{"product_id":"dometic-94951-rv-water-heater-access-door-kit-black","title":"Dometic 94951 RV Water Heater Access Door Kit, Black","description":"\u003cp class=\"nvn-hero\"\u003eThe access door on your RV water heater lives out in the weather, and eventually it cracks, fades, or the latch quits. This is Dometic's black #44 replacement service door kit for the Atwood-built WH-6GA, WH-6GEA, and WH-9GEA heaters. You get the corner-latch door and two adapter plates so it fits the older center-latch cutout. Latches order separately.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe access door on your RV water heater takes a beating out on the road. Sun, grime, road spray, and the occasional careless bump at a campsite all add up. This is Dometic's replacement service door kit, part number 94951, built specifically for the Atwood-built WH-6GA, WH-6GEA, and WH-9GEA water heaters. It's the black #44 finish, and it's made for one job: swapping out a tired, cracked, or faded rectangular access door and bringing your rig back to weather-tight.\u003c\/p\u003e\n\u003cp\u003eHere's the exact situation this kit is made for. A lot of older rigs came with a rectangular access door that latched in the center. Over the years that center-latch design was updated to a corner-latch style. So if your original door is cracked, sun-faded, or the latch has finally given up, this kit brings you current. You get the rectangular door with the corner-latch inserts already fitted, plus two adapter plates so the newer door lines up cleanly with the older cutout in your sidewall.\u003c\/p\u003e\n\u003cp\u003eThere's a practical reason the corner-latch style became the standard, too. Latching at the corners pulls the door tight against the frame at two points instead of one, so it seats more evenly and rattles less going down the highway. If your center-latch door always flexed or popped at speed, the corner-latch version is a genuine improvement, not just a parts-availability swap.\u003c\/p\u003e\n\u003cp\u003eThose adapter plates are what make this a straightforward upgrade instead of a fabrication project. The old center-latch opening and the newer corner-latch door don't share the same frame, and the two plates bridge that gap. That means you're not cutting a new hole or filling an old one. Test-fit everything before you commit to screws. Some older cutouts have settled or been patched over the years, and a quick dry fit tells you right away whether anything needs a nudge.\u003c\/p\u003e\n\u003cp\u003eOne thing to be clear about, because it matters. This kit comes without the latches themselves. You get the door with the corner-latch inserts and the two adapter plates, but the actual latch hardware is ordered separately. Check what your heater currently uses and grab the matching corner latches at the same time, so you're not left with a door you can't close.\u003c\/p\u003e\n\u003cp\u003eThe access door isn't just cosmetic either. It's how you get to the working end of the heater. Behind it sits the burner assembly, the gas valve, and the drain plug you pull every fall to winterize. So a door that opens cleanly and latches shut tight is part of keeping the whole system serviceable. A warped or stuck door turns a five-minute winterizing job into a real fight.\u003c\/p\u003e\n\u003cp\u003eInstall is a job most owners can handle with a screwdriver and a little patience. The one thing worth doing right is the seal. These heaters live on the exterior wall, and a door that doesn't sit flush is an open invitation for rain and road spray to work their way in behind the panel. Get the screw holes aligned, seat the door evenly against the adapter plates, and don't overdrive the screws into the sidewall. If the original opening shows any soft spots or water staining, sort that out before the new door goes on.\u003c\/p\u003e\n\u003cp\u003eThis is a fitment-specific part, so confirm your model first. It's for the WH-6GA, WH-6GEA, and WH-9GEA heaters, the 6 gallon and 9 gallon gas and gas-electric units you'll find in a huge number of travel trailers and motorhomes. If you're not sure which one you have, the model number is usually printed on a label inside the existing access door or on the burner housing. Match it up, order the latches alongside this kit, set aside about twenty minutes, and you'll have a clean, weather-tight access door again.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eFits Dometic and Atwood WH-6GA, WH-6GEA, and WH-9GEA water heaters, the common 6 and 9 gallon RV units\u003c\/li\u003e\n  \u003cli\u003eBlack #44 finish matches the factory door color so the swap blends in instead of standing out\u003c\/li\u003e\n  \u003cli\u003eIncludes 2 adapter plates that fit the newer corner-latch door to the older center-latch cutout without cutting\u003c\/li\u003e\n  \u003cli\u003eCorner-latch insert design updates a tired center-latch door to the current style and seats tighter against the frame\u003c\/li\u003e\n  \u003cli\u003eRectangular door format matches the original access opening on these heaters\u003c\/li\u003e\n  \u003cli\u003eLatch hardware ordered separately so you can match exactly what your heater already uses\u003c\/li\u003e\n  \u003cli\u003eScrewdriver install most owners can handle in about twenty minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Dometic reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich water heaters does this door kit fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's made for the Atwood-built and Dometic WH-6GA, WH-6GEA, and WH-9GEA water heaters, the 6 gallon and 9 gallon gas and gas-electric units. Confirm your model number, usually on a label inside the existing access door or on the burner housing, before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes this kit include the latches?\u003c\/summary\u003e\n    \u003cp\u003eNo. You get the rectangular door with the corner-latch inserts already fitted, plus two adapter plates. The actual latch hardware is ordered separately, so grab the matching corner latches at the same time.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy are there two adapter plates in the kit?\u003c\/summary\u003e\n    \u003cp\u003eThe older center-latch opening and the newer corner-latch door don't share the same frame. The two plates bridge that gap so the new door lines up with your existing cutout. That means no cutting a new hole or filling an old one.