{"product_id":"egis-2220-02-2-circuit-20a-terminal-block","title":"Egis 2220-02 2-Circuit 20A Terminal Block","description":"\u003cp class=\"nvn-hero\"\u003eThe Egis Mobile Electric 2220-02 is a compact two-circuit marine terminal block rated for 20 amps and 240 volts AC or DC. Tin-plated copper bus bars, stainless hardware, and screw terminals give you a clean, serviceable junction for two circuits in a footprint that tucks into tight rigging spaces.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Egis Mobile Electric 2220-02 is a two-circuit terminal block built for the kind of wiring work that has to hold up on a boat. It gives you two matched screw-terminal pairs, each with one input screw and one output screw landing on its own tin-plated copper alloy bus bar. Small footprint, honest construction, and a rating that covers most low-voltage DC accessory runs and plenty of AC work too.\u003c\/p\u003e\n\u003cp\u003eIf you've ever chased down a corroded connection behind a console, you already know why the materials matter here. The conductors are tin-plated copper alloy, the hardware is stainless steel, and the body is a high-temperature insulation material. Tinning is what keeps copper from going green and chalky in a damp bilge or a splash-prone helm, so the connection you make today still reads clean a few seasons down the line. That's the whole point of marine-grade parts, and it's why we stock this line for rigging jobs that live near saltwater.\u003c\/p\u003e\n\u003cp\u003eElectrically, the 2220-02 carries 20 amps of continuous current and tops out at 240 volts AC or DC. It's rated 125 volts per circuit, which means it comfortably supports 12, 24, 36, and 48 Vdc systems, along with 120 and 240 Vac applications. Dielectric strength is 2000 Vac. For most of us that translates to a dependable spot to land pumps, lighting circuits, electronics power, or a small accessory bus without worrying about the block being the weak link.\u003c\/p\u003e\n\u003cp\u003eTwo design details earn their keep during install. Anti-rotation ribs on the conductor strips keep the terminal from spinning when your strain-relief run is long and the wire wants to twist as you torque it down. And the high insulation walls between pairs keep ring-terminal splices from shorting across to the neighbor circuit or to ground. Little things, but they're the difference between a clean job and a callback.\u003c\/p\u003e\n\u003cp\u003eWiring it is straightforward. Each circuit is a pair: one screw for the feed coming in, one screw for the load going out, each landing on a separate copper alloy bus bar. Strip, crimp a ring terminal, set it under the screw, and torque. Because every pair is independent, you can run two separate circuits through one compact block instead of splicing them loose behind the dash.\u003c\/p\u003e\n\u003cp\u003eOne more thing worth saying about screw-terminal blocks in general. They're easy to service. When you're chasing a fault a year from now, you can back out a single screw, check the connection, and re-land it without cutting and re-crimping the whole run. Loose heat-shrink splices don't give you that. On a boat, where vibration and moisture are always working against your wiring, a block you can open up and inspect is worth the few extra minutes it takes to install one. Keep the screws snug, give them a look at the start of each season, and this block will outlast most of the gear hanging off it.\u003c\/p\u003e\n\u003cp\u003eWhere does it fit best? Think smaller accessory jobs. A bilge pump and a livewell pump. A pair of lighting circuits. Nav electronics feed and a secondary switch leg. Anywhere you need a tidy, serviceable junction for two circuits and you don't want to give up a lot of panel real estate. At 1.43 inches long and 0.86 inches wide, it tucks into tight rigging spaces where a larger block won't go. If you need more circuits, the same family runs up through 4, 6, 8, 10, and 12 matching pairs, so you can keep the look and the hardware consistent across a whole rewire.\u003c\/p\u003e\n\u003cp\u003eIt's backed by a 4-year warranty, which tells you how Egis feels about the construction. For a part this size and price, it's a sensible upgrade over a loose butt-splice or a hardware-store block that isn't built for the marine environment. Buy it once, wire it clean, and forget about it.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e2 matched screw-terminal pairs, one input and one output screw per circuit\u003c\/li\u003e\n  \u003cli\u003e20 amp continuous current rating handles pumps, lighting, and electronics feeds\u003c\/li\u003e\n  \u003cli\u003e240 volt AC\/DC maximum, rated 125V per circuit for 12, 24, 36, and 48 Vdc and 120\/240 Vac systems\u003c\/li\u003e\n  \u003cli\u003eTin-plated copper alloy bus bars resist corrosion in damp marine spaces\u003c\/li\u003e\n  \u003cli\u003eStainless steel hardware for long-term reliability near saltwater\u003c\/li\u003e\n  \u003cli\u003eAnti-rotation ribs keep terminals from spinning on long strain-relief runs\u003c\/li\u003e\n  \u003cli\u003eHigh insulation walls between pairs prevent ring-terminal splices from shorting across circuits\u003c\/li\u003e\n  \u003cli\u003eDielectric strength of 2000 Vac\u003c\/li\u003e\n  \u003cli\u003eCompact 1.43 in x 0.86 in footprint fits tight rigging spaces\u003c\/li\u003e\n  \u003cli\u003eBacked by a 4-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Egis Mobile Electric reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many circuits does the 2220-02 have?\u003c\/summary\u003e\n    \u003cp\u003eTwo. The block provides two matched screw-terminal pairs, each with one input screw and one output screw landing on its own copper alloy bus bar, so you can run two independent circuits through one block.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the current rating?