Connect-Ease Quik One 12V Single Device Connection Kit
Connect-Ease Quik One 12V Single Device Connection Kit — Product description
The Connect-Ease Quik One is a plug-and-play kit that connects a single 12V device to your battery and lets you unplug it in seconds. No more wing nuts and loose ring terminals at the battery box. Marine-grade, lithium compatible, and ready for your trolling motor, livewell, or bilge pump.
The Connect-Ease Quik One is a plug-and-play connection kit that wires a single 12V device to your battery and lets you unplug it just as fast. It's the answer to the mess of loose ring terminals and wing nuts most of us have fought at the battery box. One clean connector, and your gear comes on and off in seconds.
Here's the setup. One harness lands on the battery with ring terminals. The other lands on your device. They meet at a keyed quick-connect, so there's no guessing polarity and no chance of crossing your leads in the dark. Pull into the ramp, unplug the device, lift your battery out for a charge, and you're done. Next trip, plug back in and go. The whole job takes basic hand tools and a few minutes at the battery box, and once it's in, you never touch a wing nut again.
What runs on it? Any single 12V load that lives on your boat. A small bow-mount trolling motor, a livewell pump, a bilge pump, an aerator, a set of deck lights, a fish finder power lead. If it draws 12 volts, the Quik One gives it a proper, repeatable home instead of a stack of alligator clips.
The components are marine-grade, so the connectors and terminals hold up to the spray, the humidity, and the vibration that kill cheap hardware. And it's lithium compatible, which matters more every season as anglers move their deep-cycle batteries over to lithium. Same kit, same connector, whatever your battery chemistry is.
One thing to be clear about. This is the single-device kit. It connects one device to one battery. If you're running a bank of batteries in parallel, or you need to feed several devices off the same pack, that's a different Connect-Ease kit, and we're happy to point you to the right one. For a clean, quick, one-and-done 12V hookup, this is it.
Key Features
- Plug-and-play quick-connect wires one 12V device to your battery and unplugs in seconds
- Keyed connector sets polarity for you, so you can't cross your leads at the battery box
- Marine-grade components stand up to spray, humidity, and vibration
- Lithium compatible, works whether your battery is lead-acid or lithium
- Fits any single 12V load: trolling motor, livewell, bilge pump, aerator, or deck lights
- Battery-side and device-side harnesses included for a complete hookup
Why Buy from NVN Marine
- Authorized Connect-Ease reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Connect-Ease Quik One 12V Single Device Connection Kit |
|---|---|
| Brand | Connect-Ease |
| Manufacturer Part Number | RCE12VB1K |
| UPC | 854996005309 |
| System Voltage | 12V |
| Connection Type | Plug & Play Quick-Connect |
| Battery Compatibility | Lithium Compatible |
| Construction | Marine-Grade Components |
| Devices Supported | Single 12V Device |
| Category | Electrical Accessories |
Frequently asked questions
What does the Quik One connect?
It connects one 12V device to one battery through a plug-and-play quick-connect. One harness goes on the battery, the other on your device, and they meet at a single keyed connector.
Is it lithium compatible?
Yes. The Quik One works whether your battery is a traditional deep-cycle lead-acid or a newer lithium pack. Same kit, same connector.
Can I run more than one device on it?
No, this is the single-device kit, one device to one battery. If you need to feed several devices or connect batteries in parallel, Connect-Ease makes other kits for that and we can point you to the right one.
What can I power with it?
Any single 12V load on the boat, a small bow-mount trolling motor, a livewell or bilge pump, an aerator, deck lights, or a power lead for electronics.
Does it make removing my battery easier?
That's the whole idea. Unplug the quick-connect and lift the battery out for a charge, then plug back in next trip. No wing nuts, no loose ring terminals.
Are the connectors marine-grade?
Yes. The components are marine-grade so the terminals and connector hold up to spray, humidity, and the vibration that ends cheap hardware early.