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is the door?\u003c\/summary\u003e\n    \u003cp\u003eIt's the black #44 finish, which matches the common factory door color on these heaters, so the replacement blends in rather than announcing itself.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I install this myself?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's a screwdriver job most owners handle in about twenty minutes. Test-fit the door and adapter plates first, align the screw holes, seat the door flush, and don't overdrive the screws into the sidewall.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eMy old door latches in the center. Is this the right replacement?\u003c\/summary\u003e\n    \u003cp\u003eYes, that's exactly the swap this kit is built for. It replaces the old-style rectangular access door with a center latch and updates you to the corner-latch style.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this an Atwood part or a Dometic part?\u003c\/summary\u003e\n    \u003cp\u003eBoth. The Atwood water heater line is now part of Dometic, so this kit fits units badged either way. Match it to your WH-6GA, WH-6GEA, or WH-9GEA model and you're set.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat comes in the box?\u003c\/summary\u003e\n    \u003cp\u003eThe rectangular access door with the corner-latch inserts and two adapter plates. The latches themselves are not included and are ordered separately.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy switch from a center latch to a corner latch?\u003c\/summary\u003e\n    \u003cp\u003eLatching at the corners pulls the door tight against the frame at two points instead of one, so it seats more evenly and rattles less on the highway. If your center-latch door flexed or popped at speed, the corner-latch version is a real improvement.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eDometic 94951 RV Water Heater Access Door Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eDometic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e94951\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e7315091517379\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack (#44)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Water Heaters\u003c\/th\u003e\n\u003ctd\u003eDometic \/ Atwood WH-6GA, WH-6GEA, WH-9GEA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDoor Style\u003c\/th\u003e\n\u003ctd\u003eRectangular access door\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLatch Configuration\u003c\/th\u003e\n\u003ctd\u003eCorner-latch inserts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLatches Included\u003c\/th\u003e\n\u003ctd\u003eNo, ordered separately\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAdapter Plates Included\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReplaces\u003c\/th\u003e\n\u003ctd\u003eOld-style rectangular access door with center latch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eRV water heater service access door\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which water heaters does this door kit fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's made for the Atwood-built and Dometic WH-6GA, WH-6GEA, and WH-9GEA water heaters, the 6 gallon and 9 gallon gas and gas-electric units. Confirm your model number, usually on a label inside the existing access door or on the burner housing, before ordering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does this kit include the latches?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. You get the rectangular door with the corner-latch inserts already fitted, plus two adapter plates. The actual latch hardware is ordered separately, so grab the matching corner latches at the same time.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why are there two adapter plates in the kit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The older center-latch opening and the newer corner-latch door don't share the same frame. The two plates bridge that gap so the new door lines up with your existing cutout. That means no cutting a new hole or filling an old one.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is the door?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the black #44 finish, which matches the common factory door color on these heaters, so the replacement blends in rather than announcing itself.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I install this myself?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's a screwdriver job most owners handle in about twenty minutes. Test-fit the door and adapter plates first, align the screw holes, seat the door flush, and don't overdrive the screws into the sidewall.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"My old door latches in the center. Is this the right replacement?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, that's exactly the swap this kit is built for. It replaces the old-style rectangular access door with a center latch and updates you to the corner-latch style.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this an Atwood part or a Dometic part?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Both. The Atwood water heater line is now part of Dometic, so this kit fits units badged either way. Match it to your WH-6GA, WH-6GEA, or WH-9GEA model and you're set.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What comes in the box?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The rectangular access door with the corner-latch inserts and two adapter plates. The latches themselves are not included and are ordered separately.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why switch from a center latch to a corner latch?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Latching at the corners pulls the door tight against the frame at two points instead of one, so it seats more evenly and rattles less on the highway. If your center-latch door flexed or popped at speed, the corner-latch version is a real improvement.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Dometic","offers":[{"title":"Default Title","offer_id":45067143970909,"sku":"2008939","price":56.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_31c62f2b-4011-495c-8990-2f7c349570f7.jpg?v=1789659437","url":"https:\/\/nvnmarine.com\/products\/dometic-94951-rv-water-heater-access-door-kit-black","provider":"NVN Marine","version":"1.0","type":"link"}