{"product_id":"coleman-mach-10-low-profile-a-c-shroud-45203-5261-white","title":"Coleman Mach 10 Low Profile A\/C Shroud, Arctic White (45203-5261)","description":"\u003cp class=\"nvn-hero\"\u003eIf the shroud on your Coleman Mach 10 is cracked, faded, or took a hit from a low branch, this is the exact replacement. It's the low-profile Arctic White cover for the 4500 Series Mach 10 rooftop air conditioner, molded from UV-stabilized polypropylene. It bolts back on over your existing unit, no rewiring and no refrigerant work.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe shroud is the plastic outer cover that sits over your rooftop air conditioner. It's what gives the Mach 10 that clean, low-profile look, and it's the part that takes all the abuse up top. Sun, hail, road grit, the occasional low tree limb at a campground. Over enough seasons the original cover cracks at the corners, hazes over, or yellows out. When that happens you don't need a whole new air conditioner. You need this.\u003c\/p\u003e\n\u003cp\u003eThis is the genuine Coleman low-profile replacement shroud for the 4500 Series Mach 10, part number 45203-5261, in Arctic White. It's molded from co-polymer polypropylene with UV stabilizers built into the material, so it holds its color and stays flexible in the sun a lot longer than a bargain cover would. The low-profile shape is the same one Coleman uses on the factory Mach 10, standing right around 11 inches tall on the roof, which keeps your overall height down for garages, low clearances, and better fuel economy down the highway.\u003c\/p\u003e\n\u003cp\u003eFitment matters here, so let's be clear about it. This shroud is built for the Coleman 4500 Series Mach 10 air conditioner. It is not a universal cover. Before you order, get a look at your existing unit and confirm you've got a Mach 10 low-profile up there. If your rig came with a different Coleman model, or a taller standard-profile unit, this won't be the right shape. The Mach 10 shroud is a specific footprint, roughly 38 inches long by 26 inches wide, and it seats onto the Mach 10 base.\u003c\/p\u003e\n\u003cp\u003eReplacing it is a job most RV owners can knock out themselves in an afternoon. You're not touching the refrigerant, the compressor, or any of the electrical. The shroud simply lifts off once you back out the mounting screws, and the new one drops right into place. Get up on the roof safely, pull the old cracked cover, set the new shroud over the unit, and reinstall the fasteners. That's it. No vacuum pump, no gauges, no charge.\u003c\/p\u003e\n\u003cp\u003eWhy bother replacing a cracked shroud at all? Two reasons. First, looks. A yellowed, spider-cracked cover makes an otherwise clean rig look tired, and a fresh Arctic White shroud brings the roofline right back. Second, and more important, the shroud is doing a real job up there. It protects the coils, the fan, and the wiring from rain, UV, and debris. A cracked cover lets water and grit into places you don't want them, and that's how a cheap plastic problem turns into an expensive compressor problem. Swapping the shroud early is cheap insurance.\u003c\/p\u003e\n\u003cp\u003eWho ends up needing one of these? Usually it's owners of older travel trailers and fifth wheels whose factory shroud has baked in the desert sun for years, plus anyone who's clipped a low branch, a gas-station canopy, or a garage header. Hail is a big one too. A good hailstorm can crack or shatter a brittle old cover in a single afternoon. And if you run two rooftop units and only one shroud is damaged, it's worth putting a fresh Arctic White cover on both so the roof matches. A single bright-white shroud next to a yellowed one stands out more than you'd think.\u003c\/p\u003e\n\u003cp\u003eA couple of practical notes from folks who've done this swap. Work on a calm day, because a big flat panel like this catches wind and you don't want it sailing off the roof. Bring the old shroud down and lay the new one next to it before you toss anything, just to eyeball that the mounting points line up. And check your gasket and seals while you're up there, since the roof is already open. If the foam gasket under the unit is flattened or crumbling, that's the time to deal with it.\u003c\/p\u003e\n\u003cp\u003eBottom line, if your Mach 10's cover is showing its age, this is the correct genuine replacement, in the right color, ready to bolt on. It ships covered by a 90-day limited warranty. Order the shroud, pick a calm afternoon, and your rooftop AC looks and seals like new again.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eGenuine Coleman low-profile replacement shroud for the 4500 Series Mach 10, part number 45203-5261\u003c\/li\u003e\n  \u003cli\u003eMolded from co-polymer polypropylene with UV stabilizers to resist fading, yellowing, and cracking\u003c\/li\u003e\n  \u003cli\u003eArctic White finish matches the factory Mach 10 roofline, molded in color so there's no paint to chip\u003c\/li\u003e\n  \u003cli\u003eLow-profile design keeps the rooftop unit near 11 inches tall for low clearances and better fuel economy\u003c\/li\u003e\n  \u003cli\u003eFits the Coleman 4500 Series Mach 10 footprint, roughly 38 inches long by 26 inches wide\u003c\/li\u003e\n  \u003cli\u003eCovers and protects the AC coils, fan, and wiring from rain, sun, and road debris\u003c\/li\u003e\n  \u003cli\u003eInstalls with basic hand tools, no refrigerant or electrical work required\u003c\/li\u003e\n  \u003cli\u003eShips as a single shroud, covered by a 90-day limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Coleman reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this the whole air conditioner or just the cover?\u003c\/summary\u003e\n    \u003cp\u003eJust the cover. This is the replacement shroud, the plastic outer dome that sits over your rooftop unit. It doesn't include the compressor, coils, fan, or any electrical parts. If your Mach 10 runs fine but the cover is cracked or faded, this is the part you want.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does this shroud fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's built for the Coleman 4500 Series Mach 10 air conditioner. It's a model-specific shroud, not a universal cover, so it only fits that unit's footprint of roughly 38 inches by 26 inches.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I know if I have a Mach 10?\u003c\/summary\u003e\n    \u003cp\u003eCheck the label on your rooftop unit, either from up on the roof or on the paperwork that came with the rig. It'll list the Coleman model. You're looking for a 4500 Series Mach 10 low-profile. If you've got a different Coleman model or a taller standard-profile unit, this shroud won't be the right shape.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is it made of?\u003c\/summary\u003e\n    \u003cp\u003eCo-polymer polypropylene with UV stabilizers in the material. That's what lets it hold the Arctic White color and keeps it from getting brittle out in the sun, which is exactly where the original cover usually fails.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need special tools to install it?\u003c\/summary\u003e\n    \u003cp\u003eNo. Basic hand tools to back out the mounting screws are all you need. There's no vacuum pump, no gauges, nothing specialized.