busy 12V or 24V distribution point without breaking a sweat. Use it as a common positive bus, a negative bus, or a grounding block. It doesn't care which.\u003c\/p\u003e\n\u003cp\u003eBecause the studs and screw terminals share the same bar, you can mix wire sizes freely. Land your fat battery and inverter cables on the studs, then bring your pumps, lights, electronics, and chargers into the screw terminals. It keeps a mixed-gauge system organized on one tidy block instead of scattered across three or four separate bars.\u003c\/p\u003e\n\u003cp\u003eThe bar itself is tin plated copper. Copper for the conductivity, tin plating to fight the corrosion that eats bare copper alive in salt air. On a boat, that matters more than most people think. A green, crusty connection is a high-resistance connection, and high resistance means heat and voltage drop right where you don't want them. The tin plating keeps the contact surfaces clean and conductive for the long haul.\u003c\/p\u003e\n\u003cp\u003eEgis ships it with stainless steel self locking hardware, and the self locking part is the point. Everything on a boat vibrates, and a nut that quietly backs off on a 200 amp connection is trouble you don't want to find later. The stainless resists rust, and the locking feature keeps your torque right where you set it, season after season.\u003c\/p\u003e\n\u003cp\u003eThere's an insulated protective cover included too, with break away tabs so you can pop open just the section you need for a quick inspection instead of pulling the whole thing off. Covering your bus bars isn't optional on a well-built boat. A dropped wrench or a stray strand of wire laid across an uncovered 200 amp bus makes for a very bad day. The cover keeps fingers, tools, and stray debris off the live terminals.\u003c\/p\u003e\n\u003cp\u003eThe footprint is compact at 3.86 inches long by 1.79 inches wide, so it tucks into tight electrical panels and small lockers where a bigger block just wouldn't fit. Mount it somewhere dry and accessible. You want to be able to get a wrench on those studs and read your connections without having to dismantle half the boat to do it.\u003c\/p\u003e\n\u003cp\u003eThis is a solid pick for anyone building out or cleaning up a DC system, from a center console with a growing pile of electronics to a cruiser wiring in a second battery bank. A few notes from experience. Snug the stud nuts down firmly, but don't gorilla them, over-torquing is the fastest way to strip a terminal or crack a lug. Get the screw terminals tight too, a loose small-gauge connection heats up just like a big one does. And plan your layout before you start landing wires, so the finished bus reads cleanly and troubleshoots easily years down the road.\u003c\/p\u003e\n\u003cp\u003eOne more thing worth saying. A busbar distributes power, it doesn't protect it. Every branch circuit still needs its own correctly sized fuse or breaker, and the main feed from the battery should be protected close to the source. The bar carries the current, your overcurrent protection handles the faults.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eDual level design stacks terminals on two rows so wires and cables approach from the same direction, ideal for tight panels\u003c\/li\u003e\n  \u003cli\u003e200 amp current rating at up to 80 volts DC handles a full house bank or a busy DC distribution point\u003c\/li\u003e\n  \u003cli\u003e5 stud terminals for heavy battery, inverter, and accessory cables\u003c\/li\u003e\n  \u003cli\u003e19 screw terminals for smaller branch circuits and accessory wiring\u003c\/li\u003e\n  \u003cli\u003eTin plated copper construction resists saltwater corrosion while keeping connections low-resistance\u003c\/li\u003e\n  \u003cli\u003eStainless steel self locking hardware holds torque through constant vibration\u003c\/li\u003e\n  \u003cli\u003eInsulated protective cover with break away tabs lets you inspect one section without removing the whole cover\u003c\/li\u003e\n  \u003cli\u003eCompact 3.86 in by 1.79 in footprint fits tight lockers and crowded electrical panels\u003c\/li\u003e\n  \u003cli\u003eWorks as a common positive bus, negative bus, or grounding block\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Egis Mobile Electric reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the current rating of the Egis 6200-225 busbar?\u003c\/summary\u003e\n    \u003cp\u003eIt's rated for 200 amps at up to 80 volts DC, so it works comfortably for 12V, 24V, and 48V DC systems well within that ceiling.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many connections does it have?\u003c\/summary\u003e\n    \u003cp\u003eFive stud terminals for heavy cables plus nineteen screw terminals for smaller circuits, laid out in a 2 by 5 dual level configuration.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does dual level mean?\u003c\/summary\u003e\n    \u003cp\u003eThe terminals sit on two stacked rows instead of one. That lets your wires approach from the same direction and keeps the wiring tidy in cramped spaces.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it suitable for saltwater use?\u003c\/summary\u003e\n    \u003cp\u003eYes. The bar is tin plated copper, which resists the corrosion that attacks bare copper in salt air, and the hardware is stainless steel.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it as a ground or negative bus?\u003c\/summary\u003e\n    \u003cp\u003eAbsolutely. A busbar doesn't care about polarity. Use it as a common positive, a negative bus, or a grounding block.