{"product_id":"egis-2220-06-6-circuit-20a-marine-terminal-block","title":"Egis 2220-06 6-Circuit 20A Marine Terminal Block","description":"\u003cp class=\"nvn-hero\"\u003eThe Egis Mobile Electric 2220-06 is a six-circuit terminal block that takes one feed and splits it into six independent screw-terminated pairs. Tin-plated copper conductors, stainless steel hardware, and a high-temperature insulation body make it a dependable way to clean up DC distribution on a boat.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Egis Mobile Electric 2220-06 is a six-circuit terminal block built to take one incoming feed and split it cleanly into separate, screw-terminated pairs. If you've ever tried to daisy-chain a handful of accessories off a single stud and ended up with a bird's nest of ring terminals, this is the fix. Each of the six pairs gives you one input screw and one output screw, landed on their own copper alloy bus bar, so every circuit stays independent.\u003c\/p\u003e\n\u003cp\u003eWhat makes it worth putting on a boat instead of a generic hardware-store block is the material choice. The conductors are tin-plated copper alloy. That tin plating is the part that matters out on the water, because bare copper corrodes fast in salt air and damp bilge spaces, and corroded copper means voltage drop, heat, and eventually a connection that quits on you. The hardware is stainless steel, and the insulation body is a high-temperature material that won't soften or distort when a circuit runs warm. It's the kind of build that holds up season after season in a console or a battery compartment.\u003c\/p\u003e\n\u003cp\u003eElectrically, each circuit is rated for 20 amps continuous at up to 240 volts AC or DC. That range covers a lot of ground. It'll support 12, 24, 36, and 48 volt DC systems, and it handles 120 and 240 volt AC applications too, so the same block works whether you're distributing house-bank DC loads or wiring in shore-power accessories. Dielectric strength is rated at 2000 Vac, which is the block's ability to resist arcing between adjacent circuits under load.\u003c\/p\u003e\n\u003cp\u003eEgis paid attention to the details that cause headaches on real installs. There are anti-rotation ribs on the conductor strips, so if you've got a long strain-relief run and the wire wants to twist, the ring terminal stays put instead of spinning loose. The insulation walls between pairs are tall enough to keep a ring terminal splice from shorting across to the neighbor circuit or to ground, which is the failure you don't want to chase down offshore.\u003c\/p\u003e\n\u003cp\u003eWhere does it earn its keep? Think of any spot where you've got several 12-volt loads that all need a common feed. Nav lights, a bilge pump, a livewell pump, a stereo, a chartplotter accessory circuit. Run your positive feed to the input side, ground to the negative side, and land each accessory on its own pair. Now every circuit is labeled, isolated, and easy to service. When you need to troubleshoot one device, you're pulling one screw, not unwinding the whole harness. It's the difference between a five-minute fix and an afternoon lost chasing a fault with a multimeter, and it's the difference the next owner notices too when they open the panel and find every run traced to its own labeled pair.\u003c\/p\u003e\n\u003cp\u003eA quick note on wiring it up right. Match your wire gauge to the load, not just to what fits the screw, and use adhesive-lined heat-shrink ring terminals for the cleanest, most water-resistant connection. Keep like circuits grouped so the panel makes sense to the next person who opens it up, even if that person is you a few seasons from now.\u003c\/p\u003e\n\u003cp\u003eThe block itself is compact at 2.92 inches long by 0.86 inches wide, so it tucks into tight console spaces and small electrical panels without hogging real estate. You'll want to size your ring terminals to the screws and torque them down properly, and it's smart to keep the whole assembly out of standing water even though the materials are corrosion-resistant. Egis backs it with a four-year warranty, which tells you what they think of it. For anybody cleaning up a messy DC distribution setup or building a new panel from scratch, this is a straightforward, dependable piece to build around.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSix matching screw-terminal connection pairs, one input and one output each, landed on separate copper alloy bus bars for full circuit isolation\u003c\/li\u003e\n  \u003cli\u003eRated 20 amps continuous per circuit at up to 240 volts AC or DC\u003c\/li\u003e\n  \u003cli\u003eSupports 12, 24, 36, and 48 volt DC systems plus 120 and 240 volt AC applications\u003c\/li\u003e\n  \u003cli\u003eTin-plated copper alloy conductors resist corrosion in salt air and damp bilge spaces\u003c\/li\u003e\n  \u003cli\u003eStainless steel hardware and high-temperature insulation for harsh, wet marine environments\u003c\/li\u003e\n  \u003cli\u003e2000 Vac dielectric strength with tall insulation walls to prevent shorting to adjacent circuits or ground\u003c\/li\u003e\n  \u003cli\u003eAnti-rotation ribs on the conductor strips keep ring terminals from spinning loose on long strain-relief runs\u003c\/li\u003e\n  \u003cli\u003eCompact 2.92 in by 0.86 in footprint fits tight console and panel spaces\u003c\/li\u003e\n  \u003cli\u003eBacked by a 4-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Egis Mobile Electric reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many circuits does the Egis 2220-06 terminal block have?\u003c\/summary\u003e\n    \u003cp\u003eIt has six matching connection pairs. Each pair gives you one input screw and one output screw on its own copper alloy bus bar, so all six circuits stay fully independent.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the current and voltage ratings?\u003c\/summary\u003e\n    \u003cp\u003eEach circuit is rated for 20 amps continuous at up to 240 volts AC or DC. Dielectric strength is rated at 2000 Vac.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use this on a 12-volt boat?