{"product_id":"coleman-1472-1161-rv-ac-blower-wheel-models-6535-46515","title":"Coleman 1472-1161 Outdoor Air Conditioner Blower Wheel","description":"\u003cp class=\"nvn-hero\"\u003eThe Coleman 1472-1161 is the outdoor blower wheel that moves air across the condenser coil on your rooftop AC. It's the exact replacement for Coleman models 6535, 6536, 6537, 6636, 6795 and 46515. Molded plastic, 1\/2-inch bore, 11-1\/16-inch diameter. When your unit still runs but airflow drops off, this is usually the part to check first.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Coleman 1472-1161 is the outdoor blower wheel for a whole run of Coleman rooftop air conditioners, and it does one job that matters a lot on a hot afternoon. It spins inside the condenser section of the unit and pulls air across the condenser coil so the system can dump heat. When that wheel is turning clean and true, your AC keeps up. When it cracks, warps, or throws a blade, you get weak airflow, a compressor that runs hot, and a rig that just won't cool down the way it used to.\u003c\/p\u003e\n\u003cp\u003eThis is the factory replacement for Coleman models 6535, 6536, 6537, 6636, 6795, and 46515. If your rooftop unit is one of those, the 1472-1161 is the part that drops in. Before you order, it's worth pulling the shroud and reading the tag on your air conditioner so you know exactly which model you've got. Rooftop units look similar from the ladder, but the internals aren't always interchangeable, and matching the model number is the fastest way to be sure you're getting the right wheel the first time.\u003c\/p\u003e\n\u003cp\u003eThe wheel is molded plastic with a 1\/2-inch bore, an 11-1\/16-inch diameter, and it stands about 8 inches tall. It's built to turn clockwise. Those three numbers, bore, diameter, and rotation, are what actually decide whether a blower wheel fits and works, so if you're cross-checking against the part in your hand, that's what to measure. The 1\/2-inch bore slips onto the condenser motor shaft, and a set screw locks it in place.\u003c\/p\u003e\n\u003cp\u003eSo how do you know it's the wheel and not something else? A few tells. The unit powers on, the fan motor hums, but the air coming off the condenser side feels weak. Or you hear a new rattle, wobble, or scraping sound up top that tracks with fan speed. Plastic blower wheels take a beating over the years, sun, heat cycles, and road vibration, and they eventually crack at the hub or lose a fin. A wheel that's out of balance will shake the whole shroud and can chew up the motor bearings if you leave it, so it's worth catching early.\u003c\/p\u003e\n\u003cp\u003eReplacing it is a reasonable afternoon job for anyone comfortable working on the roof of their rig. You'll kill power to the unit first, pull the outer shroud, and get eyes on the condenser fan assembly. The old wheel comes off the motor shaft once you back out the set screw, and the new one goes on the same way. The thing most folks get wrong is wheel position on the shaft, so note how far the old one sits before you pull it, and set the new one to match so it stays centered in its housing and clears the shroud. Snug the set screw on the flat of the shaft, spin it by hand to confirm it turns free, and put the shroud back on.\u003c\/p\u003e\n\u003cp\u003eA couple of honest notes. This is the outdoor, or condenser-side, wheel, not the indoor blower that pushes cold air into the coach. If your airflow problem is on the inside of the rig, that's a different part. And this is a bare wheel, not a motor and not a complete fan kit, so if your condenser motor is the thing that's failed, you'll want that separately. Match the part to the symptom and you'll only buy it once.\u003c\/p\u003e\n\u003cp\u003eColeman has been building outdoor gear for close to a century, and the RV air side of the house makes a lot of the rooftop units you see in campgrounds everywhere. Running the factory 1472-1161 wheel means you get the right bore, the right diameter, and the right rotation without guessing, so your AC goes back to moving air the way it did the day it left the factory. Keep one on the shelf if you camp in the heat. It's a cheap part that keeps an expensive unit healthy.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eFactory replacement blower wheel for Coleman rooftop AC models 6535, 6536, 6537, 6636, 6795 and 46515, so it drops into the unit you already own\u003c\/li\u003e\n  \u003cli\u003e11-1\/16-inch diameter matched to the original housing for full airflow across the condenser coil\u003c\/li\u003e\n  \u003cli\u003e1\/2-inch bore slips onto the condenser motor shaft and locks with the existing set screw\u003c\/li\u003e\n  \u003cli\u003eClockwise rotation matches the factory condenser fan direction\u003c\/li\u003e\n  \u003cli\u003eRoughly 8-inch height keeps the wheel centered and clear inside the shroud\u003c\/li\u003e\n  \u003cli\u003eMolded plastic construction stands up to sun, heat cycles, and road vibration\u003c\/li\u003e\n  \u003cli\u003eOutdoor condenser-side wheel, the part that moves heat out of the unit on hot days\u003c\/li\u003e\n  \u003cli\u003eGenuine Coleman part number 1472-1161 takes the guesswork out of matching bore, diameter, and rotation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Coleman reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich Coleman air conditioner models does the 1472-1161 fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's the factory replacement outdoor blower wheel for Coleman rooftop AC models 6535, 6536, 6537, 6636, 6795, and 46515. Check the model tag on your unit before ordering to confirm you have one of these.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this the indoor or the outdoor blower wheel?\u003c\/summary\u003e\n    \u003cp\u003eThis is the outdoor, condenser-side wheel. It moves air across the condenser coil to push heat out of the unit. It is not the indoor blower that circulates cold air into the coach.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size is the bore?\u003c\/summary\u003e\n    \u003cp\u003eThe bore is 1\/2 inch. It slips onto the condenser motor shaft and is held by a set screw.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the diameter of the wheel?