{"product_id":"coleman-mach-10-low-profile-ac-shroud-black-45203-5291","title":"Coleman-Mach 10 Low Profile RV Air Conditioner Shroud, Black","description":"\u003cp class=\"nvn-hero\"\u003eThe factory replacement shroud for a Coleman 4500 Series Mach 10 rooftop air conditioner. Textured black polypropylene, molded low-profile to match the slim Mach 10 line. Coleman part 45203-5291. Swap a cracked or sun-faded cover and get your rig's rooftop unit looking right again without replacing the whole A\/C.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe shroud is the plastic cover that sits over your rooftop air conditioner, and on a Coleman 4500 Series Mach 10 it takes a real beating. Sun, hail, low branches, highway debris. After a few seasons that once-clean cover fades, crazes, and eventually cracks. This is the factory replacement for it. Coleman part number 45203-5291, molded in textured black polypropylene, shaped to match the slim low-profile Mach 10 line.\u003c\/p\u003e\n\u003cp\u003eHere's the thing to understand up front. You're buying the shroud, not the air conditioner. The shroud is the outer skin. It protects the coil, the fan, and the wiring underneath from weather and UV. When it breaks, the guts of the unit are usually still fine, so there's no reason to spend on a whole new A\/C. You swap the cover and you're back in business.\u003c\/p\u003e\n\u003cp\u003eIt fits the Coleman 4500 Series Mach 10, and the same shell works across the 3500 Series Mach 10 units too. If your rooftop unit is the low-profile Mach 10, this is the cover it wants. The Mach 10 is that popular slim design that stands just over eleven inches tall, the one a lot of travel trailers and fifth wheels came with because it keeps overall height down for garages and low clearances. This shroud keeps that same low silhouette. Drop in a taller cover and you give up the clearance you bought the Mach 10 for in the first place.\u003c\/p\u003e\n\u003cp\u003eThe material matters on a roof. Polypropylene handles temperature swings and constant UV better than cheaper plastics, and the textured black finish hides scuffs and hard-water spots that show up fast on a smooth white cover. Black does run warmer in full sun than white, so if your rig bakes in a desert site all summer, that's worth knowing. For most owners the tradeoff is the look and the durability, and plenty of folks prefer the blacked-out roof anyway.\u003c\/p\u003e\n\u003cp\u003eInstall is straightforward for anyone comfortable on a ladder. Kill the breaker, pull the old shroud's fasteners, lift the damaged cover off, set the new one over the base, and re-secure it. This part ships as the shroud by itself, so plan to reuse your existing screws and foam gasket. If your old gasket is torn or hardened, grab a fresh one at the same time so the new cover seals clean and you don't chase a leak later. Take your time lining up the fastener holes before you drive anything, and don't overtighten. Polypropylene doesn't love being cranked down hard.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Anyone with a faded, cracked, or storm-hit Mach 10 shroud who wants the unit looking right and sealed up again. RV owners after a hail season. Someone who bought a used trailer with a sun-rotted cover. A dealer or tech doing a clean cosmetic refresh before resale. It's a simple part, but it's the difference between a roof that looks tired and one that looks cared for, and it keeps water and UV off the components that actually matter. That's a lot of value for one molded cover.\u003c\/p\u003e\n\u003cp\u003eWhat it isn't: it's not a performance upgrade, and it won't change your cooling. The Mach 10 puts out its rated 13,500 BTU with the old cover or the new one. The shroud's job is protection and looks, full stop. And it's model-specific, so if you're not running a Mach 10, double-check your unit before you order. The wrong shroud won't sit right on a different A\/C base.\u003c\/p\u003e\n\u003cp\u003eBottom line, this is the honest fix. Factory part, correct fit, keeps your rig's roofline low, and gets your Mach 10 back in shape without the cost of a full replacement. If you're not sure which Coleman unit you've got up top, send us a photo of the label and we'll help you confirm before you buy.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eDirect factory replacement shroud (MPN 45203-5291) for Coleman 4500 Series Mach 10 rooftop air conditioners, keeps the original low-profile look\u003c\/li\u003e\n  \u003cli\u003eTextured black polypropylene stands up to sun, rain, and road debris up on the roof and hides scuffs better than a smooth white cover\u003c\/li\u003e\n  \u003cli\u003eLow-profile design matches the slim Mach 10 line so your rig keeps its clearance for garages and low bridges\u003c\/li\u003e\n  \u003cli\u003eAlso fits the 3500 Series Mach 10 units, same shell across the low-profile line\u003c\/li\u003e\n  \u003cli\u003eCovers a cracked, faded, or storm-damaged shroud without touching the A\/C's coil, fan, or wiring\u003c\/li\u003e\n  \u003cli\u003eShips as the shroud only, so you reuse your existing mounting hardware and gasket for a clean seal\u003c\/li\u003e\n  \u003cli\u003eMolded by Coleman RVP, the part your dealer and tech will recognize by number\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Coleman reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes this include the air conditioner or just the shroud?\u003c\/summary\u003e\n    \u003cp\u003eJust the shroud. This is the outer plastic cover for a Coleman 4500 Series Mach 10, not the cooling unit. The coil, fan, and controls underneath aren't included and don't need to be, since the shroud only protects them.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat air conditioners does the 45203-5291 shroud fit?\u003c\/summary\u003e\n    \u003cp\u003eIt fits the Coleman 4500 Series Mach 10 low-profile rooftop air conditioner, and the same shell works on the 3500 Series Mach 10. If your rooftop unit is a low-profile Mach 10, this is the correct cover.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the shroud made of?\u003c\/summary\u003e\n    \u003cp\u003eTextured black polypropylene. It's molded to shrug off sun, rain, and road debris up on the roof, and the textured finish hides scuffs better than a smooth cover.