\u003c\/summary\u003e\n    \u003cp\u003eYes. It supports 12, 24, 36, and 48 volt DC systems, and it also handles 120 and 240 volt AC applications, so it fits most boat wiring setups.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it use screw terminals or push-in connectors?\u003c\/summary\u003e\n    \u003cp\u003eScrew terminals. Each connection is a screw that clamps a ring terminal, giving you a solid, serviceable connection you can torque down properly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre the conductors corrosion-resistant?\u003c\/summary\u003e\n    \u003cp\u003eYes. The conductors are tin-plated copper alloy and the hardware is stainless steel. The tin plating is what protects against the corrosion bare copper suffers in salt air and damp spaces.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat keeps the ring terminals from rotating?\u003c\/summary\u003e\n    \u003cp\u003eAnti-rotation ribs on the conductor strips. If a wire wants to twist under a long strain-relief run, the ring terminal stays seated instead of spinning loose.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill circuits short to each other on this block?\u003c\/summary\u003e\n    \u003cp\u003eThe design guards against it. Tall insulation walls between pairs keep a ring terminal splice from shorting across to the neighbor circuit or to ground, and the block carries a 2000 Vac dielectric rating.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow big is the block?\u003c\/summary\u003e\n    \u003cp\u003eIt measures 2.92 inches long by 0.86 inches wide, so it tucks into tight console spaces and small electrical panels.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs there a warranty?\u003c\/summary\u003e\n    \u003cp\u003eYes. Egis Mobile Electric backs the 2220-06 with a four-year warranty.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eEgis Mobile Electric 2220-06 6-Circuit 20A Terminal Block\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEgis Mobile Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e2220-06\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e850074331377\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCircuits\u003c\/th\u003e\n\u003ctd\u003e6 connection pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eContinuous Current\u003c\/th\u003e\n\u003ctd\u003e20 A per circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Voltage\u003c\/th\u003e\n\u003ctd\u003e240 Volt AC\/DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSystems Supported\u003c\/th\u003e\n\u003ctd\u003e12, 24, 36, 48 VDC and 120\/240 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDielectric Strength\u003c\/th\u003e\n\u003ctd\u003e2000 Vac\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConductor Material\u003c\/th\u003e\n\u003ctd\u003eTin Plated Copper Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHardware Material\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminal Type\u003c\/th\u003e\n\u003ctd\u003eScrew Terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlock Dimensions (L x W)\u003c\/th\u003e\n\u003ctd\u003e2.92 in x 0.86 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e4 Year\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many circuits does the Egis 2220-06 terminal block have?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It has six matching connection pairs. Each pair gives you one input screw and one output screw on its own copper alloy bus bar, so all six circuits stay fully independent.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the current and voltage ratings?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Each circuit is rated for 20 amps continuous at up to 240 volts AC or DC. Dielectric strength is rated at 2000 Vac.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use this on a 12-volt boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It supports 12, 24, 36, and 48 volt DC systems, and it also handles 120 and 240 volt AC applications, so it fits most boat wiring setups.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it use screw terminals or push-in connectors?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Screw terminals. Each connection is a screw that clamps a ring terminal, giving you a solid, serviceable connection you can torque down properly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are the conductors corrosion-resistant?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The conductors are tin-plated copper alloy and the hardware is stainless steel. The tin plating is what protects against the corrosion bare copper suffers in salt air and damp spaces.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What keeps the ring terminals from rotating?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Anti-rotation ribs on the conductor strips. If a wire wants to twist under a long strain-relief run, the ring terminal stays seated instead of spinning loose.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will circuits short to each other on this block?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The design guards against it. Tall insulation walls between pairs keep a ring terminal splice from shorting across to the neighbor circuit or to ground, and the block carries a 2000 Vac dielectric rating.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How big is the block?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It measures 2.92 inches long by 0.86 inches wide, so it tucks into tight console spaces and small electrical panels.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is there a warranty?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Egis Mobile Electric backs the 2220-06 with a four-year warranty.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Egis Mobile Electric","offers":[{"title":"Default Title","offer_id":45097854533725,"sku":"2011047","price":8.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/EME222006_001.jpg?v=1790349723","url":"https:\/\/nvnmarine.com\/products\/egis-2220-06-6-circuit-20a-marine-terminal-block","provider":"NVN Marine","version":"1.0","type":"link"}