\u003c\/summary\u003e\n    \u003cp\u003eThe wheel measures 11-1\/16 inches in diameter and stands about 8 inches tall, matched to the original housing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich direction does it spin?\u003c\/summary\u003e\n    \u003cp\u003eIt's built to turn clockwise, matching the factory condenser fan rotation. Rotation is one of the things that has to match for a blower wheel to work correctly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is it made of?\u003c\/summary\u003e\n    \u003cp\u003eIt's molded plastic, the same material as the original wheel. Plastic keeps the weight down and holds up to the sun, heat cycles, and vibration a rooftop unit sees.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes this come with the fan motor?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is the bare blower wheel only. If your condenser motor has failed, you'll need that as a separate part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I know if my blower wheel needs replacing?\u003c\/summary\u003e\n    \u003cp\u003eCommon signs are weak airflow off the condenser side while the fan motor still runs, or a new rattle, wobble, or scraping sound up top that changes with fan speed. Cracked hubs and missing fins are typical failure points on older plastic wheels.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow is the wheel held onto the motor shaft?\u003c\/summary\u003e\n    \u003cp\u003eThe 1\/2-inch bore fits over the motor shaft and a set screw tightens against the flat of the shaft to lock it in place. Note the old wheel's position on the shaft before removing it so the new one sits centered in the housing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a genuine Coleman part?\u003c\/summary\u003e\n    \u003cp\u003eYes, it's the genuine Coleman part number 1472-1161. Running the factory wheel means the bore, diameter, and rotation all match without guessing.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eColeman 1472-1161 Outdoor Air Conditioner Blower Wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eColeman\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e1472-1161\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e755790407682\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOutdoor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e11-1\/16 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBore Size\u003c\/th\u003e\n\u003ctd\u003e1\/2 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e8 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003eClockwise\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Models\u003c\/th\u003e\n\u003ctd\u003eColeman 6535, 6536, 6537, 6636, 6795, 46515\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eOutdoor condenser unit\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which Coleman air conditioner models does the 1472-1161 fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the factory replacement outdoor blower wheel for Coleman rooftop AC models 6535, 6536, 6537, 6636, 6795, and 46515. Check the model tag on your unit before ordering to confirm you have one of these.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this the indoor or the outdoor blower wheel?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This is the outdoor, condenser-side wheel. It moves air across the condenser coil to push heat out of the unit. It is not the indoor blower that circulates cold air into the coach.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size is the bore?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The bore is 1\/2 inch. It slips onto the condenser motor shaft and is held by a set screw.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the diameter of the wheel?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The wheel measures 11-1\/16 inches in diameter and stands about 8 inches tall, matched to the original housing.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which direction does it spin?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built to turn clockwise, matching the factory condenser fan rotation. Rotation is one of the things that has to match for a blower wheel to work correctly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is it made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's molded plastic, the same material as the original wheel. Plastic keeps the weight down and holds up to the sun, heat cycles, and vibration a rooftop unit sees.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does this come with the fan motor?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This is the bare blower wheel only. If your condenser motor has failed, you'll need that as a separate part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I know if my blower wheel needs replacing?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Common signs are weak airflow off the condenser side while the fan motor still runs, or a new rattle, wobble, or scraping sound up top that changes with fan speed. Cracked hubs and missing fins are typical failure points on older plastic wheels.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How is the wheel held onto the motor shaft?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The 1\/2-inch bore fits over the motor shaft and a set screw tightens against the flat of the shaft to lock it in place. Note the old wheel's position on the shaft before removing it so the new one sits centered in the housing.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a genuine Coleman part?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, it's the genuine Coleman part number 1472-1161. Running the factory wheel means the bore, diameter, and rotation all match without guessing.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Coleman","offers":[{"title":"Default Title","offer_id":45060037410909,"sku":"2008488","price":110.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_b9a8adab-9600-4ad7-a36a-3c421de3dc45.jpg?v=1789525727","url":"https:\/\/nvnmarine.com\/products\/coleman-1472-1161-rv-ac-blower-wheel-models-6535-46515","provider":"NVN Marine","version":"1.0","type":"link"}