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill a black shroud get hotter than a white one?\u003c\/summary\u003e\n    \u003cp\u003eBlack does absorb more heat in direct sun than white, so a rig parked in full desert sun all day will run a bit warmer on the roof surface. For most owners the durable finish and the blacked-out look are worth it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes replacing the shroud change how well the A\/C cools?\u003c\/summary\u003e\n    \u003cp\u003eNo. The Mach 10 still puts out its rated 13,500 BTU with the new cover. The shroud's only job is to protect the internals and keep the unit looking right. It doesn't touch performance.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with mounting hardware or a gasket?\u003c\/summary\u003e\n    \u003cp\u003eIt ships as the shroud only. Plan to reuse your existing screws and foam gasket. If the old gasket is torn or hardened, replace it at the same time so the new cover seals clean and you don't chase a leak later.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy is it low profile?\u003c\/summary\u003e\n    \u003cp\u003eThe Mach 10 is Coleman's slim rooftop line that stands just over eleven inches tall, which keeps overall rig height down for garages and low clearances. This shroud keeps that same low silhouette instead of adding height.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow hard is it to install?\u003c\/summary\u003e\n    \u003cp\u003eIt's a straightforward job for anyone comfortable on a ladder. Kill the breaker, remove the old shroud's fasteners, lift it off, set the new cover over the base, and re-secure it. Line up the holes before driving screws and don't overtighten the polypropylene.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I know if I have a Mach 10 up top?\u003c\/summary\u003e\n    \u003cp\u003eCheck the model label on the rooftop unit or the paperwork that came with your rig. If you're unsure, send us a photo of the label and we'll confirm the right shroud before you order.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eLow Profile Replacement For Coleman 4500 Series Mach 10 Air Conditioner, Black, Polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eColeman\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eColeman RVP\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e45203-5291\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e755790408993\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAir Conditioner Shroud (Replacement)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eColeman 3500 and 4500 Series Mach 10 Air Conditioner\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eLow Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eTextured\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackage Contents\u003c\/th\u003e\n\u003ctd\u003e(1) Shroud\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does this include the air conditioner or just the shroud?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Just the shroud. This is the outer plastic cover for a Coleman 4500 Series Mach 10, not the cooling unit. The coil, fan, and controls underneath aren't included and don't need to be, since the shroud only protects them.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What air conditioners does the 45203-5291 shroud fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It fits the Coleman 4500 Series Mach 10 low-profile rooftop air conditioner, and the same shell works on the 3500 Series Mach 10. If your rooftop unit is a low-profile Mach 10, this is the correct cover.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the shroud made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Textured black polypropylene. It's molded to shrug off sun, rain, and road debris up on the roof, and the textured finish hides scuffs better than a smooth cover.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will a black shroud get hotter than a white one?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Black does absorb more heat in direct sun than white, so a rig parked in full desert sun all day will run a bit warmer on the roof surface. For most owners the durable finish and the blacked-out look are worth it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does replacing the shroud change how well the A\/C cools?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The Mach 10 still puts out its rated 13,500 BTU with the new cover. The shroud's only job is to protect the internals and keep the unit looking right. It doesn't touch performance.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with mounting hardware or a gasket?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It ships as the shroud only. Plan to reuse your existing screws and foam gasket. If the old gasket is torn or hardened, replace it at the same time so the new cover seals clean and you don't chase a leak later.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why is it low profile?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The Mach 10 is Coleman's slim rooftop line that stands just over eleven inches tall, which keeps overall rig height down for garages and low clearances. This shroud keeps that same low silhouette instead of adding height.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How hard is it to install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a straightforward job for anyone comfortable on a ladder. Kill the breaker, remove the old shroud's fasteners, lift it off, set the new cover over the base, and re-secure it. Line up the holes before driving screws and don't overtighten the polypropylene.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I know if I have a Mach 10 up top?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Check the model label on the rooftop unit or the paperwork that came with your rig. If you're unsure, send us a photo of the label and we'll confirm the right shroud before you order.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Coleman","offers":[{"title":"Default Title","offer_id":45000278442077,"sku":"2007856","price":264.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_971c9048-1c9a-4463-a46b-f25ea5c5b00e.jpg?v=1788728890","url":"https:\/\/nvnmarine.com\/products\/coleman-mach-10-low-profile-ac-shroud-black-45203-5291","provider":"NVN Marine","version":"1.0","type":"link"}