{"product_id":"dometic-k1301-10-fan-tastic-vent-screw-kit","title":"Dometic K1301-10 Fan-Tastic Vent Screw Kit","description":"\u003cp class=\"nvn-hero\"\u003eThe Dometic K1301-10 is the complete screw set for mounting a Fan-Tastic Vent to your RV roof. You get all 18 flange screws plus the 4 garnish screws for the interior trim ring, matched to the vent's own thread and length. It's the right hardware for a reseal, a vent swap, or a fresh install, so nothing works loose down the road.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you're pulling an old Dometic Fan-Tastic Vent off the roof, or setting a fresh one down into the opening, you need the right hardware to put it back solid. This is that hardware. The K1301-10 kit gives you all 22 screws Dometic calls for on the job: 18 to mount the vent and 4 garnish screws for the interior trim ring. No guessing at the hardware store, no mismatched threads backing out six months down the road.\u003c\/p\u003e\n\u003cp\u003eThe 18 mounting screws are what hold the vent's flange down to your roof. A Fan-Tastic Vent drops into the standard 14 inch by 14 inch cutout, and those screws run through the flange perimeter into the roof deck. Get them all in, snug them down even, and the vent won't rock or lift when you're rolling down the interstate at 65. Lose a few over the years to rust or a rough removal and you've got a vent that leaks or buzzes. This kit puts a full set back in your hand.\u003c\/p\u003e\n\u003cp\u003eThe 4 garnish screws do a different job. Inside the coach, the garnish is the trim ring that frames the opening and hides the raw ceiling cutout. Those 4 screws thread up into the fan base from inside the RV and pull the garnish tight to the ceiling. It's a clean, finished look, and it's what keeps the interior trim from sagging or rattling loose over a season of travel. Four is exactly what one vent needs.\u003c\/p\u003e\n\u003cp\u003eKeep the two screw types sorted. The mounting screws and the garnish screws aren't interchangeable, and swapping them makes for a loose vent or a stripped garnish. The kit keeps the count right for you: 18 for the roof, 4 for the trim.\u003c\/p\u003e\n\u003cp\u003eSo who's reaching for this kit? Anybody resealing a roof and lifting the vent to get underneath it. Anybody replacing a cracked garnish or a tired old vent with a new one. Anybody who bought a used rig and found the previous owner's mystery screws stripped or missing. And anybody doing a fresh install who'd rather start with the manufacturer's own hardware than a fistful of deck screws. Matching screw length and thread matters more than folks think. Too long and you punch through something you didn't mean to. Too short and the vent works loose. The right kit takes that worry off the table.\u003c\/p\u003e\n\u003cp\u003eA word on the install itself. When you set the vent back down, you're relying on a bed of sealant under the flange plus these screws to keep water out. Screws alone don't waterproof anything. Lay your butyl tape or putty under the flange, run the 18 screws down snug and even, then top the heads and the flange edge with a self-leveling lap sealant rated for RV roofs. Do the garnish last, from inside, once the roof side is buttoned up. That order keeps everything square and gives you a dry, quiet vent.\u003c\/p\u003e\n\u003cp\u003eThe Fan-Tastic Vent has been a go-to powered roof vent in RVs and campers for decades, and Dometic keeps the replacement hardware flowing so an older vent stays serviceable instead of landing in the scrap pile. Keeping a kit like this on the shelf is cheap insurance. When you're up on the roof with the old vent already loose, the last thing you want is to find out you're four screws short.\u003c\/p\u003e\n\u003cp\u003eIt's a small part. But it's the small part that keeps a good vent sealed and solid for another decade. For what a full set of matched screws costs, there's no reason to trust a leak-prone roof to whatever's left in the coffee can. Grab the K1301-10 when you're due for a reseal or a swap, and you'll have exactly what the job calls for.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eComplete 22-piece set: 18 mounting screws plus 4 garnish screws, everything one Fan-Tastic Vent install calls for\u003c\/li\u003e\n  \u003cli\u003e18 roof mounting screws fasten the vent flange to the roof deck so it won't rock or lift at highway speed\u003c\/li\u003e\n  \u003cli\u003e4 garnish screws pull the interior trim ring tight to the ceiling from inside the coach for a finished, rattle-free look\u003c\/li\u003e\n  \u003cli\u003eGenuine Dometic hardware, part number K1301-10, matched to Fan-Tastic Vent thread and length so there's no hardware-store guesswork\u003c\/li\u003e\n  \u003cli\u003eRight for roof reseals, vent replacements, and fresh installs where you want the manufacturer's own screws\u003c\/li\u003e\n  \u003cli\u003eCorrect screw length protects the roof deck: no punch-through, no working loose over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Dometic reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's included in the Dometic K1301-10 kit?\u003c\/summary\u003e\n    \u003cp\u003eTwenty-two screws total: 18 mounting screws that fasten the vent flange to your roof deck, plus 4 garnish screws for the interior trim ring. It's the full set one Fan-Tastic Vent install calls for.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich vents does this fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's the installation screw kit for the Dometic Fan-Tastic Vent. It matches the vent's own screw thread and length so everything seats the way Dometic intended.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the garnish screws for?\u003c\/summary\u003e\n    \u003cp\u003eThe garnish is the interior trim ring that frames the vent opening and hides the ceiling cutout. The 4 garnish screws thread up into the fan base from inside the RV and pull that trim ring tight to the ceiling.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need this kit if I'm only replacing the vent dome or lid?