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a cover?\u003c\/summary\u003e\n    \u003cp\u003eYes, an insulated protective cover is included. It has break away tabs so you can open just the section you need to inspect a connection.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the dimensions?\u003c\/summary\u003e\n    \u003cp\u003eThe bar measures 3.86 inches long by 1.79 inches wide, a compact footprint that fits tight electrical panels.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the hardware made of?\u003c\/summary\u003e\n    \u003cp\u003eStainless steel self locking hardware. The self locking feature keeps the nuts from backing off under the constant vibration you get on a boat.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the busbar provide circuit protection?\u003c\/summary\u003e\n    \u003cp\u003eNo. A busbar distributes power but doesn't protect it. Each branch circuit still needs its own correctly sized fuse or breaker, and the main feed should be protected near the battery.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work on a 24 volt system?\u003c\/summary\u003e\n    \u003cp\u003eYes. The 80 volt DC rating covers 12V, 24V, and 48V DC systems with plenty of margin.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eEgis Mobile Electric 6200-225 Dual Level Busbar, 5 Stud \/ 19 Screw Terminal, 80 Volt DC, 200 Amp, Insulated Cover, Tin Plated Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEgis Mobile Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e6200-225\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e850074331308\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDual Level Flat Strip\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCircuit Configuration\u003c\/th\u003e\n\u003ctd\u003e2 x 5 Circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eStud Terminals\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eScrew Terminals\u003c\/th\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage Rating\u003c\/th\u003e\n\u003ctd\u003e80 Volt DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCurrent Rating\u003c\/th\u003e\n\u003ctd\u003e200 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3.86 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e1.79 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTin Plated Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHardware\u003c\/th\u003e\n\u003ctd\u003eStainless Steel Self-Locking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCover\u003c\/th\u003e\n\u003ctd\u003eInsulated Protective Cover with Break-Away Tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the current rating of the Egis 6200-225 busbar?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's rated for 200 amps at up to 80 volts DC, so it works comfortably for 12V, 24V, and 48V DC systems well within that ceiling.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many connections does it have?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Five stud terminals for heavy cables plus nineteen screw terminals for smaller circuits, laid out in a 2 by 5 dual level configuration.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does dual level mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The terminals sit on two stacked rows instead of one. That lets your wires approach from the same direction and keeps the wiring tidy in cramped spaces.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it suitable for saltwater use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The bar is tin plated copper, which resists the corrosion that attacks bare copper in salt air, and the hardware is stainless steel.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it as a ground or negative bus?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Absolutely. A busbar doesn't care about polarity. Use it as a common positive, a negative bus, or a grounding block.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a cover?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, an insulated protective cover is included. It has break away tabs so you can open just the section you need to inspect a connection.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the dimensions?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The bar measures 3.86 inches long by 1.79 inches wide, a compact footprint that fits tight electrical panels.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the hardware made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Stainless steel self locking hardware. The self locking feature keeps the nuts from backing off under the constant vibration you get on a boat.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the busbar provide circuit protection?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. A busbar distributes power but doesn't protect it. Each branch circuit still needs its own correctly sized fuse or breaker, and the main feed should be protected near the battery.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work on a 24 volt system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The 80 volt DC rating covers 12V, 24V, and 48V DC systems with plenty of margin.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Egis Mobile Electric","offers":[{"title":"Default Title","offer_id":45076942487645,"sku":"2009764","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/EME6200225_001.jpg?v=1789897409","url":"https:\/\/nvnmarine.com\/products\/egis-6200-225-dual-level-marine-busbar-200a","provider":"NVN Marine","version":"1.0","type":"link"}