Connect-Ease Ignite 36V Single-Case Lithium Trolling Motor Kit
Connect-Ease Ignite 36V Single-Case Lithium Trolling Motor Kit — Product description
The Connect-Ease Ignite 36 is the plug-and-play wiring kit that connects a single-case 36V lithium battery to any 36V trolling motor. Six-gauge wire, a 60-amp resettable breaker, a negative ground block, and onboard charging leads, all in one harness. Battery and motor sold separately.
If you're rigging a 36V trolling motor to a single-case lithium battery, the Connect-Ease Ignite 36 is the wiring system that ties it all together. It's not the battery and it's not the motor. It's the connection kit that gets full voltage from one to the other, cleanly, with none of the guesswork that comes from cobbling together your own cables and lugs.
Here's what you get. Six-gauge marine-grade wire, sized to carry the current a 36V motor pulls at full thrust without dropping voltage on the way. A 60-amp resettable circuit breaker that protects the run and pops back on after a fault, so there's no fuse to dig for in the dark. A negative ground block for a clean, single-point ground. And integrated on-board charging leads, which is the part most people don't think about until they're unhooking cables every time they want to top off the battery.
That charging connection is the quiet hero here. You leave the motor wired, plug your charger into the leads, and you're done. No pulling the battery, no loosening lugs, no forgetting which cable went where.
The Ignite 36 is built for single-case 36V lithium batteries in the common 60 to 100 amp-hour range. It's optimized for lithium, and the plug-and-play connectors make battery removal foolproof at the end of the season or when you're swapping packs. It works with any brand of 36V trolling motor, so you're not locked into a particular motor to use it.
One thing to be clear on: the battery isn't included. This is the wiring and protection kit only. You bring the 36V single-case lithium battery and the motor, and the Ignite 36 handles the connection between them. If you're not sure whether your battery is a single-case 36V unit or three 12V batteries wired in series, give us a shout before ordering. We'll make sure you get the right Connect-Ease system for your setup.
Key Features
- 6-gauge marine-grade wire carries full 36V current from battery to motor without voltage drop
- 60-amp resettable circuit breaker protects the run and resets after a fault, so there's no fuse to replace
- Integrated on-board charging leads let you charge the battery in place without unhooking the motor
- Negative ground block included for a clean, single-point ground on the install
- Plug-and-play connections make rigging and end-of-season battery removal foolproof
- Works with any brand of 36V trolling motor paired to a single-case lithium battery
Why Buy from NVN Marine
- Authorized Connect-Ease reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Connect-Ease 36V Single Case Battery Trolling Motor System |
|---|---|
| Brand | Connect-Ease |
| Manufacturer Part Number | RCE36VSCK |
| UPC | 854996005538 |
| Model | Ignite 36 |
| System Voltage | 36V |
| Wire Gauge | 6-gauge marine-grade |
| Circuit Breaker | 60-amp resettable |
| Ground | Negative ground block included |
| Charging | Integrated on-board charging leads |
| Battery Compatibility | Any 36V single-case lithium battery (60 to 100Ah) |
| Motor Compatibility | Any brand 36V trolling motor |
| Connection Type | Plug-and-play |
| Battery Included | No |
Frequently asked questions
What does this kit actually connect?
It wires a single-case 36V lithium battery to your 36V trolling motor. It's the cables, breaker, ground block, and charging leads, not the battery or the motor themselves.
Is the battery included?
No. This is the wiring and protection kit only. You supply the 36V single-case lithium battery and the trolling motor.
Will it work with my trolling motor?
It works with any brand of 36V trolling motor. As long as your motor runs on 36 volts, the Ignite 36 handles the connection.
What size battery is it built for?
It's designed for single-case 36V lithium batteries in the common 60 to 100 amp-hour range. The 6-gauge wire and 60-amp breaker are sized to handle the current those setups pull.
Can I charge the battery without unhooking the motor?
Yes. The integrated on-board charging leads let you plug in a charger and top off the battery while everything stays wired. No pulling lugs or cables.
Is the circuit breaker resettable?
Yes. It's a 60-amp resettable breaker, so after a fault trips it you just reset it. There's no fuse to carry a spare for.
Is this only for lithium batteries?
It's optimized for single-case 36V lithium batteries. That's what the Ignite 36 was built around.