Dometic 50-Foot Slide Topper Replacement Fabric Roll, Black
Dometic 50-Foot Slide Topper Replacement Fabric Roll, Black — Product description
Dometic's cut-to-fit slide topper fabric comes as a 50-foot black roll, 47.5 inches wide, so you can re-cover a faded or torn RV slide-out topper without replacing the whole assembly. It ships in a dispenser box that keeps the material flat and crease-free until you measure and cut.
If your RV's slide-out topper has faded to a chalky gray, split along a seam, or started flapping loose in the wind, this is the fabric that puts it right. It's Dometic's cut-to-fit replacement material for slide topper awnings, sold as a full 50-foot roll so you can re-cover one long slide or several shorter ones from a single order. You measure, you cut, and you feed the new fabric onto your existing roller. The arms, the spring roller, and the mounting brackets on your rig stay exactly where they are.
The roll runs 47.5 inches wide, which is the standard fabric width for the vast majority of RV slide-out toppers on fifth wheels, travel trailers, and motorhomes. Slide toppers don't need to match the full depth of the slide the way a patio awning does. They sit above the slide box and unroll a few inches past it to shed water, leaves, and debris while the slide is extended. That 47.5-inch width gives you the coverage those toppers are built around, with room to trim cleanly to your slide's length.
Buying it as a 50-foot roll is what makes this a practical fix. Instead of hunting for a pre-cut length that matches your exact slide, you get bulk material and cut only what you need. A typical 10 to 12 foot slide leaves you plenty of fabric left over for a second repair down the road, and a shop servicing several rigs can work through the roll one job at a time. The black color is the workhorse choice. It hides road grime, holds up in the sun, and looks clean against almost any coach paint scheme.
The fabric ships in a dispenser box, and that box earns its keep. On a 50-foot roll, creases and kinks are the enemy, since a permanent fold line becomes a weak spot once the topper is under spring tension day after day. The dispenser box keeps the roll supported and lets you pull off just the length you're measuring, so the material stays flat and clean right up to the moment you cut it. It also makes storage between jobs simple, because the leftover fabric stays protected instead of loose in a garage.
One thing to know before you order: this roll does not include a cutting tool, and Dometic doesn't offer one for it. You'll want a sharp utility knife or a good pair of heavy shears and a straightedge to get a clean, square cut. A ragged edge frays faster, so it's worth taking your time here. You'll also reuse your existing end caps, the poly cord or spline that locks the fabric into the roller and the rail, and any tensioning hardware already on your topper. This is the fabric itself, not a complete topper kit.
Measuring is straightforward. With the slide retracted, measure the length of the roller tube from end to end, then add the small amount your instructions call for so the fabric seats into both the roller channel and the wall-mounted rail. Cut to that length, thread the two poly cords, roll it up under tension, and you're back in business. If you've never done it before, plan on an afternoon and a helper, because feeding a long topper onto a spring-loaded roller is a two-person job.
A quick note on fit: this is an RV product, built for slide-out toppers on campers and motorhomes, not for marine canvas or boat covers. If you're chasing a fabric for a boat, this isn't the right roll. But if your coach's slide topper has seen one too many summers, a fresh length off this Dometic roll is the difference between a slide that stays dry and one that lets water pour straight into the seal every time it rains.
Key Features
- 50-foot continuous roll of cut-to-fit fabric, enough to re-cover one long slide-out topper or several shorter ones
- 47.5-inch fabric width matches the standard size used on most RV slide-out toppers
- Black finish hides road grime, resists sun fade, and blends with almost any coach exterior
- Ships in a dispenser box that keeps the roll flat and crease-free until you measure and cut
- Cut-to-fit design lets you trim the exact length your slide needs instead of ordering a fixed size
- Genuine Dometic replacement material engineered for RV slide-out topper roller assemblies
- Reuses your existing arms, spring roller, end caps, and poly cords, so you replace only the worn fabric
- No cutting tool included, so plan to use a utility knife or shears with a straightedge
Why Buy from NVN Marine
- Authorized Dometic reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Genuine Dometic replacement fabric, cut to your exact slide length.
Technical specifications
| Title | Dometic Cut-To-Fit Slide Topper Replacement Fabric, 50ft Roll, Black |
|---|---|
| Brand | Dometic |
| Manufacturer Part Number | T3106802FJ.600 |
| UPC | 713814214425 |
| Product Type | RV Slide-Out Topper Fabric |
| Application | Slide Topper (Slide-Out) Awnings |
| Fabric Style | Cut-To-Fit Replacement Fabric |
| Roll Length | 50 Feet |
| Fabric Width | 47.5 Inches |
| Color | Black |
| Packaging | Dispenser Box Included |
| Cutting Tool | Not Included |
| Sold As | Bulk Continuous Roll |
Frequently asked questions
Can you just replace the fabric on a slide topper?
Yes. The arms, spring roller, and brackets on your rig are built to last, and the fabric is the part that wears out. This roll lets you swap the worn material and keep every other component in place.
What size slide will this roll cover?
The roll is 50 feet long and 47.5 inches wide, and you cut it to your slide's length. A typical 10 to 12 foot slide uses only a portion of the roll, leaving material for future repairs or additional slides.
Does it come with a cutting tool?
No. This roll does not include a cutting tool and Dometic does not offer one for it. Use a sharp utility knife or heavy shears with a straightedge for a clean, square cut.
What is the dispenser box for?
The box supports the roll so you can pull off just the length you need without kinking the material. Creases turn into weak spots under spring tension, so keeping the fabric flat until you cut it matters.
How do I measure my slide topper for replacement fabric?
With the slide retracted, measure the roller tube end to end, then add the small allowance your instructions specify so the fabric seats into both the roller channel and the wall rail before you cut.
Is this fabric for boats or RVs?
It's an RV product, made for slide-out toppers on fifth wheels, travel trailers, and motorhomes. It isn't intended for marine canvas or boat covers.
What color is the fabric?
Black. It's the most popular choice for slide toppers because it hides dirt, stands up to constant sun exposure, and works with nearly any coach paint scheme.
Is this genuine Dometic fabric?
Yes. It's Dometic manufacturer part number T3106802FJ.600, the same cut-to-fit slide topper material Dometic supplies for its topper roller assemblies.
Can one roll cover more than one slide?
It can, as long as the combined lengths fit within the 50-foot roll. Many owners re-cover two or three slides from a single roll, and repair shops work through it one job at a time.
Does the roll include arms or hardware?
No. This is the fabric only. You reuse your existing spring roller, arms, end caps, poly cords, and tensioning hardware. It is not a complete topper kit.
