Carver Pontoon Console Cover Haze Gray | 61063F-10
Carver Pontoon Console Cover Haze Gray | 61063F-10 — Product description
The Carver Poly-Flex II Pontoon Console Cover keeps sun, rain, and mildew off the helm station on your pontoon. Marine-grade polyester in Haze Gray, sized to drape a standard console and protect the gauges, switches, and wheel while the boat sits.
The Carver Poly-Flex II Pontoon Console Cover slips over the helm station on your pontoon and keeps the weather off the part of the boat you touch most. Gauges, switches, the wheel, the upholstery on the console, all of it takes a beating from sun and rain when the boat sits. This cover shuts that down.
It's cut to a 33 inch height, 32 inch length, and 36 inch width, sized to drape over a standard pontoon console and dash. The fabric is Carver's Poly-Flex II, a marine-grade polyester that's water repellent, UV resistant, and treated to fight mildew. That combination is what you want on a cover that lives outside. Water beads and runs off instead of soaking in, the color holds up to season after season of sun, and the mildew treatment keeps that musty gray bloom from setting into the weave.
The Haze Gray finish is neutral. It won't clash with a red, blue, or tan pontoon, and it hides road dust better than a light color when you're trailering.
Who's this for? Anyone who leaves a pontoon at the dock, on a lift, or on the trailer between weekends. The console is where the money sits, the electronics and the controls, and it's the first thing to fade and crack if you leave it bare in the sun. A console cover is a lot cheaper than a new dash panel or a set of sun-baked gauges.
Slip it on when you're done for the day, pull it off when you're ready to run. It's not a mooring cover for the whole boat, so if you want coverage over the seats and deck too, you'll want to pair it with a full pontoon cover. This one's job is the console, and it does that one job well. Fold it up when it's not on the boat and it stows small in a bow locker or the truck.
Key Features
- Poly-Flex II marine-grade polyester, water repellent so rain beads and runs off
- UV-resistant fabric that holds its color through repeated sun exposure
- Mildew-resistant treatment keeps musty growth out of the weave
- Sized 33 in H x 32 in L x 36 in W to drape a standard pontoon console
- Haze Gray finish hides dust and pairs with any hull color
- Protects gauges, switches, wheel, and console upholstery from sun and rain
- Slips on and off in seconds for dock, lift, or trailer storage
Why Buy from NVN Marine
- Authorized Carver by Covercraft reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Carver Poly-Flex II Pontoon Console Cover, Haze Gray |
|---|---|
| Brand | Carver by Covercraft |
| Manufacturer Part Number | 61063F-10 |
| UPC | 194092069110 |
| Product Type | Pontoon Console Cover |
| Fabric | Poly-Flex II Marine Grade Polyester |
| Color | Haze Gray |
| Height | 33 in |
| Length | 32 in |
| Width | 36 in |
| Water Repellency | Water Repellent |
| UV Protection | UV Resistant |
| Mildew Resistance | Mildew Resistant |
Frequently asked questions
What does this cover fit?
It's a pontoon console cover cut to 33 inches high, 32 inches long, and 36 inches wide. That drapes a standard pontoon helm console. If your console runs larger than that, measure it against the dimensions before ordering.
What is Poly-Flex II?
It's Carver's marine-grade polyester fabric. It's water repellent, UV resistant, and treated to resist mildew, so it holds up to sitting outside season after season.
Does this cover the whole boat?
No. This one covers the console and helm only. If you want to protect the seats and deck too, pair it with a full pontoon cover. This cover's job is the dash.
What color is it?
Haze Gray. It's a neutral gray that won't fight with your hull color and hides road dust well when you're trailering.
Can I leave it on while the boat is stored?
Yes, that's exactly what it's for. Slip it on at the dock, on a lift, or on the trailer between trips to keep the sun and rain off the gauges and controls.
How do I clean it?
Hose it off, spot-clean with mild soap and water, and let it air dry. Skip machine washing and harsh detergents, they strip the water-repellent finish out of the fabric.
