Egis 300A Circuit Breaker, 87 Series Surface Mount (4704-300)
Egis 300A Circuit Breaker, 87 Series Surface Mount (4704-300) — Product description
The Egis 4704-300 is a 300 amp, 87 Series surface mount circuit breaker built for heavy DC feeds on boats. It's sealed against dust and water intrusion and supports 12 and 24 volt systems, so you get resettable protection right where the big cables start.
If you've got a big battery bank and a long cable run to a windlass, thruster, inverter or main bus, you already know a fuse isn't always the friendliest answer. A 300 amp breaker gives you the same overcurrent protection with a handle you can reset after the fault is fixed. This Egis 87 Series surface mount breaker (4704-300) is built for exactly that kind of heavy DC feed.
The 87 Series is a surface mount design, so it bolts onto a flat panel or bulkhead instead of needing a cutout. That makes it easy to rig up near the battery switch, on a battery box wall, or on a backer plate in the engine room. The housing is sealed against dust and water intrusion, which matters in a bilge or a lazarette where spray, condensation and grit are part of daily life. We'd still mount it as high and dry as the layout allows, but it's good to know the case isn't a sponge.
Egis lists the high voltage rating on this breaker as supporting 12 and 24 volt DC systems. That covers most boats, from a small center console with one house bank to a larger cruiser running 24 volts for the thruster. If you're running something outside those two common voltages, check with us before you order and we'll look at the details together.
Size matters here. A 300 amp breaker belongs on a circuit with cable that can carry the load, and the breaker protects the wire, not the other way around. Pick your cable gauge first based on the current and the run length, then match the breaker rating to what that cable can safely handle. Don't oversize the breaker to stop it from tripping. A breaker that keeps tripping is telling you something, and the fix is finding out why.
The footprint is compact for what it does. It measures 3 inches high, 5 inches wide and 6 inches long, so you can plan your panel layout before the box arrives. Leave room around the terminals for proper lugs and a clean cable bend. Tight, well-crimped lugs are what keep a high current connection cool. A loose one will heat up long before the breaker has any reason to trip.
Where does a breaker like this make the most sense? Right at the source. Mounting it close to the battery shortens the stretch of unprotected cable, and that's the stretch that causes the most trouble if something chafes through. Many owners put one on each major feed, so a problem with the thruster doesn't take the whole boat's power with it. It also doubles as a handy disconnect when you're working on the circuit downstream, as long as you confirm the circuit is dead with a meter.
It's a good fit for a replacement, too. If your old breaker has started tripping below its rating, shows burn marks, or won't hold when reset, swapping in a fresh one is cheap insurance compared with chasing a mystery voltage drop. Check the terminal hardware and lug condition at the same time, since a tired lug is often the real culprit.
What this breaker isn't: it isn't a switch for everyday on and off use, and it isn't a substitute for correct wire sizing or a proper battery disconnect where your boat needs one. Treat it as the protective device on a high current feed, installed by someone comfortable working with big DC cables. If you're not sure about your setup, our crew is happy to talk it through before you buy.
The Egis name has a long track record in marine and fleet vehicle electrical gear, with products aimed at safe, dependable power and battery protection. This 300A surface mount breaker carries that same job description. Pair it with the right cable and lugs, mount it on a solid surface, and it'll sit there quietly doing its job until the day you need it.
Key Features
- 300A rating handles heavy DC feeds like thrusters, windlasses and inverters.
- 87 Series surface mount design bolts to a flat panel with no cutout needed.
- Sealed against dust and water intrusion for bilge and engine room installs.
- High voltage rating supports 12 and 24 VDC applications.
- Resettable, so you're not hunting for a spare fuse after a fault.
- Compact 3 in H x 5 in W x 6 in L footprint makes layout planning easy.
Why Buy from NVN Marine
- Authorized Egis Mobile Electric reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Egis 300A Circuit Breaker - 87 Series - Surface Mount |
|---|---|
| Brand | Egis Mobile Electric |
| Manufacturer Part Number | 4704-300 |
| UPC | 850074331865 |
| Category | Electrical | Circuit Breakers |
| Product Type | DC Circuit Breaker |
| Series | 87 Series |
| Amperage Rating | 300 A |
| Mounting Style | Surface Mount |
| Voltage Support | 12 and 24 VDC applications |
| Enclosure | Sealed against dust and water intrusion |
| Height | 3 in |
| Width | 5 in |
| Length | 6 in |
Frequently asked questions
What does the Egis 4704-300 circuit breaker protect?
It's a 300 amp DC circuit breaker for high current feeds such as a main battery cable, windlass, thruster or inverter circuit. It trips on overcurrent to protect the wire and gear downstream, and you can reset it once the cause is fixed.
How is it mounted?
It's a surface mount breaker from the 87 Series. It bolts onto a flat panel, bulkhead or backer plate and doesn't need a cutout.
What voltage systems does it support?
Egis lists a high voltage rating that supports 12 and 24 volt DC applications. If your system runs something different, ask us before ordering.
Is it water resistant?
The housing is described as sealed against dust and water intrusion. We'd still mount it in the driest spot that works for your layout.
How big is it?
It measures 3 inches high by 5 inches wide by 6 inches long, so you can plan panel space ahead of time.
What wire size should I use with a 300 amp breaker?
Choose the cable first, based on current, run length and acceptable voltage drop, then make sure the breaker rating matches what that cable can safely carry. The breaker protects the wire, so never size it above the cable's capacity.
Can I use it as an on and off switch?
It can serve as a handy disconnect when you're working on a circuit, but it's designed as a protective device, not a daily switch. Always verify the circuit is dead with a meter before working on it.
Why does my breaker keep tripping?
Repeated tripping means something is wrong, like an overloaded circuit, a short, a damaged cable or a loose connection. Find the cause instead of moving up to a bigger breaker.
What is the manufacturer part number?
The Egis manufacturer part number is 4704-300 and the UPC is 850074331865.