\u003c\/summary\u003e\n    \u003cp\u003e20 amps of continuous current per the Egis specification.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use it on 12V, 24V, 36V, or 48V DC systems?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's rated 125 volts per circuit, which comfortably supports 12, 24, 36, and 48 Vdc systems, as well as 120 and 240 Vac applications, up to a 240 volt maximum.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it handle AC as well as DC?\u003c\/summary\u003e\n    \u003cp\u003eYes. The 2220-02 is rated for both AC and DC up to 240 volts, with a dielectric strength of 2000 Vac.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the conductors and hardware made of?\u003c\/summary\u003e\n    \u003cp\u003eThe conductors are tin-plated copper alloy and the hardware is stainless steel, both chosen to hold up in harsh, damp marine environments.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy does the tin plating matter on a boat?\u003c\/summary\u003e\n    \u003cp\u003eTinning keeps the copper from corroding, going green, and losing conductivity in humid or salt-air conditions, so the connection stays clean and low-resistance over time.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do wires connect to the block?\u003c\/summary\u003e\n    \u003cp\u003eEach circuit is a screw-terminal pair. You crimp a ring terminal onto the wire, set it under the screw on the matching bus bar, and torque it down. One screw is the input, the other is the output.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the dimensions?\u003c\/summary\u003e\n    \u003cp\u003eThe block measures 1.43 inches long by 0.86 inches wide, the most compact member of the 2220 20-amp line.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs there a warranty?\u003c\/summary\u003e\n    \u003cp\u003eYes. Egis backs the 2220-02 with a 4-year warranty.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eEgis Mobile Electric 2220-02 2-Circuit 20A Terminal Block\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEgis Mobile Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e2220-02\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e850074331353\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCircuits\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eContinuous Current\u003c\/th\u003e\n\u003ctd\u003e20 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Voltage\u003c\/th\u003e\n\u003ctd\u003e240 Volts AC\/DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDielectric Strength\u003c\/th\u003e\n\u003ctd\u003e2000 Vac\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConductor Material\u003c\/th\u003e\n\u003ctd\u003eTin Plated Copper Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHardware Material\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminal Type\u003c\/th\u003e\n\u003ctd\u003eScrew Terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDimensions (L x W)\u003c\/th\u003e\n\u003ctd\u003e1.43 in x 0.86 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.05 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e4 Year\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eElectrical\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many circuits does the 2220-02 have?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Two. The block provides two matched screw-terminal pairs, each with one input screw and one output screw landing on its own copper alloy bus bar, so you can run two independent circuits through one block.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the current rating?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"20 amps of continuous current per the Egis specification.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use it on 12V, 24V, 36V, or 48V DC systems?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's rated 125 volts per circuit, which comfortably supports 12, 24, 36, and 48 Vdc systems, as well as 120 and 240 Vac applications, up to a 240 volt maximum.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it handle AC as well as DC?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The 2220-02 is rated for both AC and DC up to 240 volts, with a dielectric strength of 2000 Vac.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the conductors and hardware made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The conductors are tin-plated copper alloy and the hardware is stainless steel, both chosen to hold up in harsh, damp marine environments.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why does the tin plating matter on a boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Tinning keeps the copper from corroding, going green, and losing conductivity in humid or salt-air conditions, so the connection stays clean and low-resistance over time.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do wires connect to the block?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Each circuit is a screw-terminal pair. You crimp a ring terminal onto the wire, set it under the screw on the matching bus bar, and torque it down. One screw is the input, the other is the output.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the dimensions?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The block measures 1.43 inches long by 0.86 inches wide, the most compact member of the 2220 20-amp line.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is there a warranty?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Egis backs the 2220-02 with a 4-year warranty.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Egis Mobile Electric","offers":[{"title":"Default Title","offer_id":67600158359645,"sku":"2011270","price":6.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/EME222002_001.jpg?v=1790984580","url":"https:\/\/nvnmarine.com\/products\/egis-2220-02-2-circuit-20a-terminal-block","provider":"NVN Marine","version":"1.0","type":"link"}