{"product_id":"digital-yacht-ns8-8-port-gigabit-network-switch","title":"Digital Yacht NS8 8-Port Gigabit Marine Network Switch","description":"\u003cp class=\"nvn-hero\"\u003eThe Digital Yacht NS8 is an 8-port Gigabit network switch built for boats. Wire it straight to your 12, 24, or 48V DC supply, plug it into your router, and you've got eight more reliable RJ45 Ethernet ports for TVs, cameras, VOIP, and chart displays. DIN-rail mount and dual-redundant power make it a clean, permanent addition to any onboard network.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Digital Yacht NS8 is an 8-port Gigabit network switch built for the one place most consumer networking gear hates to live: a boat. If you've already got a wireless router or a 4G router wired in and you're running out of LAN ports, this is the clean way to expand. Plug one of the NS8's RJ45 sockets into a spare LAN port on your router, wire the switch straight to the boat's DC supply, and you've got eight more wired Ethernet connections ready to go.\u003c\/p\u003e\n\u003cp\u003eHere's why wired still matters onboard. WiFi is convenient, but for anything data-heavy, streaming TV at anchor, VOIP calls, security cameras, or moving chart and radar data between displays, a wired Ethernet run is faster and far more reliable. The NS8 gives you 10\/100\/1000 base-T ports, so it'll happily pass full Gigabit between devices that support it and step down to 100 or 10 for older gear. Your router keeps handing out IP addresses over DHCP to anything you plug in, so there's no configuration to fuss with. It's plug-and-play in the truest sense.\u003c\/p\u003e\n\u003cp\u003ePower is where this switch earns its keep on a boat. Instead of an AC adapter you'd have to run off an inverter, the NS8 runs directly from 12V, 24V, or 48V DC. That means it wires into the same house bank that feeds the rest of your electronics. It's also a low-power draw, so leaving it on doesn't punish your batteries at anchor. The dual redundancy power supply design gives you a second feed path, handy on a vessel where a single connection working loose in a seaway shouldn't take your whole network down.\u003c\/p\u003e\n\u003cp\u003eMounting is sorted too. The NS8 uses a standard DIN rail bracket, the common IEC\/EN 60715 35 by 7.5mm rail, and Digital Yacht includes a 100mm length of rail in the box. So you can snap it into an electronics locker, a nav-station cabinet, or an equipment panel and know it's not going to rattle loose. Each of the eight ports has its own yellow and green status LEDs, so a quick glance tells you which connections are live and which are actually passing traffic. When something's not talking, that's the first place you look.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Any boat that's outgrowing a single router. Center-console owners running multiple displays and a camera or two. Cruisers who've added a satellite or 4G router and want hardwired backhaul to a TV and a VOIP handset. Liveaboards stacking up connected gear faster than their router has ports. It pairs naturally with the rest of Digital Yacht's connectivity range, so if you're already running one of their 4G routers or an iNavHub, the NS8 slots right in.\u003c\/p\u003e\n\u003cp\u003eA couple of honest install notes from folks who've lived with these. Give it a dry, ventilated spot. Like any electronics, condensation is the enemy, and a switch buried in a damp locker won't last as long as one mounted where air moves. Use good shielded Cat5e or Cat6 cable and ground your runs properly, especially on powerboats where electrical noise can creep into sensitive electronics. Add a drip loop on every cable so water tracking down the jacket drips off before it reaches the port. And fuse the DC feed, then keep an eye on voltage on long cable runs from the panel. None of this is unique to the NS8, it's just good marine wiring practice, and this switch rewards it with years of quiet service.\u003c\/p\u003e\n\u003cp\u003eOne thing to know up front: the NS8 doesn't supply Power over Ethernet. If you're running PoE cameras or access points, you'll still power those devices separately. The NS8 handles the data side, moving packets reliably between all eight ports, and lets your existing power scheme handle the rest.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e8 RJ45 ports at 10\/100\/1000 base-T, so you get up to Gigabit speed and backward compatibility with older 10\/100 gear\u003c\/li\u003e\n  \u003cli\u003e12\/24\/48V DC operation wires straight to the house bank, no inverter or AC adapter needed\u003c\/li\u003e\n  \u003cli\u003eDual redundancy power supply design keeps the network up if one feed drops\u003c\/li\u003e\n  \u003cli\u003eLow-power draw is easy on the batteries for always-on use at anchor\u003c\/li\u003e\n  \u003cli\u003eDIN rail mount (IEC\/EN 60715, 35 x 7.5mm) with a 100mm rail included for a rattle-free install\u003c\/li\u003e\n  \u003cli\u003ePer-port yellow and green LEDs show power and live link status at a glance\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play with your existing router's DHCP, no configuration required\u003c\/li\u003e\n  \u003cli\u003eRugged build made for life onboard, not a repurposed office switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Digital Yacht reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the Digital Yacht NS8 do?\u003c\/summary\u003e\n    \u003cp\u003eIt expands the number of wired Ethernet connections on your boat. You connect one of its eight RJ45 ports to a LAN port on your existing router, and the other ports give you more hardwired connections for TVs, cameras, VOIP, and networked electronics.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many devices can I connect?\u003c\/summary\u003e\n    \u003cp\u003eThe NS8 has eight 10\/100\/1000 RJ45 ports. Typically one port runs back to your router, which leaves seven for devices. You can also chain another switch off one port if you need still more.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat voltage does it run on?\u003c\/summary\u003e\n    \u003cp\u003eIt runs directly from 12V, 24V, or 48V DC, so it wires into the same house bank that feeds the rest of your boat's electronics.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need an AC adapter or an inverter to power it?\u003c\/summary\u003e\n    \u003cp\u003eNo. The NS8 is designed for DC power, so there's no wall adapter and no need to run it off an inverter. It's also a low-power draw, which keeps it easy on the batteries.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow fast is it?\u003c\/summary\u003e\n    \u003cp\u003eIt supports 10\/100\/1000 base-T, meaning it can pass full Gigabit between devices that support it and step down to 100 or 10 Mbps for older gear.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount?\u003c\/summary\u003e\n    \u003cp\u003eIt mounts on a standard DIN rail using the included bracket, and Digital Yacht supplies a 100mm length of IEC\/EN 60715 35 by 7.5mm rail in the box. That lets you fix it securely in an electronics locker or equipment panel.