Egis 4730-05 5A Short Stop Circuit Breaker | NVN Marine
Egis 4730-05 5A Short Stop Circuit Breaker | NVN Marine — Product description
A 5 amp, tan, surface mount resettable breaker for low draw 12V and 24V DC boat circuits. Trip it, fix the problem, reset it.
If you've ever lost a bilge pump, a stereo, or a set of nav lights to a blown fuse at the worst possible moment, you already know why a resettable breaker earns its spot on the panel. The Egis Short Stop 4730-05 is a 5 amp, tan, surface mount circuit breaker built for the small circuits on a boat. It protects the wire, you push the button once the problem is sorted, and you're back in business. No spare fuses rattling around in a drawer.
Five amps is a light rating, and that's the point. This breaker belongs on low draw circuits. Think instrument power, a small accessory feed, a gauge cluster, a USB charging outlet, or a single LED light run. The 28 volt DC maximum rating covers both 12 volt and 24 volt systems, so the same part works on a center console and on a larger boat with a 24 volt bus. Egis lists it as weather resistant, which matters when the breaker lives somewhere damp like a console, a helm pod, or a tower.
The Short Stop is a compact surface mount design. That means you screw it down to a flat surface and wire it in, without cutting a big hole in a panel. It's a handy fit when you're adding a circuit to an existing boat and don't want to rework the dash. Egis color codes the Short Stop line by amp rating, and 5 amp is tan. When you're tracing a wiring harness years from now, that color tells you what the breaker is rated for at a glance.
Why choose a breaker over a fuse for a small circuit? Mostly convenience and diagnosis. A fuse is a one-shot part. When it opens, you have to find a replacement of the right value, pull the old one, and hope you don't drop it in the bilge. A manual reset breaker trips, you find the cause, and you reset it. If it trips again right away, you've got a real fault and you know it. That's useful information when you're troubleshooting at the dock or anchored out.
Sizing matters. The breaker's job is to protect the wire, not the device on the end of it. Pick a wire gauge that safely carries more than the breaker rating over the length of your run, then match the breaker to that wire. A 5 amp breaker pairs with light gauge wire and short to moderate runs. If the circuit you're protecting normally draws close to 5 amps continuously, step up to the next breaker size and make sure your wire supports it. Breakers also run a little more sensitive in a hot engine space, so leave some headroom there.
Installation is simple. Mount the breaker in an accessible, dry spot near the power source, run your positive feed to the input side, and your load wire to the output side. Keep the connections tight and use proper marine grade terminals, and heat shrink or sealant on the crimps. Label the circuit while you're at it. Future you will be grateful when something goes dark and you're hunting for the right breaker with a flashlight.
Keep in mind this is a DC breaker. It's rated for 28 volts DC maximum and isn't meant for household AC circuits. Stay inside the rating and it'll do the job it was built for. We carry the rest of the Short Stop line too, so if you're building out a panel with a mix of circuits, you can match each amp rating to its load and keep the whole run consistent.
Bottom line, this is a small, honest part that solves a small, annoying problem. A 5 amp resettable breaker for low draw circuits, tan so you can spot it, surface mounted so it's easy to add. Order a couple, label them, and put one on the next accessory you wire in.
Key Features
- 5 amp rating for low draw 12V and 24V DC circuits
- Manual reset, no spare fuses to hunt down
- Compact surface mount design, no panel cutout needed
- 28V DC maximum rating covers 12V and 24V systems
- Weather resistant construction for damp helm and console locations
- Tan color coding for quick amp identification
- Part of the Egis Short Stop line
- Good fit for gauges, instruments, small accessories and LED lighting
Why Buy from NVN Marine
- Authorized Egis Mobile Electric reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
We stock the Egis Short Stop line and can help you match breaker ratings to your wire and loads. Questions before you order? Ask the crew.
Technical specifications
| Title | Egis 5A Tan Short Stop Circuit Breaker |
|---|---|
| Brand | Egis Mobile Electric |
| Manufacturer Part Number | 4730-05 |
| UPC | 850053879869 |
| Product Line | Short Stop |
| Amperage | 5 A |
| Color | Tan |
| Mounting | Surface Mount |
| Reset Type | Resettable |
| Maximum Voltage | 28V DC |
| System Voltage | 12V and 24V DC |
| Weather Resistance | Weather Resistant |
| Category | Electrical, Circuit Breakers |
Frequently asked questions
What is the amp rating of this breaker?
It's rated at 5 amps. The tan color matches that rating in the Egis Short Stop line.
Can I use it on a 24 volt system?
Yes. It carries a 28V DC maximum rating, so it works on both 12 volt and 24 volt DC systems.
Is it a manual reset or automatic reset breaker?
It's a resettable breaker. After it trips, you find the cause of the overload and reset it, no replacement part needed.
Is it okay for AC circuits?
No. The rating is for DC, up to 28 volts. Don't use it on household style AC circuits.
How do I mount it?
It's a surface mount breaker. Screw it to a flat, accessible, dry surface near your power source and wire the input and output sides.
What kinds of circuits is a 5 amp breaker good for?
Low draw loads such as instruments, gauges, small accessories, USB outlets and single LED light runs. Check your device's draw first.
Is it weather resistant?
Egis lists it as weather resistant. For best life, still mount it out of direct spray and keep the connections sealed.
What wire size should I use?
Pick a gauge that safely carries more than the breaker rating over your run length, following ABYC guidance, then protect that wire with the breaker.
Why is it tan?
Egis color codes the Short Stop line by amp rating. Tan identifies the 5 amp version, which makes panel tracing easier.