\u003c\/summary\u003e\n    \u003cp\u003eProbably not. This kit is the mounting and garnish hardware for setting the vent into the roof and finishing the interior trim. A dome or lid swap uses its own hardware.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use this for a brand-new install, or only a replacement?\u003c\/summary\u003e\n    \u003cp\u003eBoth. Whether you're setting a fresh vent into a new cutout or remounting one after a roof reseal, the 18 mounting screws and 4 garnish screws are what the job needs.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the kit come with sealant?\u003c\/summary\u003e\n    \u003cp\u003eNo, it's screws only. Screws don't waterproof a roof on their own. Bed the flange in butyl tape or putty and top the flange and screw heads with a self-leveling lap sealant rated for RV roofs.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre the mounting screws and garnish screws the same?\u003c\/summary\u003e\n    \u003cp\u003eNo, they're two different screws for two different jobs. The 18 mounting screws go through the roof flange and the 4 garnish screws hold the interior trim. Keep them sorted so you don't mix them up.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the difference between part number K1301-10 and K130110?\u003c\/summary\u003e\n    \u003cp\u003eThey're the same part. K1301-10 is the manufacturer part number and K130110 is the same number without the dash, used as an internal reference. You're getting the correct Dometic hardware either way.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many vents will one kit cover?\u003c\/summary\u003e\n    \u003cp\u003eOne. A single Fan-Tastic Vent uses all 18 mounting screws and all 4 garnish screws, so plan on one kit per vent you're installing or resealing.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eDometic K1301-10 Fan-Tastic Vent Installation Screw Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eDometic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eK1301-10\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e834834114288\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTotal Screws\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Screws\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGarnish Screws\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eDometic Fan-Tastic Vent\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003e18 mounting screws and 4 garnish screws\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eRV roof vent installation and garnish trim\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eRV Vent Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAlternate Part Number\u003c\/th\u003e\n\u003ctd\u003eK130110\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's included in the Dometic K1301-10 kit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Twenty-two screws total: 18 mounting screws that fasten the vent flange to your roof deck, plus 4 garnish screws for the interior trim ring. It's the full set one Fan-Tastic Vent install calls for.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which vents does this fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the installation screw kit for the Dometic Fan-Tastic Vent. It matches the vent's own screw thread and length so everything seats the way Dometic intended.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the garnish screws for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The garnish is the interior trim ring that frames the vent opening and hides the ceiling cutout. The 4 garnish screws thread up into the fan base from inside the RV and pull that trim ring tight to the ceiling.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need this kit if I'm only replacing the vent dome or lid?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Probably not. This kit is the mounting and garnish hardware for setting the vent into the roof and finishing the interior trim. A dome or lid swap uses its own hardware.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use this for a brand-new install, or only a replacement?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Both. Whether you're setting a fresh vent into a new cutout or remounting one after a roof reseal, the 18 mounting screws and 4 garnish screws are what the job needs.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the kit come with sealant?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, it's screws only. Screws don't waterproof a roof on their own. Bed the flange in butyl tape or putty and top the flange and screw heads with a self-leveling lap sealant rated for RV roofs.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are the mounting screws and garnish screws the same?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, they're two different screws for two different jobs. The 18 mounting screws go through the roof flange and the 4 garnish screws hold the interior trim. Keep them sorted so you don't mix them up.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the difference between part number K1301-10 and K130110?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"They're the same part. K1301-10 is the manufacturer part number and K130110 is the same number without the dash, used as an internal reference. You're getting the correct Dometic hardware either way.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many vents will one kit cover?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"One. A single Fan-Tastic Vent uses all 18 mounting screws and all 4 garnish screws, so plan on one kit per vent you're installing or resealing.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Dometic","offers":[{"title":"Default Title","offer_id":45081252200541,"sku":"2010154","price":19.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_b9a32a3b-d0cc-4f5a-bc77-f12e3f1c936c.png?v=1790008937","url":"https:\/\/nvnmarine.com\/products\/dometic-k1301-10-fan-tastic-vent-screw-kit","provider":"NVN Marine","version":"1.0","type":"link"}