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I have to touch the refrigerant?\u003c\/summary\u003e\n    \u003cp\u003eNo. The shroud is purely the outer cover. You're not opening the sealed refrigerant system, so there's no pump-down, no recharge, and no risk to the cooling side. That's what makes this a safe do-it-yourself job.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy replace a cracked shroud instead of leaving it?\u003c\/summary\u003e\n    \u003cp\u003eA cracked or hazed cover isn't just cosmetic. It's the barrier that keeps rain, UV, and grit off the coils, fan, and wiring. Leave it cracked and you're inviting water and debris into the parts that actually cost money. Replacing the shroud early is cheap protection for the whole unit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is it and will it match my roof?\u003c\/summary\u003e\n    \u003cp\u003eArctic White, the same shade Coleman uses on the factory Mach 10. It's molded in color, so there's no paint to chip or peel over time.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with mounting hardware or a gasket?\u003c\/summary\u003e\n    \u003cp\u003eIt ships as the shroud only, one cover in the box. Reuse your existing mounting screws. If the roof gasket under the unit is flattened or crumbling while you've got it open, that's a good time to replace it separately.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow tall does it sit on the roof?\u003c\/summary\u003e\n    \u003cp\u003eThe Mach 10 is a low-profile unit, standing right around 11 inches tall on the roof, and this shroud keeps that same low profile. It won't add height, which is handy if you park in a garage or run roads with low clearances.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the warranty?\u003c\/summary\u003e\n    \u003cp\u003eIt carries a 90-day limited warranty. We're an authorized Coleman reseller, so any warranty question runs through us.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eColeman Mach 10 Low Profile A\/C Shroud, Arctic White\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eColeman\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e45203-5261\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e755790408986\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eColeman RVP\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eArctic White\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCo-Polymer Polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eLow Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eColeman 4500 Series Mach 10 Air Conditioner\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e38 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e26-1\/10 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUV Stabilized\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIncluded in Box\u003c\/th\u003e\n\u003ctd\u003e(1) Shroud\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e90-Day Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eRV Air Conditioner Shroud\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this the whole air conditioner or just the cover?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Just the cover. This is the replacement shroud, the plastic outer dome that sits over your rooftop unit. It doesn't include the compressor, coils, fan, or any electrical parts. If your Mach 10 runs fine but the cover is cracked or faded, this is the part you want.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does this shroud fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built for the Coleman 4500 Series Mach 10 air conditioner. It's a model-specific shroud, not a universal cover, so it only fits that unit's footprint of roughly 38 inches by 26 inches.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I know if I have a Mach 10?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Check the label on your rooftop unit, either from up on the roof or on the paperwork that came with the rig. It'll list the Coleman model. You're looking for a 4500 Series Mach 10 low-profile. If you've got a different Coleman model or a taller standard-profile unit, this shroud won't be the right shape.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is it made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Co-polymer polypropylene with UV stabilizers in the material. That's what lets it hold the Arctic White color and keeps it from getting brittle out in the sun, which is exactly where the original cover usually fails.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need special tools to install it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. Basic hand tools to back out the mounting screws are all you need. There's no vacuum pump, no gauges, nothing specialized.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I have to touch the refrigerant?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The shroud is purely the outer cover. You're not opening the sealed refrigerant system, so there's no pump-down, no recharge, and no risk to the cooling side. That's what makes this a safe do-it-yourself job.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why replace a cracked shroud instead of leaving it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A cracked or hazed cover isn't just cosmetic. It's the barrier that keeps rain, UV, and grit off the coils, fan, and wiring. Leave it cracked and you're inviting water and debris into the parts that actually cost money. Replacing the shroud early is cheap protection for the whole unit.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is it and will it match my roof?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Arctic White, the same shade Coleman uses on the factory Mach 10. It's molded in color, so there's no paint to chip or peel over time.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with mounting hardware or a gasket?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It ships as the shroud only, one cover in the box. Reuse your existing mounting screws. If the roof gasket under the unit is flattened or crumbling while you've got it open, that's a good time to replace it separately.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How tall does it sit on the roof?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The Mach 10 is a low-profile unit, standing right around 11 inches tall on the roof, and this shroud keeps that same low profile. It won't add height, which is handy if you park in a garage or run roads with low clearances.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the warranty?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It carries a 90-day limited warranty. We're an authorized Coleman reseller, so any warranty question runs through us.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Coleman","offers":[{"title":"Default Title","offer_id":45000273133661,"sku":"2007855","price":264.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_97428575-c3c9-4ab9-bf33-bfc882b7bb11.jpg?v=1788728191","url":"https:\/\/nvnmarine.com\/products\/coleman-mach-10-low-profile-a-c-shroud-45203-5261-white","provider":"NVN Marine","version":"1.0","type":"link"}