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I have to configure it?\u003c\/summary\u003e\n    \u003cp\u003eNo. It's plug-and-play. Your router keeps handing out IP addresses over DHCP to anything you plug into the NS8, so there's no setup or management interface to deal with.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it supply Power over Ethernet (PoE)?\u003c\/summary\u003e\n    \u003cp\u003eNo. The NS8 moves data only. If you're running PoE cameras or access points, you'll need to power those devices separately.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat network cable should I use?\u003c\/summary\u003e\n    \u003cp\u003eUse RJ45 Cat 5 or Cat 6 cable. On a boat, shielded Cat5e or Cat6 with proper grounding is the safest choice for keeping electrical noise off your electronics.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhere should I mount it on the boat?\u003c\/summary\u003e\n    \u003cp\u003ePick a dry, ventilated spot. Condensation is hard on any electronics, so avoid damp lockers, and add a drip loop on each cable so water tracking down the jacket drips off before it reaches the port.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it work with my chartplotter and radar network?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's a standard base-T Ethernet switch, so it works with standard Ethernet-based marine networks and devices. For multi-display setups, confirm your displays use standard Ethernet and keep their firmware current for the smoothest connection.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's included in the box?\u003c\/summary\u003e\n    \u003cp\u003eYou get the NS8 network switch, a DIN rail mounting bracket, and a 100mm length of DIN rail.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eDigital Yacht NS8 Network Switch 8 Port\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eDigital Yacht\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eZDIGNS8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e703791696918\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eNumber of Ports\u003c\/th\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePort Type\u003c\/th\u003e\n\u003ctd\u003eRJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eEthernet Speed\u003c\/th\u003e\n\u003ctd\u003e10\/100\/1000 base-T (Gigabit)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating Voltage\u003c\/th\u003e\n\u003ctd\u003e12\/24\/48V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower Supply Design\u003c\/th\u003e\n\u003ctd\u003eDual redundancy\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eDIN Rail (IEC\/EN 60715, 35 x 7.5mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded Mounting Rail\u003c\/th\u003e\n\u003ctd\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCable Type\u003c\/th\u003e\n\u003ctd\u003eRJ45 Cat 5\/6\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eStatus Indicators\u003c\/th\u003e\n\u003ctd\u003ePower and per-port link\/activity LEDs (yellow and green)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eNS8 Network Switch, mounting bracket, 100mm rail\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Category\u003c\/th\u003e\n\u003ctd\u003eNavigation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the Digital Yacht NS8 do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It expands the number of wired Ethernet connections on your boat. You connect one of its eight RJ45 ports to a LAN port on your existing router, and the other ports give you more hardwired connections for TVs, cameras, VOIP, and networked electronics.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many devices can I connect?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The NS8 has eight 10\/100\/1000 RJ45 ports. Typically one port runs back to your router, which leaves seven for devices. You can also chain another switch off one port if you need still more.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What voltage does it run on?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It runs directly from 12V, 24V, or 48V DC, so it wires into the same house bank that feeds the rest of your boat's electronics.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need an AC adapter or an inverter to power it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The NS8 is designed for DC power, so there's no wall adapter and no need to run it off an inverter. It's also a low-power draw, which keeps it easy on the batteries.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How fast is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It supports 10\/100\/1000 base-T, meaning it can pass full Gigabit between devices that support it and step down to 100 or 10 Mbps for older gear.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It mounts on a standard DIN rail using the included bracket, and Digital Yacht supplies a 100mm length of IEC\/EN 60715 35 by 7.5mm rail in the box. That lets you fix it securely in an electronics locker or equipment panel.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I have to configure it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. It's plug-and-play. Your router keeps handing out IP addresses over DHCP to anything you plug into the NS8, so there's no setup or management interface to deal with.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it supply Power over Ethernet (PoE)?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The NS8 moves data only. If you're running PoE cameras or access points, you'll need to power those devices separately.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What network cable should I use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Use RJ45 Cat 5 or Cat 6 cable. On a boat, shielded Cat5e or Cat6 with proper grounding is the safest choice for keeping electrical noise off your electronics.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Where should I mount it on the boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Pick a dry, ventilated spot. Condensation is hard on any electronics, so avoid damp lockers, and add a drip loop on each cable so water tracking down the jacket drips off before it reaches the port.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it work with my chartplotter and radar network?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's a standard base-T Ethernet switch, so it works with standard Ethernet-based marine networks and devices. For multi-display setups, confirm your displays use standard Ethernet and keep their firmware current for the smoothest connection.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's included in the box?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"You get the NS8 network switch, a DIN rail mounting bracket, and a 100mm length of DIN rail.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":44785918476381,"sku":"1004591","price":170.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/112012XL.jpg?v=1784940327","url":"https:\/\/nvnmarine.com\/products\/digital-yacht-ns8-8-port-gigabit-network-switch","provider":"NVN Marine","version":"1.0","type":"link"}